1 |
checking for memrchr... yes |
2 |
checking for mmap... yes |
3 |
checking for nl_langinfo... yes |
4 |
checking for pipe... yes |
5 |
checking for raise... yes |
6 |
checking for rand... yes |
7 |
checking for setenv... yes |
8 |
checking for setlocale... yes |
9 |
checking for setrlimit... yes |
10 |
checking for sigaction... yes |
11 |
checking for sigprocmask... yes |
12 |
checking for stat... yes |
13 |
checking for stpcpy... yes |
14 |
checking for strcasecmp... yes |
15 |
checking for strerror... yes |
16 |
checking for strftime... yes |
17 |
checking for stricmp... no |
18 |
checking for strlwr... no |
19 |
checking for strncasecmp... yes |
20 |
checking for strpbrk... yes |
21 |
checking for strsep... yes |
22 |
checking for strtol... yes |
23 |
checking for strtoul... yes |
24 |
checking for strtoull... yes |
25 |
checking for tcgetattr... yes |
26 |
checking for timegm... yes |
27 |
checking for times... yes |
28 |
checking for ttyname... yes |
29 |
checking for unsetenv... yes |
30 |
checking for wait4... yes |
31 |
checking for waitpid... yes |
32 |
checking for library containing nanosleep... none required |
33 |
checking for inotify_init... yes |
34 |
checking for struct sigaction... yes |
35 |
checking for sigset_t... yes |
36 |
checking for struct ucred.pid... yes |
37 |
checking for struct ucred.cr_pid... no |
38 |
checking for struct sockpeercred.pid... no |
39 |
checking for getpeerucred... no |
40 |
checking zlib.h usability... yes |
41 |
checking zlib.h presence... yes |
42 |
checking for zlib.h... yes |
43 |
checking for deflateInit2_ in -lz... yes |
44 |
checking for bzlib.h... yes |
45 |
checking for BZ2_bzCompressInit in -lbz2... yes |
46 |
checking whether readline via "-lreadline" is present and sane... yes |
47 |
checking for library containing TSS_Create... no |
48 |
checking for library containing Esys_Initialize... no |
49 |
configure: checking for cc features |
50 |
checking if gcc ignores unknown -Wno-* options... yes |
51 |
checking if gcc supports -Wpointer-arith... yes |
52 |
checking whether to enable log_clock... no |
53 |
checking whether "make check" shall run all tests... yes |
54 |
checking whether tests should be run... yes |
55 |
configure: |
56 |
*** |
57 |
*** The system does not provide a working iconv function. Please |
58 |
*** install a suitable library; for example GNU Libiconv which is |
59 |
*** available at: |
60 |
*** https://ftp.gnu.org/gnu/libiconv/ |
61 |
*** |
62 |
configure: error: |
63 |
*** |
64 |
*** Required libraries not found. Please consult the above messages |
65 |
*** and install them before running configure again. |
66 |
*** |
67 |
|
68 |
!!! Please attach the following file when seeking support: |
69 |
!!! /var/tmp/portage/app-crypt/gnupg-2.3.3-r1/work/gnupg-2.3.3/config.log |
70 |
* ERROR: app-crypt/gnupg-2.3.3-r1::gentoo failed (configure phase): |
71 |
* econf failed |
72 |
* |
73 |
* Call stack: |
74 |
* ebuild.sh, line 127: Called src_configure |
75 |
* environment, line 1722: Called econf '--enable-bzip2' '--enable-nls' '--enable-scdaemon' '--enable-gnutls' '--enable-tofu' '--enable-keyboxd' '--enable-sqlite' '--disable-ccid-driver' '--disable-wks-tools' '--without-ldap' '--with-readline' '--with-mailprog=/usr/libexec/sendmail' '--disable-ntbtls' '--enable-all-tests' '--enable-gpgsm' '--enable-large-secmem' 'CC_FOR_BUILD=m68k-unknown-linux-gnu-gcc' 'GPG_ERROR_CONFIG=/usr/bin/m68k-unknown-linux-gnu-gpg-error-config' 'KSBA_CONFIG=/usr/bin/ksba-config' 'LIBASSUAN_CONFIG=/usr/bin/libassuan-config' 'LIBGCRYPT_CONFIG=/usr/bin/m68k-unknown-linux-gnu-libgcrypt-config' 'NPTH_CONFIG=/usr/bin/npth-config' '--without-libiconv-prefix' '--without-libintl-prefix' |
76 |
* phase-helpers.sh, line 711: Called __helpers_die 'econf failed' |
77 |
* isolated-functions.sh, line 112: Called die |
78 |
* The specific snippet of code: |
79 |
* die "$@" |
80 |
* |
81 |
* If you need support, post the output of `emerge --info '=app-crypt/gnupg-2.3.3-r1::gentoo'`, |
82 |
* the complete build log and the output of `emerge -pqv '=app-crypt/gnupg-2.3.3-r1::gentoo'`. |
83 |
* The complete build log is located at '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/temp/build.log'. |
84 |
* The ebuild environment file is located at '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/temp/environment'. |
85 |
* Working directory: '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/work/gnupg-2.3.3' |
86 |
* S: '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/work/gnupg-2.3.3' |
87 |
(sandbox) error: in /var/tmp/portage/sys-apps/sandbox-2.29/work/sandbox-2.29/libsbutil/src/file.c, function rc_ls_dir(), line 122: |
88 |
(sandbox) strerror() = 'Value too large for defined data type' |
89 |
(sandbox) Failed to readdir() '/etc/sandbox.d'! |
90 |
(sandbox) error: in /var/tmp/portage/sys-apps/sandbox-2.29/work/sandbox-2.29/libsbutil/src/file.c, function rc_ls_dir(), line 122: |
91 |
(sandbox) strerror() = 'Value too large for defined data type' |
92 |
(sandbox) Failed to readdir() '/etc/sandbox.d'! |
93 |
(sandbox) error: in /var/tmp/portage/sys-apps/sandbox-2.29/work/sandbox-2.29/libsbutil/src/file.c, function rc_ls_dir(), line 122: |
94 |
(sandbox) strerror() = 'Value too large for defined data type' |
95 |
(sandbox) Failed to readdir() '/etc/sandbox.d'! |
96 |
(sandbox) error: in /var/tmp/portage/sys-apps/sandbox-2.29/work/sandbox-2.29/libsbutil/src/file.c, function rc_ls_dir(), line 122: |
97 |
(sandbox) strerror() = 'Value too large for defined data type' |
98 |
(sandbox) Failed to readdir() '/etc/sandbox.d'! |
99 |
* Messages for package sys-apps/portage-3.0.28-r1: |
100 |
* Unable to find kernel sources at /usr/src/linux |
101 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
102 |
* Messages for package sys-libs/glibc-2.34-r3: |
103 |
* Generating all locales; edit /etc/locale.gen to save time/space |
104 |
* Messages for package acct-group/sgx-0: |
105 |
* Adding group 'sgx' to your system ... |
106 |
* - Groupid: 405 |
107 |
* Messages for package sys-apps/sysvinit-3.00-r1: |
108 |
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to |
109 |
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps. |
110 |
* Messages for package app-crypt/gnupg-2.3.3-r1: |
111 |
* ERROR: app-crypt/gnupg-2.3.3-r1::gentoo failed (configure phase): |
112 |
* econf failed |
113 |
* |
114 |
* Call stack: |
115 |
* ebuild.sh, line 127: Called src_configure |
116 |
* environment, line 1722: Called econf '--enable-bzip2' '--enable-nls' '--enable-scdaemon' '--enable-gnutls' '--enable-tofu' '--enable-keyboxd' '--enable-sqlite' '--disable-ccid-driver' '--disable-wks-tools' '--without-ldap' '--with-readline' '--with-mailprog=/usr/libexec/sendmail' '--disable-ntbtls' '--enable-all-tests' '--enable-gpgsm' '--enable-large-secmem' 'CC_FOR_BUILD=m68k-unknown-linux-gnu-gcc' 'GPG_ERROR_CONFIG=/usr/bin/m68k-unknown-linux-gnu-gpg-error-config' 'KSBA_CONFIG=/usr/bin/ksba-config' 'LIBASSUAN_CONFIG=/usr/bin/libassuan-config' 'LIBGCRYPT_CONFIG=/usr/bin/m68k-unknown-linux-gnu-libgcrypt-config' 'NPTH_CONFIG=/usr/bin/npth-config' '--without-libiconv-prefix' '--without-libintl-prefix' |
117 |
* phase-helpers.sh, line 711: Called __helpers_die 'econf failed' |
118 |
* isolated-functions.sh, line 112: Called die |
119 |
* The specific snippet of code: |
120 |
* die "$@" |
121 |
* |
122 |
* If you need support, post the output of `emerge --info '=app-crypt/gnupg-2.3.3-r1::gentoo'`, |
123 |
* the complete build log and the output of `emerge -pqv '=app-crypt/gnupg-2.3.3-r1::gentoo'`. |
124 |
* The complete build log is located at '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/temp/build.log'. |
125 |
* The ebuild environment file is located at '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/temp/environment'. |
126 |
* Working directory: '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/work/gnupg-2.3.3' |
127 |
* S: '/var/tmp/portage/app-crypt/gnupg-2.3.3-r1/work/gnupg-2.3.3' |
128 |
|
129 |
|
130 |
|
131 |
|
132 |
|
133 |
|
134 |
|
135 |
|
136 |
|
137 |
|
138 |
08 Dec 2021 23:51:02 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
139 |
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
140 |
08 Dec 2021 23:51:02 UTC: ERROR : CatalystError: Stage build aborting due to error. |
141 |
ERROR:catalyst:CatalystError: Stage build aborting due to error. |
142 |
08 Dec 2021 23:51:02 UTC: ERROR : Exception running action sequence run_local |
143 |
Traceback (most recent call last): |
144 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1409, in run_local |
145 |
cmd([self.settings['controller_file'], 'run'], |
146 |
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 53, in cmd |
147 |
raise CatalystError('cmd(%r) exited %s' % (args, ret), |
148 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
149 |
|
150 |
During handling of the above exception, another exception occurred: |
151 |
|
152 |
Traceback (most recent call last): |
153 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1515, in run |
154 |
getattr(self, x)() |
155 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1418, in run_local |
156 |
raise CatalystError("Stage build aborting due to error.", |
157 |
catalyst.support.CatalystError: Stage build aborting due to error. |
158 |
ERROR:catalyst:Exception running action sequence run_local |
159 |
Traceback (most recent call last): |
160 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1409, in run_local |
161 |
cmd([self.settings['controller_file'], 'run'], |
162 |
File "/usr/lib/python3.9/site-packages/catalyst/support.py", line 53, in cmd |
163 |
raise CatalystError('cmd(%r) exited %s' % (args, ret), |
164 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
165 |
|
166 |
During handling of the above exception, another exception occurred: |
167 |
|
168 |
Traceback (most recent call last): |
169 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1515, in run |
170 |
getattr(self, x)() |
171 |
File "/usr/lib/python3.9/site-packages/catalyst/base/stagebase.py", line 1418, in run_local |
172 |
raise CatalystError("Stage build aborting due to error.", |
173 |
catalyst.support.CatalystError: Stage build aborting due to error. |
174 |
08 Dec 2021 23:51:02 UTC: NOTICE : Cleaning up... Running unbind() |
175 |
NOTICE:catalyst:Cleaning up... Running unbind() |
176 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/tmp/kerncache is not a mount point. Skipping |
177 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/tmp/kerncache is not a mount point. Skipping |
178 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/cache/binpkgs is not a mount point. Skipping |
179 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/cache/binpkgs is not a mount point. Skipping |
180 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/tmp/stage1root/proc is not a mount point. Skipping |
181 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/tmp/stage1root/proc is not a mount point. Skipping |
182 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/run is not a mount point. Skipping |
183 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/run is not a mount point. Skipping |
184 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev/shm does not exist. Skipping |
185 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev/shm does not exist. Skipping |
186 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev/pts does not exist. Skipping |
187 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev/pts does not exist. Skipping |
188 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/tmp/portage is not a mount point. Skipping |
189 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/tmp/portage is not a mount point. Skipping |
190 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/cache/distfiles is not a mount point. Skipping |
191 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/cache/distfiles is not a mount point. Skipping |
192 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/db/repos/gentoo is not a mount point. Skipping |
193 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/var/db/repos/gentoo is not a mount point. Skipping |
194 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev is not a mount point. Skipping |
195 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/dev is not a mount point. Skipping |
196 |
08 Dec 2021 23:51:02 UTC: NOTICE : /var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/proc is not a mount point. Skipping |
197 |
NOTICE:catalyst:/var/tmp/catalyst/tmp/default/stage1-m68k-openrc-20211208T170530Z/proc is not a mount point. Skipping |
198 |
Command exited with non-zero status 2 |
199 |
116235.17user 2113.43system 6:45:24elapsed 486%CPU (0avgtext+0avgdata 692412maxresident)k |
200 |
8426inputs+6360992outputs (4959major+756586319minor)pagefaults 0swaps |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.20211208T170530Z.7Kfmbo/log/stage1-openrc.log |