[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage1.spec

checking whether make sets $(MAKE)... (cached) yes
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking linux/compiler.h usability... no
checking linux/compiler.h presence... no
checking for linux/compiler.h... no
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking whether x86_64-pc-linux-gnu-gcc needs -traditional... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for gethostbyname... yes
checking for gethostname... yes
checking for memset... yes
checking for strerror... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
make  all-am
make[1]: Entering directory `/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I.@am__isrc@     -O2 -pipe -c probe.c
x86_64-pc-linux-gnu-gcc  -O2 -pipe  -Wl,-O1 -Wl,--as-needed -o arrayprobe probe.o  
make[1]: Leaving directory `/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
make[1]: Entering directory `/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
make[1]: Nothing to be done for `install-data-am'.
 @MKDIR_P@ '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/image//usr/bin'
/bin/sh: line 3: @MKDIR_P@: command not found
make[1]: *** [install-binPROGRAMS] Error 1
make[1]: Leaving directory `/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
make: *** [install-am] Error 2
 * ERROR: sys-apps/arrayprobe-2.0-r2::gentoo failed (install phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=sys-apps/arrayprobe-2.0-r2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-apps/arrayprobe-2.0-r2::gentoo'`.
 * The complete build log is located at '/var/log/portage/sys-apps:arrayprobe-2.0-r2:20140825-110557.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
 * S: '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
 * QA Notice: command not found:
 * 
 * 	/bin/sh: line 3: @MKDIR_P@: command not found

 * Messages for package app-crypt/bcwipe-1.9.8:

 * The BestCrypt drivers are not free - Please purchace a license from 
 * http://www.jetico.com/
 * full details /usr/share/doc/bcwipe-1.9.8/html/bcwipe-help/wu_licen.htm

 * Messages for package net-misc/vconfig-1.9:

 * MTU problems exist for many ethernet drivers.
 * Reduce the MTU on the interface to 1496 to work around them.

 * Messages for package sys-apps/keyutils-1.5.9-r1:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package sys-apps/chname-1.0-r1:

 * Note: chname requires a or later kernel with CONFIG_UTS_NS=y.

 * Messages for package sys-block/tw_cli-10.2:

 * This binary supports should support ALL cards, including, but not
 * limited to the following series:
 * 
 * PATA: 6xxx, 72xx, 74xx, 78xx, 7000, 7500, 7506
 * SATA: 8006, 8500, 8506, 9500S, 9550SX, 9590SE,
 *       9550SXU, 9650SE, 9650SE-{24M8,4LPME},
 *       9690SA, 9750
 * 
 * Release notes for this version are available at:
 * http://www.lsi.com/DistributionSystem/AssetDocument/10.2_Release_Notes_Web.pdf
 * Upstream's 10.2 release is missing the tw_cli manpage.

 * Messages for package sys-apps/busybox-1.21.0:

 * Could not locate user configfile, so we will save a default one
 * You cannot have USE='static pam'.  Assuming static is more important.
 * Your configuration for sys-apps/busybox-1.21.0 has been saved in 
 * /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-dialup/ppp-2.4.7:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Pon, poff and plog scripts have been supplied for experienced users.
 * Users needing particular scripts (ssh,rsh,etc.) should check out the
 * /usr/share/doc/ppp-2.4.7/scripts directory.

 * Messages for package net-misc/bridge-utils-1.5:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version

 * Messages for package app-misc/screen-4.0.3-r6:

 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.

 * Messages for package net-dialup/rp-pppoe-3.8-r2:

 * Use pppoe-setup to configure your dialup connection.

 * Messages for package sys-apps/arrayprobe-2.0-r2:

 * ERROR: sys-apps/arrayprobe-2.0-r2::gentoo failed (install phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=sys-apps/arrayprobe-2.0-r2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-apps/arrayprobe-2.0-r2::gentoo'`.
 * The complete build log is located at '/var/log/portage/sys-apps:arrayprobe-2.0-r2:20140825-110557.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'
 * S: '/var/tmp/portage/sys-apps/arrayprobe-2.0-r2/work/arrayprobe-2.0'

!!! existing preserved libs found

!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1403, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1408, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage1-amd64-20140825/.catalyst_lock'



Full build log at /home/release/tmp/run/catalyst-auto.5111/log/hardened_admincd-stage1.log