| 1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f installcd-stage2-minimal.spec |
| 2 |
09 Jul 2018 05:27:43 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
| 3 |
09 Jul 2018 05:27:43 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'clear-autoresume', 'bindist', 'pkgcache'} |
| 4 |
09 Jul 2018 05:27:43 UTC: NOTICE : Processing spec file: installcd-stage2-minimal.spec |
| 5 |
09 Jul 2018 05:27:43 UTC: NOTICE : Using target: livecd-stage2 |
| 6 |
09 Jul 2018 05:27:43 UTC: NOTICE : Source file specification matching setting is: loose |
| 7 |
09 Jul 2018 05:27:43 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar'] |
| 8 |
09 Jul 2018 05:27:44 UTC: NOTICE : Source path set to /home/release/buildroot/amd64-dev/builds/default/livecd-stage1-amd64-20180709T030004Z.tar.xz |
| 9 |
09 Jul 2018 05:27:44 UTC: NOTICE : --- Running action sequence: unpack |
| 10 |
09 Jul 2018 05:27:44 UTC: NOTICE : Clearing the chroot path ... |
| 11 |
09 Jul 2018 05:27:44 UTC: NOTICE : Emptying directory: /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z |
| 12 |
09 Jul 2018 05:27:44 UTC: NOTICE : Starting auto from /home/release/buildroot/amd64-dev/builds/default/livecd-stage1-amd64-20180709T030004Z.tar.xz |
| 13 |
09 Jul 2018 05:27:44 UTC: NOTICE : to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z (this may take some time) .. |
| 14 |
09 Jul 2018 05:27:48 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
| 15 |
09 Jul 2018 05:27:48 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
| 16 |
09 Jul 2018 05:28:00 UTC: NOTICE : --- Running action sequence: config_profile_link |
| 17 |
09 Jul 2018 05:28:00 UTC: NOTICE : --- Running action sequence: setup_confdir |
| 18 |
09 Jul 2018 05:28:00 UTC: NOTICE : --- Running action sequence: portage_overlay |
| 19 |
09 Jul 2018 05:28:00 UTC: NOTICE : --- Running action sequence: bind |
| 20 |
09 Jul 2018 05:28:01 UTC: NOTICE : --- Running action sequence: chroot_setup |
| 21 |
09 Jul 2018 05:28:01 UTC: NOTICE : Setting up chroot... |
| 22 |
09 Jul 2018 05:28:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
| 23 |
09 Jul 2018 05:28:01 UTC: WARNING : If your build fails look here first as the possible problem. |
| 24 |
09 Jul 2018 05:28:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
| 25 |
09 Jul 2018 05:28:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
| 26 |
09 Jul 2018 05:28:01 UTC: WARNING : You have been warned. |
| 27 |
09 Jul 2018 05:28:02 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/etc/portage/make.conf |
| 28 |
09 Jul 2018 05:28:02 UTC: NOTICE : STICKY-CONFIG is enabled |
| 29 |
09 Jul 2018 05:28:02 UTC: NOTICE : --- Running action sequence: setup_environment |
| 30 |
09 Jul 2018 05:28:02 UTC: NOTICE : --- Running action sequence: run_local |
| 31 |
09 Jul 2018 05:28:02 UTC: NOTICE : --- Running action sequence: build_kernel |
| 32 |
Copying pre-kmerge.sh to /tmp |
| 33 |
copying pre-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp |
| 34 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp |
| 35 |
Ensure the file has the executable bit set |
| 36 |
Running pre-kmerge.sh in chroot: |
| 37 |
chroot /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z /tmp/pre-kmerge.sh |
| 38 |
>>> Regenerating /etc/ld.so.cache... |
| 39 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot genkernel |
| 40 |
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3 |
| 41 |
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo |
| 42 |
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo |
| 43 |
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo |
| 44 |
>>> Installing (2 of 3) sys-kernel/linux-firmware-20180103-r1::gentoo |
| 45 |
>>> Emerging binary (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo |
| 46 |
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo |
| 47 |
* Messages for package sys-kernel/linux-firmware-20180103-r1: |
| 48 |
* If you are only interested in particular firmware files, edit the saved |
| 49 |
* configfile and remove those that you do not want. |
| 50 |
* Messages for package sys-kernel/genkernel-3.5.3.3: |
| 51 |
* Documentation is available in the genkernel manual page |
| 52 |
* as well as the following URL: |
| 53 |
* https://wiki.gentoo.org/wiki/Genkernel |
| 54 |
* This package is known to not work with reiser4. If you are running |
| 55 |
* reiser4 and have a problem, do not file a bug. We know it does not |
| 56 |
* work and we don't plan on fixing it since reiser4 is the one that is |
| 57 |
* broken in this regard. Try using a sane filesystem like ext4. |
| 58 |
* The LUKS support has changed from versions prior to 3.4.4. Now, |
| 59 |
* you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah. |
| 60 |
|
| 61 |
|
| 62 |
|
| 63 |
|
| 64 |
removing /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp/pre-kmerge.sh from the chroot |
| 65 |
removing /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp/chroot-functions.sh from the chroot |
| 66 |
Copying kmerge.sh to /tmp |
| 67 |
copying kmerge.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp |
| 68 |
copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z/tmp |
| 69 |
Ensure the file has the executable bit set |
| 70 |
Running kmerge.sh in chroot: |
| 71 |
chroot /home/release/buildroot/amd64-dev/tmp/default/livecd-stage2-amd64-20180709T030004Z /tmp/kmerge.sh |
| 72 |
>>> Regenerating /etc/ld.so.cache... |
| 73 |
Genkernel version 3.5.3.3 found ... OK |
| 74 |
emerge --quiet --usepkg --buildpkg --newuse gentoo-sources |
| 75 |
>>> Emerging binary (1 of 2) sys-devel/bc-1.06.95-r2::gentoo |
| 76 |
>>> Installing (1 of 2) sys-devel/bc-1.06.95-r2::gentoo |
| 77 |
>>> Emerging binary (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo |
| 78 |
>>> Installing (2 of 2) sys-kernel/gentoo-sources-4.14.52::gentoo |
| 79 |
>>> Recording sys-kernel/gentoo-sources in "world" favorites file... |
| 80 |
* Messages for package sys-kernel/gentoo-sources-4.14.52: |
| 81 |
* If you are upgrading from a previous kernel, you may be interested |
| 82 |
* in the following document: |
| 83 |
* - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade |
| 84 |
|
| 85 |
|
| 86 |
Adjusting /usr/src/linux to point to /usr/src/linux-4.14.52-gentoo |
| 87 |
[32;01m*[32;01m Gentoo Linux Genkernel; Version 3.5.3.3[0m |
| 88 |
[32;01m*[0m Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils sys-apps/pcmciautils sys-kernel/linux-firmware --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20180709T030004Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20180709T030004Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20180709T030004Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config |
| 89 |
|
| 90 |
[32;01m*[0m Using genkernel.conf from /etc/genkernel.conf |
| 91 |
[32;01m*[0m Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh .. |
| 92 |
[32;01m*[0m Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load .. |
| 93 |
[32;01m*[0;01m Linux Kernel [0;01m4.14.52-gentoo[0m for [0;01mx86_64[0m... |
| 94 |
[32;01m*[0m .. with config file /var/tmp/gentoo.config |
| 95 |
[32;01m*[0m kernel: Using config from /var/tmp/gentoo.config |
| 96 |
[32;01m*[0m kernel: >> Running mrproper... |
| 97 |
[32;01m*[0m >> Running oldconfig... |
| 98 |
[32;01m*[0m kernel: >> Cleaning... |
| 99 |
[32;01m*[0m >> Compiling 4.14.52-gentoo bzImage... |
| 100 |
[32;01m*[0m >> Not installing firmware as requested by configuration FIRMWARE_INSTALL=no... |
| 101 |
[32;01m*[0m >> Compiling 4.14.52-gentoo modules... |
| 102 |
16 Jul 2018 22:32:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
| 103 |
16 Jul 2018 22:32:12 UTC: ERROR : CatalystError: build aborting due to kernel build error. |
| 104 |
Traceback (most recent call last): |
| 105 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel |
| 106 |
self._build_kernel(kname = kname) |
| 107 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel |
| 108 |
env=self.env) |
| 109 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
| 110 |
print_traceback=False) |
| 111 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
| 112 |
16 Jul 2018 22:32:12 UTC: ERROR : Exception running action sequence build_kernel |
| 113 |
Traceback (most recent call last): |
| 114 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1575, in build_kernel |
| 115 |
self._build_kernel(kname = kname) |
| 116 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1612, in _build_kernel |
| 117 |
env=self.env) |
| 118 |
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd |
| 119 |
print_traceback=False) |
| 120 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage2/livecd-stage2-controller.sh', 'kernel', 'gentoo']) exited -15 |
| 121 |
|
| 122 |
During handling of the above exception, another exception occurred: |
| 123 |
|
| 124 |
Traceback (most recent call last): |
| 125 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1455, in run |
| 126 |
getattr(self, x)() |
| 127 |
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1581, in build_kernel |
| 128 |
print_traceback=True) |
| 129 |
catalyst.support.CatalystError: build aborting due to kernel build error. |
| 130 |
16 Jul 2018 22:32:12 UTC: NOTICE : Cleaning up... Running unbind() |
| 131 |
Command exited with non-zero status 2 |
| 132 |
49.93user 5.94system 185:04:28elapsed 0%CPU (0avgtext+0avgdata 361928maxresident)k |
| 133 |
0inputs+4498168outputs (0major+873036minor)pagefaults 0swaps |
| 134 |
|
| 135 |
|
| 136 |
|
| 137 |
Full build log at /home/release/tmp/run/catalyst-auto.20180709T030004Z.QwkTBg/log/installcd-stage2-minimal.log |
Archives