1 |
/usr/lib/gcc/hppa1.1-unknown-linux-gnu/11.2.1/../../../../hppa1.1-unknown-linux-gnu/bin/ld: ./.libs/libgcrypt.so: undefined reference to `__udiv_qrnnd' |
2 |
collect2: error: ld returned 1 exit status |
3 |
make[2]: *** [Makefile:751: mpicalc] Error 1 |
4 |
make[2]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4-.hppa/src' |
5 |
make[1]: *** [Makefile:502: all-recursive] Error 1 |
6 |
make[1]: Leaving directory '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4-.hppa' |
7 |
make: *** [Makefile:434: all] Error 2 |
8 |
* ERROR: dev-libs/libgcrypt-1.9.4-r1::gentoo failed (compile phase): |
9 |
* emake failed |
10 |
* |
11 |
* If you need support, post the output of `emerge --info '=dev-libs/libgcrypt-1.9.4-r1::gentoo'`, |
12 |
* the complete build log and the output of `emerge -pqv '=dev-libs/libgcrypt-1.9.4-r1::gentoo'`. |
13 |
* The complete build log is located at '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/temp/build.log'. |
14 |
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/temp/environment'. |
15 |
* Working directory: '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4-.hppa' |
16 |
* S: '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4' |
17 |
* Messages for package sys-apps/portage-3.0.30-r3: |
18 |
* Unable to check for the following kernel config options due |
19 |
* to absence of any configured kernel sources or compiled |
20 |
* config: |
21 |
* - IPC_NS |
22 |
* - PID_NS |
23 |
* - NET_NS |
24 |
* - UTS_NS |
25 |
* You're on your own to make sure they are set if needed. |
26 |
* Messages for package sys-libs/gpm-1.20.7-r4: |
27 |
* Unable to find kernel sources at /usr/src/linux |
28 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
29 |
* Unable to check for the following kernel config options due |
30 |
* to absence of any configured kernel sources or compiled |
31 |
* config: |
32 |
* - INPUT_MOUSEDEV - CONFIG_INPUT_MOUSEDEV: is not set (required to expose mice for GPM) |
33 |
* You're on your own to make sure they are set if needed. |
34 |
* Messages for package acct-group/sockd-0: |
35 |
* Adding group 'sockd' to your system ... |
36 |
* - Groupid: 214 |
37 |
* Messages for package acct-group/ntp-0-r1: |
38 |
* Adding group 'ntp' to your system ... |
39 |
* - Groupid: 123 |
40 |
* Messages for package net-misc/dhcpcd-9.4.1: |
41 |
* |
42 |
* dhcpcd has zeroconf support active by default. |
43 |
* This means it will always obtain an IP address even if no |
44 |
* DHCP server can be contacted, which will break any existing |
45 |
* failover support you may have configured in your net configuration. |
46 |
* This behaviour can be controlled with the noipv4ll configuration |
47 |
* file option or the -L command line switch. |
48 |
* See the dhcpcd and dhcpcd.conf man pages for more details. |
49 |
* |
50 |
* Dhcpcd has duid enabled by default, and this may cause issues |
51 |
* with some dhcp servers. For more information, see |
52 |
* https://bugs.gentoo.org/show_bug.cgi?id=477356 |
53 |
* |
54 |
* If you activate the lookup-hostname hook to look up your hostname |
55 |
* using the dns, you need to install net-dns/bind-tools. |
56 |
* Messages for package net-misc/vconfig-1.9: |
57 |
* MTU problems exist for many ethernet drivers. |
58 |
* Reduce the MTU on the interface to 1496 to work around them. |
59 |
* Messages for package acct-user/sockd-0-r1: |
60 |
* Adding user 'sockd' to your system ... |
61 |
* - Userid: 214 |
62 |
* - Shell: /sbin/nologin |
63 |
* - Home: /dev/null |
64 |
* - Groups: sockd |
65 |
* - GECOS: added by portage for sockd |
66 |
* Updating comment for user 'sockd' ... |
67 |
* - Comment: A user for net-proxy/dante |
68 |
* Messages for package acct-user/ntp-0-r1: |
69 |
* Adding user 'ntp' to your system ... |
70 |
* - Userid: 123 |
71 |
* - Shell: /sbin/nologin |
72 |
* - Home: /dev/null |
73 |
* - Groups: ntp |
74 |
* - GECOS: added by portage for ntp |
75 |
* Updating comment for user 'ntp' ... |
76 |
* - Comment: user for ntp daemon |
77 |
* Messages for package acct-group/mail-0-r1: |
78 |
* Adding group 'mail' to your system ... |
79 |
* - Groupid: 12 |
80 |
* Messages for package sys-apps/coreutils-8.32-r1: |
81 |
* Make sure you run 'hash -r' in your active shells. |
82 |
* You should also re-source your shell settings for LS_COLORS |
83 |
* changes, such as: source /etc/profile |
84 |
* Messages for package sys-apps/util-linux-2.37.4: |
85 |
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers. |
86 |
* Messages for package dev-libs/glib-2.70.4: |
87 |
* Unable to check for the following kernel config options due |
88 |
* to absence of any configured kernel sources or compiled |
89 |
* config: |
90 |
* - INOTIFY_USER |
91 |
* You're on your own to make sure they are set if needed. |
92 |
* Messages for package sys-fs/mdadm-4.1: |
93 |
* If you're not relying on kernel auto-detect of your RAID |
94 |
* devices, you need to add 'mdraid' to your 'boot' runlevel: |
95 |
* rc-update add mdraid boot |
96 |
* Messages for package dev-python/ssl-fetch-0.4-r1: |
97 |
* This is beta software. |
98 |
* The APIs it installs should be considered unstable |
99 |
* and are subject to change in these early versions. |
100 |
* |
101 |
* Please file any enhancement requests, or bugs |
102 |
* at https://github.com/dol-sen/ssl-fetch/issues |
103 |
* Messages for package sys-apps/openrc-0.44.10: |
104 |
* Setting the console font does not work on all HPPA consoles. |
105 |
* You can still enable it by running: |
106 |
* # rc-update add consolefont boot |
107 |
* You have emerged OpenRc without network support. This |
108 |
* means you need to SET UP a network manager such as |
109 |
* net-misc/netifrc, net-misc/dhcpcd, net-misc/connman, |
110 |
* net-misc/NetworkManager, or net-vpn/badvpn. |
111 |
* Or, you have the option of emerging openrc with the newnet |
112 |
* use flag and configuring /etc/conf.d/network and |
113 |
* /etc/conf.d/staticroute if you only use static interfaces. |
114 |
* |
115 |
* Messages for package sys-fs/udev-249.6-r2: |
116 |
* Unable to find kernel sources at /usr/src/linux |
117 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
118 |
* Unable to check for the following kernel config options due |
119 |
* to absence of any configured kernel sources or compiled |
120 |
* config: |
121 |
* - BLK_DEV_BSG |
122 |
* - DEVTMPFS |
123 |
* - IDE |
124 |
* - INOTIFY_USER |
125 |
* - SYSFS_DEPRECATED |
126 |
* - SYSFS_DEPRECATED_V2 |
127 |
* - SIGNALFD |
128 |
* - EPOLL |
129 |
* - FHANDLE |
130 |
* - NET |
131 |
* - FW_LOADER_USER_HELPER |
132 |
* - UNIX |
133 |
* You're on your own to make sure they are set if needed. |
134 |
* Messages for package dev-libs/libgcrypt-1.9.4-r1: |
135 |
* ERROR: dev-libs/libgcrypt-1.9.4-r1::gentoo failed (compile phase): |
136 |
* emake failed |
137 |
* |
138 |
* If you need support, post the output of `emerge --info '=dev-libs/libgcrypt-1.9.4-r1::gentoo'`, |
139 |
* the complete build log and the output of `emerge -pqv '=dev-libs/libgcrypt-1.9.4-r1::gentoo'`. |
140 |
* The complete build log is located at '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/temp/build.log'. |
141 |
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/temp/environment'. |
142 |
* Working directory: '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4-.hppa' |
143 |
* S: '/var/tmp/portage/dev-libs/libgcrypt-1.9.4-r1/work/libgcrypt-1.9.4' |
144 |
|
145 |
|
146 |
|
147 |
|
148 |
|
149 |
|
150 |
|
151 |
|
152 |
|
153 |
|
154 |
|
155 |
|
156 |
|
157 |
|
158 |
|
159 |
|
160 |
|
161 |
|
162 |
|
163 |
|
164 |
|
165 |
|
166 |
|
167 |
|
168 |
|
169 |
|
170 |
|
171 |
|
172 |
|
173 |
|
174 |
|
175 |
|
176 |
|
177 |
|
178 |
12 May 2022 15:06:52 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1 |
179 |
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1 |
180 |
12 May 2022 15:06:52 EDT: ERROR : Exception running action sequence build_packages |
181 |
Traceback (most recent call last): |
182 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence |
183 |
func() |
184 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1549, in build_packages |
185 |
cmd(command, env=self.env) |
186 |
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd |
187 |
raise CatalystError('cmd(%r) exited %s' % (args, ret), |
188 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1 |
189 |
ERROR:catalyst:Exception running action sequence build_packages |
190 |
Traceback (most recent call last): |
191 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 38, in run_sequence |
192 |
func() |
193 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1549, in build_packages |
194 |
cmd(command, env=self.env) |
195 |
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 66, in cmd |
196 |
raise CatalystError('cmd(%r) exited %s' % (args, ret), |
197 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/controller.sh', 'build_packages', 'app-admin/hddtemp', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'dev-util/debootstrap', 'net-analyzer/traceroute', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/vconfig', 'net-proxy/dante', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/pciutils', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-devel/bc', 'sys-devel/binutils-hppa64', 'sys-devel/kgcc64', 'sys-fs/cryptsetup', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'www-client/links']) exited 1 |
198 |
Command exited with non-zero status 2 |
199 |
7945.08user 3037.73system 4:02:04elapsed 75%CPU (0avgtext+0avgdata 97828maxresident)k |
200 |
633864inputs+3999704outputs (1049major+28955337minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.20220512T073306Z.7RgdZd/log/installcd-stage1.log |