1 |
these variables. |
2 |
Catalyst Maintainers use VERY minimal envscripts if used at all |
3 |
You have been warned |
4 |
|
5 |
--- Running action sequence: setup_environment |
6 |
--- Running action sequence: run_local |
7 |
copying make.conf to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20141017///tmp/stage1root/etc/portage |
8 |
Copying stage1-chroot.sh to /tmp |
9 |
copying stage1-chroot.sh to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20141017//tmp |
10 |
copying chroot-functions.sh to /usr/local/catalyst/tmp/default/stage1-hppa1.1-20141017//tmp |
11 |
Ensure the file has the executable bit set |
12 |
Running stage1-chroot.sh in chroot /usr/local/catalyst/tmp/default/stage1-hppa1.1-20141017/ |
13 |
>>> Regenerating /etc/ld.so.cache... |
14 |
emerge --quiet --oneshot --nodeps --update sys-apps/portage |
15 |
|
16 |
Performing Global Updates |
17 |
(Could take a couple of minutes if you have a lot of binary packages.) |
18 |
|
19 |
|
20 |
>>> Verifying ebuild manifests |
21 |
>>> Emerging (1 of 1) sys-apps/portage-2.2.8-r2 |
22 |
>>> Installing (1 of 1) sys-apps/portage-2.2.8-r2 |
23 |
Updating seed stage... |
24 |
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc |
25 |
|
26 |
!!! The following installed packages are masked: |
27 |
- virtual/perl-ExtUtils-Install-1.580.0-r1::gentoo (masked by: package.mask) |
28 |
/usr/portage/profiles/package.mask: |
29 |
# Andreas K. Huettel <dilfridge@g.o> (9 Oct 2014) |
30 |
# Masked for removal in 30 days; see e.g. bug 446376 |
31 |
# Please upgrade to stable Perl 5.18 |
32 |
|
33 |
- dev-lang/perl-5.16.3::gentoo (masked by: package.mask) |
34 |
- virtual/perl-File-Temp-0.220.0-r3::gentoo (masked by: package.mask) |
35 |
For more information, see the MASKED PACKAGES section in the emerge |
36 |
man page or refer to the Gentoo Handbook. |
37 |
|
38 |
>>> Recording sys-devel/gcc:4.7 in "world" favorites file... |
39 |
>>> Verifying ebuild manifests |
40 |
>>> Running pre-merge checks for sys-devel/gcc-4.8.3 |
41 |
>>> Emerging (1 of 3) sys-libs/timezone-data-2014g |
42 |
>>> Installing (1 of 3) sys-libs/timezone-data-2014g |
43 |
>>> Emerging (2 of 3) sys-libs/glibc-2.19-r1 |
44 |
>>> Installing (2 of 3) sys-libs/glibc-2.19-r1 |
45 |
>>> Emerging (3 of 3) sys-devel/gcc-4.8.3 |
46 |
>>> Installing (3 of 3) sys-devel/gcc-4.8.3 |
47 |
>>> Recording sys-devel/gcc in "world" favorites file... |
48 |
* Messages for package sys-libs/timezone-data-2014g: |
49 |
* You do not have TIMEZONE set in /etc/timezone. |
50 |
* Skipping auto-update of /etc/localtime. |
51 |
* Messages for package sys-libs/glibc-2.19-r1: |
52 |
* Defaulting /etc/host.conf:multi to on |
53 |
* Generating all locales; edit /etc/locale.gen to save time/space |
54 |
* Messages for package sys-devel/gcc-4.8.3: |
55 |
* If you have issues with packages unable to locate libstdc++.la, |
56 |
* then try running 'fix_libtool_files.sh' on the old gcc versions. |
57 |
* You might want to review the GCC upgrade guide when moving between |
58 |
* major versions (like 4.2 to 4.3): |
59 |
* http://www.gentoo.org/doc/en/gcc-upgrading.xml |
60 |
|
61 |
|
62 |
|
63 |
|
64 |
|
65 |
|
66 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
67 |
>>> Verifying ebuild manifests |
68 |
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/ |
69 |
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/ |
70 |
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/: |
71 |
* Initializing /tmp/stage1root/lib as a dir |
72 |
* Initializing /tmp/stage1root/usr/lib as a dir |
73 |
* Initializing /tmp/stage1root/usr/local/lib as a dir |
74 |
* Your system profile has SYMLINK_LIB=no, so that means you need to |
75 |
* have these paths configured as follows: |
76 |
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib |
77 |
* The ebuild will attempt to fix these, but only for trivial conversions. |
78 |
* If things fail, you will need to manually create/move the directories. |
79 |
* Converting /tmp/stage1root/lib from a symlink to a dir |
80 |
* Converting /tmp/stage1root/usr/lib from a symlink to a dir |
81 |
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir |
82 |
|
83 |
|
84 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig sys-devel/patch virtual/editor sys-apps/makedev sys-apps/less sys-devel/autoconf sys-apps/coreutils sys-devel/flex sys-devel/make sys-apps/net-tools sys-devel/gnuconfig sys-apps/gawk app-arch/gzip sys-apps/file sys-devel/gettext app-arch/tar net-misc/wget sys-devel/binutils app-arch/xz-utils virtual/libc virtual/shadow sys-apps/baselayout virtual/package-manager sys-apps/sed sys-apps/findutils virtual/os-headers sys-apps/which app-shells/bash sys-apps/grep sys-devel/bison net-misc/rsync sys-devel/gcc sys-devel/automake sys-devel/libtool sys-apps/diffutils app-arch/bzip2 |
85 |
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/ |
86 |
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/ |
87 |
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/ |
88 |
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/ |
89 |
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/ |
90 |
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/ |
91 |
[ebuild N ] app-arch/xz-utils-5.0.5-r1 to /tmp/stage1root/ |
92 |
[ebuild N ] sys-apps/file-5.19 to /tmp/stage1root/ |
93 |
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/ |
94 |
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/ |
95 |
[ebuild N ] sys-libs/timezone-data-2014g to /tmp/stage1root/ |
96 |
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/ |
97 |
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/ |
98 |
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/ |
99 |
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/ |
100 |
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/ |
101 |
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/ |
102 |
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/ |
103 |
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/ |
104 |
[ebuild N ] app-arch/gzip-1.5 to /tmp/stage1root/ |
105 |
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/ |
106 |
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/ |
107 |
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/ |
108 |
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/ |
109 |
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/ |
110 |
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/ |
111 |
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/ |
112 |
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/ |
113 |
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/ |
114 |
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/ |
115 |
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/ |
116 |
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/ |
117 |
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/ |
118 |
[ebuild N ] app-misc/pax-utils-0.7 to /tmp/stage1root/ |
119 |
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/ |
120 |
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/ |
121 |
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/ |
122 |
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/ |
123 |
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/ |
124 |
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/ |
125 |
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/ |
126 |
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/ |
127 |
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/ |
128 |
[ebuild N ] sys-devel/binutils-2.23.2 to /tmp/stage1root/ |
129 |
[ebuild N ] app-admin/eselect-1.4.1 to /tmp/stage1root/ |
130 |
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/ |
131 |
[ebuild U ] dev-lang/perl-5.18.2-r2 [5.16.3] |
132 |
[ebuild N ] sys-kernel/linux-headers-3.13 to /tmp/stage1root/ |
133 |
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/ |
134 |
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/ |
135 |
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/ |
136 |
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/ |
137 |
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/ |
138 |
[ebuild N ] dev-libs/libxml2-2.9.1-r4 to /tmp/stage1root/ |
139 |
[ebuild N ] dev-lang/python-2.7.7 to /tmp/stage1root/ |
140 |
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/ |
141 |
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/ |
142 |
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/ |
143 |
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/ |
144 |
[ebuild N ] app-admin/perl-cleaner-2.16 to /tmp/stage1root/ |
145 |
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/ |
146 |
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/ |
147 |
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/ |
148 |
[ebuild N ] perl-core/File-Temp-0.230.0 |
149 |
[ebuild U ] virtual/perl-File-Temp-0.230.0-r1 [0.220.0-r3] |
150 |
[blocks b ] >perl-core/File-Temp-0.220.0-r999 (">perl-core/File-Temp-0.220.0-r999" is blocking virtual/perl-File-Temp-0.220.0-r3) |
151 |
[ebuild N ] virtual/editor-0 to /tmp/stage1root/ |
152 |
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/ |
153 |
[ebuild N ] net-misc/wget-1.14 to /tmp/stage1root/ |
154 |
[ebuild N ] virtual/libc-0 to /tmp/stage1root/ |
155 |
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ |
156 |
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/ |
157 |
[ebuild N ] sys-apps/grep-2.16 to /tmp/stage1root/ |
158 |
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/ |
159 |
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/ |
160 |
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/ |
161 |
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/ |
162 |
[ebuild N ] sys-devel/libtool-2.4.2-r1 to /tmp/stage1root/ |
163 |
|
164 |
!!! Multiple package instances within a single package slot have been pulled |
165 |
!!! into the dependency graph, resulting in a slot conflict: |
166 |
|
167 |
dev-lang/perl:0 |
168 |
|
169 |
(dev-lang/perl-5.16.3::gentoo, installed) pulled in by |
170 |
dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Locale-gettext-1.50.0-r1::gentoo, installed) |
171 |
|
172 |
(dev-lang/perl-5.18.2-r2::gentoo, ebuild scheduled for merge) pulled in by |
173 |
(no parents that aren't satisfied by other packages in this slot) |
174 |
|
175 |
|
176 |
|
177 |
!!! catalyst: run script failed. |
178 |
|
179 |
|
180 |
Traceback (most recent call last): |
181 |
File "modules/generic_stage_target.py", line 1244, in run_local |
182 |
"run script failed.",env=self.env) |
183 |
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd |
184 |
raise CatalystError,myexc |
185 |
CatalystError |
186 |
None |
187 |
|
188 |
!!! catalyst: Stage build aborting due to error. |
189 |
|
190 |
Traceback (most recent call last): |
191 |
File "/usr/lib/catalyst/catalyst", line 218, in build_target |
192 |
mytarget.run() |
193 |
File "modules/generic_stage_target.py", line 1304, in run |
194 |
apply(getattr(self,x)) |
195 |
File "modules/generic_stage_target.py", line 1249, in run_local |
196 |
raise CatalystError,"Stage build aborting due to error." |
197 |
CatalystError |
198 |
!!! catalyst: Error encountered during run of target stage1 |
199 |
Catalyst aborting.... |
200 |
lockfile does not exist '/usr/local/catalyst/tmp/default/stage1-hppa1.1-20141017/.catalyst_lock' |
201 |
|
202 |
|
203 |
|
204 |
Full build log at /tmp/catalyst-auto.23296/log/hppa1.1_stage1.log |