1 |
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache" |
2 |
Setting hash_function to config file value "crc32" |
3 |
Setting storedir to config file value "/usr/local/catalyst" |
4 |
Setting portdir to config file value "/usr/portage" |
5 |
Setting distdir to config file value "/usr/portage/distfiles" |
6 |
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache" |
7 |
Autoresuming support enabled. |
8 |
Kernel cache support enabled. |
9 |
Package cache support enabled. |
10 |
Seed cache support enabled. |
11 |
Snapshot cache support enabled. |
12 |
Use of metadata_overlay module for portage enabled. |
13 |
Envscript support enabled. |
14 |
Using target: stage2 |
15 |
Building natively for hppa |
16 |
Source path set to /usr/local/catalyst/tmp/default/stage1-hppa2.0-20110916/tmp/stage1root/ |
17 |
If this is not desired, remove this directory or turn of seedcache in the options of catalyst.conf |
18 |
the source path will then be /usr/local/catalyst/builds/default/stage1-hppa2.0-20110916.tar.bz2 |
19 |
|
20 |
Caching snapshot to /usr/local/catalyst/snapshot_cache/20110916/ |
21 |
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-stage2-hppa2.0-20110916/ |
22 |
Location of the package cache is /usr/local/catalyst/packages/default/stage2-hppa2.0-20110916/ |
23 |
Location of the kerncache is /usr/local/catalyst/kerncache/default/stage2-hppa2.0-20110916/ |
24 |
Checking for processes running in chroot and killing them. |
25 |
Removing AutoResume Points: ... |
26 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage2-hppa2.0-20110916/ |
27 |
>>> Waiting 10 seconds before starting... |
28 |
>>> (Control-C to abort)... |
29 |
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 |
30 |
clearing autoresume ... |
31 |
Removing AutoResume Points: ... |
32 |
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-stage2-hppa2.0-20110916/ |
33 |
clearing chroot ... |
34 |
Emptying directory /usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/ |
35 |
clearing package cache ... |
36 |
purging the pkgcache ... |
37 |
clearing kerncache ... |
38 |
purging the kerncache ... |
39 |
--- Running action sequence: unpack |
40 |
|
41 |
Starting rsync from /usr/local/catalyst/tmp/default/stage1-hppa2.0-20110916/tmp/stage1root/ |
42 |
to /usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/ (This may take some time) ... |
43 |
|
44 |
--- Running action sequence: unpack_snapshot |
45 |
Valid snapshot cache, skipping unpack of portage tree... |
46 |
--- Running action sequence: config_profile_link |
47 |
Configuring profile link... |
48 |
--- Running action sequence: setup_confdir |
49 |
--- Running action sequence: portage_overlay |
50 |
--- Running action sequence: base_dirs |
51 |
--- Running action sequence: bind |
52 |
--- Running action sequence: chroot_setup |
53 |
Setting up chroot... |
54 |
|
55 |
Warning!!!! |
56 |
Overriding certain env variables may cause catastrophic failure. |
57 |
If your build fails look here first as the possible problem. |
58 |
Catalyst assumes you know what you are doing when setting |
59 |
these variables. |
60 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
61 |
You have been warned |
62 |
|
63 |
--- Running action sequence: setup_environment |
64 |
--- Running action sequence: run_local |
65 |
copying stage2-chroot.sh to /usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/tmp/ |
66 |
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/tmp/ |
67 |
Running stage2-chroot.sh in chroot /usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/ |
68 |
>>> Regenerating /etc/ld.so.cache... |
69 |
|
70 |
Gentoo Linux; http://www.gentoo.org/ |
71 |
Copyright 1999-2011 Gentoo Foundation; Distributed under the GPLv2 |
72 |
------------------------------------------------------------------------------- |
73 |
[[ (0/3) Locating packages ]] |
74 |
* Using baselayout : sys-apps/baselayout |
75 |
* Using portage : portage |
76 |
* Using os-headers : >=sys-kernel/linux-headers-2.6.36.1 |
77 |
* Using binutils : sys-devel/binutils |
78 |
* Using gcc : sys-devel/gcc |
79 |
* Using gettext : gettext |
80 |
* Using libc : virtual/libc |
81 |
* Using texinfo : sys-apps/texinfo |
82 |
* Using zlib : sys-libs/zlib |
83 |
* Using ncurses : sys-libs/ncurses |
84 |
------------------------------------------------------------------------------- |
85 |
[[ (1/3) Configuring environment ]] |
86 |
------------------------------------------------------------------------------- |
87 |
[[ (2/3) Updating portage ]] |
88 |
|
89 |
Performing Global Updates |
90 |
(Could take a couple of minutes if you have a lot of binary packages.) |
91 |
|
92 |
|
93 |
>>> Verifying ebuild manifests |
94 |
>>> Emerging (1 of 1) sys-apps/portage-2.1.10.11 |
95 |
>>> Installing (1 of 1) sys-apps/portage-2.1.10.11 |
96 |
------------------------------------------------------------------------------- |
97 |
[[ (3/3) Emerging packages ]] |
98 |
>>> Verifying ebuild manifests |
99 |
>>> Starting parallel fetch |
100 |
>>> Emerging (1 of 10) app-arch/xz-utils-5.0.3 |
101 |
>>> Failed to emerge app-arch/xz-utils-5.0.3, Log file: |
102 |
>>> '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log' |
103 |
* Package: app-arch/xz-utils-5.0.3 |
104 |
* Repository: gentoo |
105 |
* USE: bootstrap elibc_glibc hppa kernel_linux nls userland_GNU |
106 |
* FEATURES: sandbox |
107 |
|
108 |
XZ Utils 5.0.3 |
109 |
|
110 |
System type: |
111 |
checking build system type... hppa2.0-unknown-linux-gnu |
112 |
checking host system type... hppa2.0-unknown-linux-gnu |
113 |
|
114 |
Configure options: |
115 |
checking if debugging code should be compiled... no |
116 |
checking which encoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc |
117 |
checking which decoders to build... lzma1 lzma2 delta x86 powerpc ia64 arm armthumb sparc |
118 |
checking which match finders to build... hc3 hc4 bt2 bt3 bt4 |
119 |
checking which integrity checks to build... crc32 crc64 sha256 |
120 |
checking if assembler optimizations should be used... no |
121 |
checking if small size is preferred over speed... no |
122 |
checking if threading support is wanted... no |
123 |
checking how much RAM to assume if the real amount is unknown... 128 MiB |
124 |
|
125 |
checking for a shell that conforms to POSIX... /bin/sh |
126 |
|
127 |
Initializing Automake: |
128 |
checking for a BSD-compatible install... /usr/bin/install -c |
129 |
checking whether build environment is sane... yes |
130 |
checking for a thread-safe mkdir -p... /bin/mkdir -p |
131 |
checking for gawk... gawk |
132 |
checking whether make sets $(MAKE)... yes |
133 |
checking whether ln -s works... yes |
134 |
checking for style of include used by make... GNU |
135 |
checking for hppa2.0-unknown-linux-gnu-gcc... hppa2.0-unknown-linux-gnu-gcc |
136 |
checking whether the C compiler works... no |
137 |
configure: error: in `/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3': |
138 |
configure: error: C compiler cannot create executables |
139 |
See `config.log' for more details |
140 |
|
141 |
!!! Please attach the following file when seeking support: |
142 |
!!! /var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3/config.log |
143 |
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase): |
144 |
* econf failed |
145 |
* |
146 |
* Call stack: |
147 |
* ebuild.sh, line 56: Called src_configure |
148 |
* environment, line 2238: Called econf '--enable-nls' '--disable-threads' '--disable-static' |
149 |
* ebuild.sh, line 561: Called die |
150 |
* The specific snippet of code: |
151 |
* die "econf failed" |
152 |
* |
153 |
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3', |
154 |
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'. |
155 |
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'. |
156 |
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'. |
157 |
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3' |
158 |
|
159 |
* Messages for package app-arch/xz-utils-5.0.3: |
160 |
* ERROR: app-arch/xz-utils-5.0.3 failed (configure phase): |
161 |
* econf failed |
162 |
* |
163 |
* Call stack: |
164 |
* ebuild.sh, line 56: Called src_configure |
165 |
* environment, line 2238: Called econf '--enable-nls' '--disable-threads' '--disable-static' |
166 |
* ebuild.sh, line 561: Called die |
167 |
* The specific snippet of code: |
168 |
* die "econf failed" |
169 |
* |
170 |
* If you need support, post the output of 'emerge --info =app-arch/xz-utils-5.0.3', |
171 |
* the complete build log and the output of 'emerge -pqv =app-arch/xz-utils-5.0.3'. |
172 |
* The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/build.log'. |
173 |
* The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.0.3/temp/environment'. |
174 |
* S: '/var/tmp/portage/app-arch/xz-utils-5.0.3/work/xz-5.0.3' |
175 |
|
176 |
|
177 |
!!! catalyst: run script failed. |
178 |
|
179 |
|
180 |
Traceback (most recent call last): |
181 |
File "modules/generic_stage_target.py", line 1207, in run_local |
182 |
"run script failed.",env=self.env) |
183 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd |
184 |
raise CatalystError,myexc |
185 |
CatalystError |
186 |
None |
187 |
|
188 |
!!! catalyst: Stage build aborting due to error. |
189 |
|
190 |
Traceback (most recent call last): |
191 |
File "/usr/lib/catalyst/catalyst", line 209, in build_target |
192 |
mytarget.run() |
193 |
File "modules/generic_stage_target.py", line 1263, in run |
194 |
apply(getattr(self,x)) |
195 |
File "modules/generic_stage_target.py", line 1212, in run_local |
196 |
raise CatalystError,"Stage build aborting due to error." |
197 |
CatalystError |
198 |
!!! catalyst: Error encountered during run of target stage2 |
199 |
Catalyst aborting.... |
200 |
lockfile does not exist '/usr/local/catalyst/tmp/default/stage2-hppa2.0-20110916/.catalyst_lock' |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.2266/log/hppa2.0_stage2.log |