[gentoo-releng-autobuilds] [alpha-qemu-auto] Catalyst non-fatal build error - installcd-stage1.spec

* installed. Please look at /usr/share/doc/emacs-common-1.8/README.gentoo*
 * for future reference)
 * Messages for package sys-apps/util-linux-2.37.2-r3:
 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
 * Messages for package app-editors/emacs-27.2-r5:
 * You can set the version to be started by /usr/bin/emacs through the
 * Emacs eselect module, which also redirects man and info pages.
 * Therefore, several Emacs versions can be installed at the same time.
 * "man emacs.eselect" for details.
 * 
 * If you upgrade from a previous major version of Emacs, then it is
 * strongly recommended that you use app-admin/emacs-updater to rebuild
 * all byte-compiled elisp files of the installed Emacs packages.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/emacs-27.2-r5/README.gentoo*
 * for future reference)
 * Messages for package sys-fs/mdadm-4.1:
 * If you're not relying on kernel auto-detect of your RAID
 * devices, you need to add 'mdraid' to your 'boot' runlevel:
 * 	rc-update add mdraid boot
 * Messages for package app-misc/screen-4.8.0-r3:
 * Some dangerous key bindings have been removed or changed to more safe values.
 * We enable some xterm hacks in our default screenrc, which might break some
 * applications. Please check /etc/screenrc for information on these changes.
 * This revision changes the screen socket location to /tmp/screen
 * Messages for package net-fs/nfs-utils-2.5.4-r3:
 * If you use OpenRC, the nfsmount service has been replaced with nfsclient.
 * If you were using nfsmount, please add nfsclient and netmount to the
 * same runlevel as nfsmount.
 * Messages for package net-misc/dhcpcd-9.4.1:
 * 
 * dhcpcd has zeroconf support active by default.
 * This means it will always obtain an IP address even if no
 * DHCP server can be contacted, which will break any existing
 * failover support you may have configured in your net configuration.
 * This behaviour can be controlled with the noipv4ll configuration
 * file option or the -L command line switch.
 * See the dhcpcd and dhcpcd.conf man pages for more details.
 * 
 * Dhcpcd has duid enabled by default, and this may cause issues
 * with some dhcp servers. For more information, see
 * https://bugs.gentoo.org/show_bug.cgi?id=477356
 * 
 * If you activate the lookup-hostname hook to look up your hostname
 * using the dns, you need to install net-dns/bind-tools.
 * Messages for package app-admin/syslog-ng-3.35.1:
 * It is highly recommended that app-admin/logrotate be emerged to
 * manage the log files.  syslog-ng installs a file in /etc/logrotate.d
 * for logrotate to use.
 * Messages for package app-misc/livecd-tools-2.10:
 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * Messages for package dev-python/ssl-fetch-0.4:
 * This is beta software.
 * The APIs it installs should be considered unstable
 * and are subject to change in these early versions.
 * 
 * Please file any enhancement requests, or bugs
 * at https://github.com/dol-sen/ssl-fetch/issues
 * Messages for package dev-util/cmake-3.22.1:
 * ERROR: dev-util/cmake-3.22.1::gentoo failed (configure phase):
 *   cmake failed
 * 
 * Call stack:
 *     ebuild.sh, line  127:  Called src_configure
 *   environment, line 2367:  Called cmake_src_configure
 *   environment, line 1090:  Called die
 * The specific snippet of code:
 *       "${CMAKE_BINARY}" "${cmakeargs[@]}" "${CMAKE_USE_DIR}" || die "cmake failed";
 * 
 * If you need support, post the output of `emerge --info '=dev-util/cmake-3.22.1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-util/cmake-3.22.1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/dev-util/cmake-3.22.1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-util/cmake-3.22.1/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-util/cmake-3.22.1/work/cmake-3.22.1_build'
 * S: '/var/tmp/portage/dev-util/cmake-3.22.1/work/cmake-3.22.1'
 * Messages for package sys-fs/lvm2-2.03.14-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Make sure the "lvm" init script is in the runlevels:
 * # rc-update add lvm boot
 * 
 * Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want
 * to enable lvm autoactivation and metadata caching.
 * Found the following problematic permissions:
 * 
 *     drwxrwxrwt /run
 * 
 * Expected:
 * 
 *     drwxr-xr-x /run
 * 
 * This is known to be causing problems for UDEV-enabled LVM services.












































30 Dec 2021 20:00:04 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-proxy/dante', 'net-proxy/tsocks', 'sys-apps/busybox', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-block/parted', 'sys-devel/bc', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-kernel/linux-firmwa
 re', 'sys-libs/gpm', 'www-client/links']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-proxy/dante', 'net-proxy/tsocks', 'sys-apps/busybox', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-block/parted', 'sys-devel/bc', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-kernel/linux-firmware', 'sys-libs/gpm', 
 'www-client/links']) exited 1
30 Dec 2021 20:00:04 UTC: ERROR   : CatalystError: livecdbuild aborting due to error.
ERROR:catalyst:CatalystError: livecdbuild aborting due to error.
30 Dec 2021 20:00:04 UTC: ERROR   : Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1611, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 53, in cmd
    raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-proxy/dante', 'net-proxy/tsocks', 'sys-apps/busybox', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-block/parted', 'sys-devel/bc', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-kernel/linux-firmware', 'sys-libs/gpm'
 , 'www-client/links']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1515, in run
    getattr(self, x)()
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1616, in build_packages
    raise CatalystError(
catalyst.support.CatalystError: livecdbuild aborting due to error.
ERROR:catalyst:Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1611, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 53, in cmd
    raise CatalystError('cmd(%r) exited %s' % (args, ret),
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/emacs', 'app-editors/vim', 'app-misc/livecd-tools', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ntp', 'net-misc/rdate', 'net-proxy/dante', 'net-proxy/tsocks', 'sys-apps/busybox', 'sys-apps/ethtool', 'sys-apps/hdparm', 'sys-apps/iproute2', 'sys-apps/sdparm', 'sys-apps/usbutils', 'sys-block/parted', 'sys-devel/bc', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mdadm', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-kernel/linux-firmware', 'sys-libs/gpm'
 , 'www-client/links']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1515, in run
    getattr(self, x)()
  File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1616, in build_packages
    raise CatalystError(
catalyst.support.CatalystError: livecdbuild aborting due to error.
30 Dec 2021 20:00:04 UTC: NOTICE  : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/tmp/kerncache is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/cache/binpkgs is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/run is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/run is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev/shm does not exist. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev/pts does not exist. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/tmp/portage is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/cache/distfiles is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/var/db/repos/gentoo is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/dev is not a mount point. Skipping
30 Dec 2021 20:00:04 UTC: NOTICE  : /var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/proc is not a mount point. Skipping
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/livecd-stage1-alpha-20211230T170535Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
15087.56user 595.97system 40:48.22elapsed 640%CPU (0avgtext+0avgdata 740644maxresident)k
404650inputs+4142544outputs (1358major+121118882minor)pagefaults 0swaps



Full build log at /tmp/catalyst-auto.20211230T170535Z.Roormk/log/installcd-stage1.log