[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - installcd-stage2-minimal.spec

* configfile and remove those that you do not want.
 * Messages for package sys-kernel/genkernel-3.5.3.3:
 * Documentation is available in the genkernel manual page
 * as well as the following URL:
 * https://wiki.gentoo.org/wiki/Genkernel
 * This package is known to not work with reiser4.  If you are running
 * reiser4 and have a problem, do not file a bug.  We know it does not
 * work and we don't plan on fixing it since reiser4 is the one that is
 * broken in this regard.  Try using a sane filesystem like ext4.
 * The LUKS support has changed from versions prior to 3.4.4.  Now,
 * you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.




removing /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180708T021904Z/tmp/pre-kmerge.sh from the chroot
removing /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180708T021904Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180708T021904Z/tmp
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180708T021904Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
    chroot /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180708T021904Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... OK
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources
>>> Emerging binary (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
 * Messages for package sys-kernel/gentoo-sources-4.14.52:
 * If you are upgrading from a previous kernel, you may be interested
 * in the following document:
 *   - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade


Adjusting /usr/src/linux to point to /usr/src/linux-4.14.52-gentoo
* Gentoo Linux Genkernel; Version 3.5.3.3
* Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils sys-apps/pcmciautils sys-kernel/linux-firmware --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20180708T021904Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20180708T021904Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20180708T021904Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.14.52-gentoo for x86_64...
* .. with config file /var/tmp/gentoo.config
* kernel: Using config from /var/tmp/gentoo.config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
*         >> Compiling 4.14.52-gentoo bzImage...
* ERROR: Failed to compile the "bzImage" target...
* 
* -- Grepping log... --
* 
*  SHIPPED scripts/kconfig/zconf.lex.c
*  SHIPPED scripts/kconfig/zconf.tab.c
*  HOSTCC  scripts/kconfig/zconf.tab.o
*  HOSTLD  scripts/kconfig/conf
*scripts/kconfig/conf  --oldconfig Kconfig
*.config:573:warning: symbol value 'm' invalid for CPU_FREQ_STAT
*--
*Allow for memory hot-add (MEMORY_HOTPLUG) [N/y] n
*Allow for memory compaction (COMPACTION) [N/y/?] n
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
*  Allow upgrading ACPI tables via initrd (ACPI_TABLE_UPGRADE) [Y/n/?] (NEW) 
*  Debug Statements (ACPI_DEBUG) [N/y/?] n
*  PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] n
*  Hardware Error Device (ACPI_HED) [N/m/y/?] n
*  Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [N/m/y/?] n
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] n
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] n
*  ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
*  Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
*  PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
*      PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
*--
*  * Wireless
*  *
*  Wireless (WIRELESS) [Y] y
*    cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
*      nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
*      enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [N/m/y/?] n
*SCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
*  Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [Y/n/m/?] y
*Verbose SCSI error reporting (kernel size += 36K) (SCSI_CONSTANTS) [Y/n/?] y
*--
*OSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [M/n/y/?] m
*  Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
*  iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*  Intel OPA VNIC support (INFINIBAND_OPA_VNIC) [N/m/?] (NEW) 
*  RDMA verbs transport library (INFINIBAND_RDMAVT) [N/m/?] (NEW) 
*  Software RDMA over Ethernet (RoCE) driver (RDMA_RXE) [N/m/?] (NEW) 
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [N/m/y/?] n
*--
*  JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [Y/n/m/?] y
*  XFS Quota support (XFS_QUOTA) [Y/n/?] y
*  XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
*  XFS Realtime subvolume support (XFS_RT) [Y/n/?] y
*  XFS Verbose Warnings (XFS_WARN) [N/y/?] n
*--
*Dnotify support (DNOTIFY) [Y/n/?] y
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [N/y/?] n
*Quota support (QUOTA) [Y/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] n
*Force round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW) 
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Enable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW) 
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
*--
*  AR      drivers/usb/core/usbcore.o
*  AR      drivers/usb/core/built-in.o
*  AR      drivers/usb/built-in.o
*make[4]: *** Deleting file 'drivers/video/fbdev/core/fb_defio.o'
*make[3]: *** [scripts/Makefile.build:587: drivers/video/fbdev/core] Terminated
*make[2]: *** [scripts/Makefile.build:587: drivers/video/fbdev] Error 2
*make[1]: *** [scripts/Makefile.build:587: drivers/video] Error 2
*make: *** [Makefile:1034: drivers] Error 2
*--
* Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils sys-apps/pcmciautils sys-kernel/linux-firmware --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20180708T021904Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20180708T021904Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20180708T021904Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "bzImage" target...
* 
* -- End log... --
* 
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@g.o. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
* 
* Please do *not* report compilation failures as genkernel bugs!
* 
08 Jul 2018 15:32:13 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Jul 2018 15:32:14 UTC: ERROR   : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1
08 Jul 2018 15:32:14 UTC: ERROR   : Exception running action sequence build_kernel
Traceback (most recent call last):
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1455, in run
    getattr(self, x)()
  File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1581, in build_kernel
    print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
08 Jul 2018 15:32:14 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
936.30user 83.41system 10:42:59elapsed 2%CPU (0avgtext+0avgdata 485920maxresident)k
0inputs+6523720outputs (0major+55604992minor)pagefaults 0swaps



Full build log at /home/release/tmp/run/catalyst-auto.20180708T021904Z.GMEtfA/log/installcd-stage2-minimal.log