1 |
Applying io_quotes_use to linux/usb/tmc.h |
2 |
Applying io_quotes_use to linux/fuse.h |
3 |
Applying io_quotes_use to linux/vm_sockets.h |
4 |
Applying io_quotes_use to linux/nbd.h |
5 |
Applying io_quotes_use to linux/cm4000_cs.h |
6 |
Applying io_quotes_use to linux/synclink.h |
7 |
Applying io_quotes_def to linux/pci_regs.h |
8 |
Applying io_quotes_use to linux/genwqe/genwqe_card.h |
9 |
Applying io_quotes_use to linux/hsi/hsi_char.h |
10 |
Applying io_quotes_use to linux/hsi/cs-protocol.h |
11 |
Applying io_quotes_use to linux/auto_fs.h |
12 |
Applying io_quotes_use to linux/phantom.h |
13 |
Applying io_quotes_use to linux/blkzoned.h |
14 |
Applying io_quotes_use to linux/aspeed-lpc-ctrl.h |
15 |
Applying io_quotes_use to linux/uinput.h |
16 |
Applying io_quotes_use to linux/lightnvm.h |
17 |
Applying io_quotes_use to linux/vtpm_proxy.h |
18 |
Applying io_quotes_use to linux/random.h |
19 |
Applying io_quotes_use to linux/wmi.h |
20 |
Applying io_quotes_use to linux/pktcdvd.h |
21 |
Applying io_quotes_use to linux/vfio.h |
22 |
Applying io_quotes_use to linux/ipmi_bmc.h |
23 |
Applying io_quotes_use to linux/fd.h |
24 |
Applying io_quotes_use to linux/fpga-dfl.h |
25 |
Applying io_quotes_use to linux/psp-sev.h |
26 |
Applying io_quotes_use to linux/cciss_ioctl.h |
27 |
Applying io_quotes_use to linux/gpio.h |
28 |
Applying io_quotes_use to linux/if_pppox.h |
29 |
Applying io_quotes_use to linux/rfkill.h |
30 |
Applying io_quotes_use to linux/btrfs.h |
31 |
Applying io_quotes_use to linux/watchdog.h |
32 |
Applying io_quotes_use to linux/omapfb.h |
33 |
Applying io_quotes_use to linux/fs.h |
34 |
Applying io_quotes_use to linux/dm-ioctl.h |
35 |
Applying io_quotes_use to linux/dn.h |
36 |
Applying io_quotes_def to linux/soundcard.h |
37 |
Applying io_quotes_use to linux/rpmsg.h |
38 |
Applying io_quotes_use to linux/vhost.h |
39 |
Applying io_quotes_def to linux/version.h |
40 |
Applying io_quotes_use to linux/userfaultfd.h |
41 |
Applying io_quotes_use to linux/atmbr2684.h |
42 |
Applying io_quotes_use to linux/ndctl.h |
43 |
Applying io_quotes_use to linux/raw.h |
44 |
Applying io_quotes_use to linux/vboxguest.h |
45 |
Applying io_quotes_use to linux/dma-buf.h |
46 |
Applying io_quotes_use to linux/sync_file.h |
47 |
Applying io_quotes_use to linux/mmtimer.h |
48 |
Applying io_quotes_use to linux/bt-bmc.h |
49 |
Applying io_quotes_use to linux/kvm.h |
50 |
Applying io_quotes_use to linux/ipmi.h |
51 |
Applying io_quotes_use to linux/ppdev.h |
52 |
Applying io_quotes_use to linux/gigaset_dev.h |
53 |
Applying io_quotes_use to linux/agpgart.h |
54 |
Applying io_quotes_use to linux/rio_cm_cdev.h |
55 |
Applying io_quotes_use to asm/vmcp.h |
56 |
Applying io_quotes_use to asm/dasd.h |
57 |
Applying io_quotes_use to asm/cmb.h |
58 |
Applying io_quotes_use to asm/pkey.h |
59 |
Applying io_quotes_use to asm/chsc.h |
60 |
Applying io_quotes_use to asm/zcrypt.h |
61 |
Applying io_quotes_use to asm/clp.h |
62 |
Applying io_quotes_use to sys/mount.h |
63 |
Applying io_quotes_use to sys/raw.h |
64 |
Applying ctrl_quotes_def to readline/chardefs.h |
65 |
Applying io_quotes_def to proc/version.h |
66 |
Applying pthread_incomplete_struct_argument to pthread.h |
67 |
Applying io_quotes_use to mtd/ubi-user.h |
68 |
Applying machine_name to openssl/e_os2.h |
69 |
Applying glibc_stdint to stdint.h |
70 |
Applying io_quotes_def to curl/curlver.h |
71 |
Cleaning up unneeded directories: |
72 |
fixincludes is done |
73 |
echo timestamp > stmp-fixinc |
74 |
rm gcc.pod |
75 |
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build/gcc' |
76 |
make[2]: *** [Makefile:4663: all-stage1-gcc] Error 2 |
77 |
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build' |
78 |
make[1]: *** [Makefile:19715: stage1-bubble] Error 2 |
79 |
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build' |
80 |
make: *** [Makefile:20047: bootstrap-lean] Error 2 |
81 |
* ERROR: sys-devel/gcc-9.2.0-r2::gentoo failed (compile phase): |
82 |
* emake failed |
83 |
* |
84 |
* If you need support, post the output of `emerge --info '=sys-devel/gcc-9.2.0-r2::gentoo'`, |
85 |
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-9.2.0-r2::gentoo'`. |
86 |
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/build.log'. |
87 |
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/environment'. |
88 |
* Working directory: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build' |
89 |
* S: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-9.2.0' |
90 |
* |
91 |
* Please include /var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-build-logs.tar.bz2 in your bug report. |
92 |
* |
93 |
* Messages for package sys-apps/portage-2.3.79 merged to /tmp/stage1root/: |
94 |
* Unable to find kernel sources at /tmp/stage1root/usr/src/linux |
95 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
96 |
* Unable to check for the following kernel config options due |
97 |
* to absence of any configured kernel sources or compiled |
98 |
* config: |
99 |
* - IPC_NS |
100 |
* - PID_NS |
101 |
* - NET_NS |
102 |
* You're on your own to make sure they are set if needed. |
103 |
* Messages for package sys-libs/timezone-data-2019c merged to /tmp/stage1root/: |
104 |
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone. |
105 |
* Setting /tmp/stage1root/etc/localtime to Factory. |
106 |
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/: |
107 |
* The following users have non-existent shells! |
108 |
* halt - /sbin/halt |
109 |
* shutdown - /sbin/shutdown |
110 |
* Messages for package sys-apps/coreutils-8.30 merged to /tmp/stage1root/: |
111 |
* Make sure you run 'hash -r' in your active shells. |
112 |
* You should also re-source your shell settings for LS_COLORS |
113 |
* changes, such as: source /etc/profile |
114 |
* Messages for package sys-apps/util-linux-2.33.2 merged to /tmp/stage1root/: |
115 |
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers. |
116 |
* The agetty util now clears the terminal by default. You |
117 |
* might want to add --noclear to your /etc/inittab lines. |
118 |
* Messages for package sys-apps/shadow-4.6 merged to /tmp/stage1root/: |
119 |
* Running 'grpck' returned errors. Please run it by hand, and then |
120 |
* run 'grpconv' afterwards! |
121 |
* Messages for package dev-lang/python-3.6.9 merged to /tmp/stage1root/: |
122 |
* You have configured Python without XML support. |
123 |
* This is NOT a recommended configuration as you |
124 |
* may face problems parsing any XML documents. |
125 |
* Messages for package dev-lang/python-2.7.17 merged to /tmp/stage1root/: |
126 |
* You have configured Python without XML support. |
127 |
* This is NOT a recommended configuration as you |
128 |
* may face problems parsing any XML documents. |
129 |
* Messages for package sys-libs/glibc-2.29-r7 merged to /tmp/stage1root/: |
130 |
* Applying Gentoo Glibc Patchset 2.29-8 |
131 |
* Messages for package dev-libs/libxml2-2.9.9-r3 merged to /tmp/stage1root/: |
132 |
* Skipping XML catalog creation for stage building (bug #208887). |
133 |
* Messages for package sys-devel/gcc-9.2.0-r2 merged to /tmp/stage1root/: |
134 |
* ERROR: sys-devel/gcc-9.2.0-r2::gentoo failed (compile phase): |
135 |
* emake failed |
136 |
* |
137 |
* If you need support, post the output of `emerge --info '=sys-devel/gcc-9.2.0-r2::gentoo'`, |
138 |
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-9.2.0-r2::gentoo'`. |
139 |
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/build.log'. |
140 |
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/temp/environment'. |
141 |
* Working directory: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/build' |
142 |
* S: '/var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-9.2.0' |
143 |
* |
144 |
* Please include /var/tmp/portage/sys-devel/gcc-9.2.0-r2/work/gcc-build-logs.tar.bz2 in your bug report. |
145 |
* |
146 |
|
147 |
|
148 |
|
149 |
|
150 |
|
151 |
|
152 |
|
153 |
|
154 |
|
155 |
|
156 |
|
157 |
|
158 |
|
159 |
|
160 |
|
161 |
|
162 |
|
163 |
|
164 |
|
165 |
|
166 |
|
167 |
|
168 |
08 Jan 2020 07:15:13 EST: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
169 |
08 Jan 2020 07:15:13 EST: ERROR : CatalystError: Stage build aborting due to error. |
170 |
08 Jan 2020 07:15:13 EST: ERROR : Exception running action sequence run_local |
171 |
Traceback (most recent call last): |
172 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local |
173 |
env=self.env) |
174 |
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd |
175 |
print_traceback=False) |
176 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
177 |
|
178 |
During handling of the above exception, another exception occurred: |
179 |
|
180 |
Traceback (most recent call last): |
181 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run |
182 |
getattr(self, x)() |
183 |
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local |
184 |
print_traceback=False) |
185 |
catalyst.support.CatalystError: Stage build aborting due to error. |
186 |
08 Jan 2020 07:15:13 EST: NOTICE : Cleaning up... Running unbind() |
187 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/tmp/kerncache is not a mount point. Skipping |
188 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/cache/binpkgs is not a mount point. Skipping |
189 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/tmp/stage1root/proc is not a mount point. Skipping |
190 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/run is not a mount point. Skipping |
191 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev/shm does not exist. Skipping |
192 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev/pts does not exist. Skipping |
193 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/tmp/portage is not a mount point. Skipping |
194 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/cache/distfiles is not a mount point. Skipping |
195 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/var/db/repos/gentoo is not a mount point. Skipping |
196 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/dev is not a mount point. Skipping |
197 |
08 Jan 2020 07:15:13 EST: NOTICE : /var/tmp/catalyst/tmp/default/stage1-s390-20200108T111854Z/proc is not a mount point. Skipping |
198 |
Command exited with non-zero status 2 |
199 |
3293.67user 1173.58system 54:26.11elapsed 136%CPU (0avgtext+0avgdata 1650944maxresident)k |
200 |
0inputs+0outputs (3354major+461915220minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.20200108T111854Z.iWGaHV/log/stage1.log |