Gentoo Archives: gentoo-releng-autobuilds

From: catalyst@×××××××××××××××××.org
To: releng@g.o, gentoo-releng-autobuilds@l.g.o
Subject: [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - stage2.spec
Date: Mon, 15 Jun 2020 22:15:03
Message-Id: 20200615221458.6B10120823@nightheron.gentoo.org
1 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: unpack_snapshot
2 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: setup_confdir
3 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: portage_overlay
4 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: base_dirs
5 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: bind
6 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: chroot_setup
7 15 Jun 2020 22:12:11 UTC: NOTICE : Setting up chroot...
8 NOTICE:catalyst:Setting up chroot...
9 15 Jun 2020 22:12:11 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
10 WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
11 15 Jun 2020 22:12:11 UTC: WARNING : If your build fails look here first as the possible problem.
12 WARNING:catalyst:If your build fails look here first as the possible problem.
13 15 Jun 2020 22:12:11 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
15 15 Jun 2020 22:12:11 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
17 15 Jun 2020 22:12:11 UTC: WARNING : You have been warned.
18 WARNING:catalyst:You have been warned.
19 15 Jun 2020 22:12:11 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/etc/portage/make.conf
20 NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/etc/portage/make.conf
21 15 Jun 2020 22:12:11 UTC: NOTICE : STICKY-CONFIG is enabled
22 NOTICE:catalyst:STICKY-CONFIG is enabled
23 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: setup_environment
24 NOTICE:catalyst:--- Running action sequence: setup_environment
25 15 Jun 2020 22:12:11 UTC: NOTICE : --- Running action sequence: run_local
26 NOTICE:catalyst:--- Running action sequence: run_local
27 Copying stage2-chroot.sh to /tmp
28 copying stage2-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/tmp
29 copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/tmp
30 Ensure the file has the executable bit set
31 Running stage2-chroot.sh in chroot:
32 setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z /tmp/stage2-chroot.sh
33 >>> Regenerating /etc/ld.so.cache...
34
35 Gentoo Linux; http://www.gentoo.org/
36 Copyright 1999-2020 Gentoo Authors; Distributed under the GPLv2
37 -------------------------------------------------------------------------------
38 [[ (0/3) Locating packages ]]
39 * Using baselayout : >=sys-apps/baselayout-2
40 * Using portage : sys-apps/portage
41 * Using os-headers : >=sys-kernel/linux-headers-5.4-r1
42 * Using binutils : sys-devel/binutils
43 * Using gcc : sys-devel/gcc
44 * Using gettext : sys-devel/gettext
45 * Using libc : sys-libs/glibc:2.2
46 * Using texinfo : sys-apps/texinfo
47 * Using zlib : sys-libs/zlib
48 * Using ncurses : sys-libs/ncurses
49 -------------------------------------------------------------------------------
50 [[ (1/3) Configuring environment ]]
51 -------------------------------------------------------------------------------
52 [[ (2/3) Updating portage ]]
53
54 Performing Global Updates
55 (Could take a couple of minutes if you have a lot of binary packages.)
56
57
58 >>> Running pre-merge checks for sys-apps/portage-2.3.99-r2
59 * Checking for suitable kernel configuration options...
60 [ ok ]
61 >>> Emerging binary (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
62 >>> Installing (1 of 1) sys-apps/portage-2.3.99-r2::gentoo
63 -------------------------------------------------------------------------------
64 [[ (3/3) Emerging packages ]]
65 >>> Verifying ebuild manifests
66 >>> Running pre-merge checks for sys-libs/glibc-2.30-r8
67 * Checking general environment sanity.
68 i486-pc-linux-gnu-gcc -march=i486 -pipe -O2 -Wl,-O1 -Wl,--as-needed glibc-test.c -o glibc-test
69 * Checking gcc for __thread support ...
70 [ ok ]
71 * Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ...
72 [ ok ]
73 * Checking linux-headers version (5.4.0 >= 3.2.0) ...
74 [ ok ]
75 >>> Running pre-merge checks for sys-devel/gcc-9.3.0
76 >>> Emerging binary (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
77 >>> Installing (1 of 16) sys-libs/zlib-1.2.11-r2::gentoo
78 >>> Emerging binary (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
79 >>> Installing (2 of 16) sys-apps/baselayout-2.6-r1::gentoo
80 >>> Emerging binary (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
81 >>> Installing (3 of 16) sys-kernel/linux-headers-5.4-r1::gentoo
82 >>> Emerging binary (4 of 16) sys-libs/glibc-2.30-r8::gentoo
83 >>> Emerging binary (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
84 >>> Installing (4 of 16) sys-libs/glibc-2.30-r8::gentoo
85 >>> Installing (5 of 16) sys-devel/binutils-2.33.1-r1::gentoo
86 >>> Emerging binary (6 of 16) sys-devel/gettext-0.20.1::gentoo
87 >>> Installing (6 of 16) sys-devel/gettext-0.20.1::gentoo
88 >>> Emerging binary (7 of 16) sys-devel/gcc-9.3.0::gentoo
89 >>> Emerging binary (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
90 >>> Emerging binary (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
91 >>> Installing (8 of 16) virtual/perl-File-Spec-3.780.0::gentoo
92 >>> Emerging binary (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
93 >>> Emerging binary (11 of 16) virtual/perl-version-0.992.400::gentoo
94 >>> Installing (9 of 16) dev-perl/Text-Unidecode-1.300.0::gentoo
95 >>> Emerging binary (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
96 >>> Emerging binary (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
97 >>> Installing (10 of 16) virtual/perl-Carp-1.500.0-r2::gentoo
98 >>> Installing (11 of 16) virtual/perl-version-0.992.400::gentoo
99 >>> Installing (12 of 16) dev-perl/Unicode-EastAsianWidth-1.330.0-r1::gentoo
100 >>> Installing (13 of 16) dev-perl/Class-Inspector-1.320.0::gentoo
101 >>> Emerging binary (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
102 >>> Installing (14 of 16) dev-perl/File-ShareDir-1.104.0::gentoo
103 >>> Installing (7 of 16) sys-devel/gcc-9.3.0::gentoo
104 >>> Emerging binary (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
105 >>> Installing (15 of 16) dev-perl/libintl-perl-1.310.0::gentoo
106 >>> Emerging (16 of 16) sys-apps/texinfo-6.7::gentoo
107 >>> Failed to emerge sys-apps/texinfo-6.7
108 * Messages for package sys-apps/baselayout-2.6-r1:
109 * The following users have non-existent shells!
110 * halt - /sbin/halt
111 * shutdown - /sbin/shutdown
112 * Messages for package sys-devel/gcc-9.3.0:
113 * If you have issues with packages unable to locate libstdc++.la,
114 * then try running 'fix_libtool_files.sh' on the old gcc versions.
115 * You might want to review the GCC upgrade guide when moving between
116 * major versions (like 4.2 to 4.3):
117 * https://wiki.gentoo.org/wiki/Upgrading_GCC
118 * Messages for package sys-apps/texinfo-6.7:
119 * ERROR: sys-apps/texinfo-6.7::gentoo failed (compile phase):
120 * emake failed
121 *
122 * If you need support, post the output of `emerge --info '=sys-apps/texinfo-6.7::gentoo'`,
123 * the complete build log and the output of `emerge -pqv '=sys-apps/texinfo-6.7::gentoo'`.
124 * The complete build log is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/build.log'.
125 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/texinfo-6.7/temp/environment'.
126 * Working directory: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'
127 * S: '/var/tmp/portage/sys-apps/texinfo-6.7/work/texinfo-6.7'
128
129
130
131
132
133
134
135 * IMPORTANT: config file '/etc/locale.gen' needs updating.
136 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
137 * sections of the emerge man page to learn how to update config files.
138 15 Jun 2020 22:14:58 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
139 ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
140 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
141 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
142 15 Jun 2020 22:14:58 UTC: ERROR : CatalystError: Stage build aborting due to error.
143 ERROR:catalyst:CatalystError: Stage build aborting due to error.
144 15 Jun 2020 22:14:58 UTC: ERROR : Exception running action sequence run_local
145 Traceback (most recent call last):
146 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
147 env=self.env)
148 File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
149 print_traceback=False)
150 catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
151
152 During handling of the above exception, another exception occurred:
153
154 Traceback (most recent call last):
155 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
156 getattr(self, x)()
157 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
158 print_traceback=False)
159 catalyst.support.CatalystError: Stage build aborting due to error.
160 ERROR:catalyst:Exception running action sequence run_local
161 Traceback (most recent call last):
162 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
163 env=self.env)
164 File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
165 print_traceback=False)
166 catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage2/stage2-controller.sh', 'run']) exited 1
167
168 During handling of the above exception, another exception occurred:
169
170 Traceback (most recent call last):
171 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
172 getattr(self, x)()
173 File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
174 print_traceback=False)
175 catalyst.support.CatalystError: Stage build aborting due to error.
176 15 Jun 2020 22:14:58 UTC: NOTICE : Cleaning up... Running unbind()
177 NOTICE:catalyst:Cleaning up... Running unbind()
178 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/tmp/kerncache is not a mount point. Skipping
179 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/tmp/kerncache is not a mount point. Skipping
180 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/cache/binpkgs is not a mount point. Skipping
181 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/cache/binpkgs is not a mount point. Skipping
182 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/run is not a mount point. Skipping
183 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/run is not a mount point. Skipping
184 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev/shm does not exist. Skipping
185 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev/shm does not exist. Skipping
186 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev/pts does not exist. Skipping
187 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev/pts does not exist. Skipping
188 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
189 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/tmp/portage is not a mount point. Skipping
190 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/cache/distfiles is not a mount point. Skipping
191 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/cache/distfiles is not a mount point. Skipping
192 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/db/repos/gentoo is not a mount point. Skipping
193 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/var/db/repos/gentoo is not a mount point. Skipping
194 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev is not a mount point. Skipping
195 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/dev is not a mount point. Skipping
196 15 Jun 2020 22:14:58 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/proc is not a mount point. Skipping
197 NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage2-i486-20200615T214503Z/proc is not a mount point. Skipping
198 Command exited with non-zero status 2
199 159.37user 58.65system 2:50.48elapsed 127%CPU (0avgtext+0avgdata 70296maxresident)k
200 144176inputs+1730360outputs (2major+8772222minor)pagefaults 0swaps
201
202
203
204 Full build log at /release/tmp/run/catalyst-auto.20200615T214503Z.pZFfqI/log/stage2.log