Gentoo Archives: gentoo-releng-autobuilds

From: catalyst@×××××××××××××××××××.name
To: jmbsvicetto@×××××.com, gentoo-releng-autobuilds@l.g.o
Subject: [gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage2.spec
Date: Tue, 22 Dec 2015 02:24:18
Message-Id: 20151222022411.8B9BDE006E@lantean.jmbsvicetto.name
1 *
2 * Detected file collision(s):
3 *
4 * /lib/firmware/atmsar11.fw
5 * /lib/firmware/tigon/tg3_tso.bin
6 * /lib/firmware/tigon/tg3_tso5.bin
7 * /lib/firmware/tigon/tg3.bin
8 * /lib/firmware/yamaha/ds1_ctrl.fw
9 * /lib/firmware/yamaha/ds1e_ctrl.fw
10 * /lib/firmware/yamaha/ds1_dsp.fw
11 * /lib/firmware/tehuti/bdx.bin
12 * /lib/firmware/ositech/Xilinx7OD.bin
13 * /lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw
14 * /lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw
15 * /lib/firmware/bnx2/bnx2-mips-09-6.2.1a.fw
16 * /lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw
17 * /lib/firmware/bnx2/bnx2-mips-09-6.2.1b.fw
18 * /lib/firmware/bnx2/bnx2-mips-06-6.2.1.fw
19 * /lib/firmware/bnx2/bnx2-mips-06-6.2.3.fw
20 * /lib/firmware/3com/typhoon.bin
21 * /lib/firmware/adaptec/starfire_tx.bin
22 * /lib/firmware/adaptec/starfire_rx.bin
23 * /lib/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw
24 * /lib/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw
25 * /lib/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw
26 * /lib/firmware/acenic/tg2.bin
27 * /lib/firmware/acenic/tg1.bin
28 * /lib/firmware/cxgb3/t3b_psram-1.1.0.bin
29 * /lib/firmware/cxgb3/ael2005_opt_edc.bin
30 * /lib/firmware/cxgb3/ael2020_twx_edc.bin
31 * /lib/firmware/cxgb3/ael2005_twx_edc.bin
32 * /lib/firmware/cxgb3/t3c_psram-1.1.0.bin
33 * /lib/firmware/e100/d101m_ucode.bin
34 * /lib/firmware/e100/d102e_ucode.bin
35 * /lib/firmware/e100/d101s_ucode.bin
36 * /lib/firmware/sun/cassini.bin
37 * /lib/firmware/ess/maestro3_assp_kernel.fw
38 * /lib/firmware/ess/maestro3_assp_minisrc.fw
39 * /lib/firmware/kaweth/new_code_fix.bin
40 * /lib/firmware/kaweth/trigger_code.bin
41 * /lib/firmware/kaweth/trigger_code_fix.bin
42 * /lib/firmware/kaweth/new_code.bin
43 * /lib/firmware/cis/tamarack.cis
44 * /lib/firmware/cis/PE-200.cis
45 * /lib/firmware/cis/PE520.cis
46 * /lib/firmware/cis/PCMLM28.cis
47 * /lib/firmware/cis/SW_7xx_SER.cis
48 * /lib/firmware/cis/SW_8xx_SER.cis
49 * /lib/firmware/cis/LA-PCM.cis
50 * /lib/firmware/cis/MT5634ZLX.cis
51 * /lib/firmware/cis/COMpad4.cis
52 * /lib/firmware/cis/3CCFEM556.cis
53 * /lib/firmware/cis/RS-COM-2P.cis
54 * /lib/firmware/cis/DP83903.cis
55 * /lib/firmware/cis/SW_555_SER.cis
56 * /lib/firmware/cis/COMpad2.cis
57 * /lib/firmware/cis/3CXEM556.cis
58 * /lib/firmware/cis/NE2K.cis
59 * /lib/firmware/advansys/mcode.bin
60 * /lib/firmware/advansys/3550.bin
61 * /lib/firmware/advansys/38C1600.bin
62 * /lib/firmware/advansys/38C0800.bin
63 * /lib/firmware/qlogic/1280.bin
64 * /lib/firmware/qlogic/12160.bin
65 * /lib/firmware/qlogic/1040.bin
66 * /lib/firmware/korg/k1212.dsp
67 *
68 * Searching all installed packages for file collisions...
69 *
70 * Press Ctrl-C to Stop
71 *
72 * None of the installed packages claim the file(s).
73 *
74 * Package 'sys-kernel/linux-firmware-20150812' merged despite file
75 * collisions. If necessary, refer to your elog messages for the whole
76 * content of the above message.
77 * If you are only interested in particular firmware files, edit the saved
78 * configfile and remove those that you do not want.
79 * Messages for package media-sound/alsa-utils-1.0.29:
80 *
81 * To take advantage of the init script, and automate the process of
82 * saving and restoring sound-card mixer levels you should
83 * add alsasound to the boot runlevel. You can do this as
84 * root like so:
85 * # rc-update add alsasound boot
86 *
87 * The ALSA core should be built into the kernel or loaded through other
88 * means. There is no longer any modular auto(un)loading in alsa-utils.
89 * Messages for package app-accessibility/espeakup-0.71:
90 * To get espeakup to start automatically, it is currently recommended
91 * that you add it to the default run level, by giving the following
92 * command as root.
93 *
94 * rc-update add espeakup default
95 *
96 * You can also set a default voice now for espeakup.
97 * See /etc/conf.d/espeakup for how to do this.
98
99
100
101
102
103
104
105
106
107 * <<< Callback exit status: 0
108
109 * busybox: >> Applying patches...
110 * - 1.18.1-openvt.diff
111 * - busybox-1.20.1-mdstart.patch
112 * - busybox-1.20.2-bunzip2.patch
113 * - busybox-1.20.2-glibc-sys-resource.patch
114 * - busybox-1.20.2-modprobe.patch
115 * - busybox-1.7.4-signal-hack.patch
116 * busybox: >> Configuring...
117 * busybox: >> Compiling...
118 * busybox: >> Copying to cache...
119 * initramfs: >> Initializing...
120 * >> Appending base_layout cpio data...
121 * >> Appending auxilary cpio data...
122 * >> Copying keymaps
123 * >> Appending busybox cpio data...
124 * >> Appending lvm cpio data...
125 * LVM: Adding support (compiling binaries)...
126 * lvm: >> Applying patches...
127 * - lvm2-2.02.72-no-export-dynamic.patch
128 * lvm: >> Configuring...
129 * lvm: >> Compiling...
130 * >> Copying to bincache...
131 * >> Appending dmraid cpio data...
132 * DMRAID: Adding support (compiling binaries)...
133 * lvm: >> Using cache
134 * dmraid: >> Configuring...
135 * dmraid: >> Compiling...
136 * >> Copying to bincache...
137 * >> Appending mdadm cpio data...
138 * MDADM: Skipping inclusion of mdadm.conf
139 * MDADM: Adding support (compiling binaries)...
140 * mdadm: >> Compiling...
141 * >> Copying to bincache...
142 * >> Appending modules cpio data...
143 * >> Appending blkid cpio data...
144 * >> Appending modprobed cpio data...
145 * >> Appending linker cpio data...
146 * >> Finalizing cpio...
147 * >> Compressing cpio data (.xz)...
148 * Creating minimal kernel package
149 * Creating modules package
150 *
151 * Kernel compiled successfully!
152 *
153 * Required Kernel Parameters:
154 * root=/dev/$ROOT
155 *
156 * Where $ROOT is the device node for your root partition as the
157 * one specified in /etc/fstab
158 *
159 * If you require Genkernel's hardware detection features; you MUST
160 * tell your bootloader to use the provided INITRAMFS file.
161
162 * WARNING... WARNING... WARNING...
163 * Additional kernel cmdline arguments that *may* be required to boot properly...
164 * add "dolvm" for lvm support
165 * add "dodmraid" for dmraid support
166 * add "domdadm" for RAID support
167 * or "dodmraid=<additional options>"
168 * With support for several ext* filesystems available, it may be needed to
169 * add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters.
170
171 * Do NOT report kernel bugs as genkernel bugs unless your bug
172 * is about the default genkernel configuration...
173 *
174 * Make sure you have the latest ~arch genkernel before reporting bugs.
175 removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp/kmerge.sh from the chroot
176 removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp/chroot-functions.sh from the chroot
177 Copying post-kmerge.sh to /tmp
178 copying post-kmerge.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp
179 copying chroot-functions.sh to /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp
180 Ensure the file has the executable bit set
181 Running post-kmerge.sh in chroot:
182 chroot /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220 /tmp/post-kmerge.sh
183 removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp/post-kmerge.sh from the chroot
184 removing /home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20151220/tmp/chroot-functions.sh from the chroot
185 22 Dec 2015 02:24:10 UTC: NOTICE : --- Running action sequence: bootloader
186 touch: cannot touch '/home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151220//livecd': No such file or directory
187 cp: cannot create regular file '/home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151220/': Not a directory
188 tar: /home/release/buildroot/amd64-dev/builds/hardened/livecd-stage2-amd64-20151220: Cannot open: No such file or directory
189 tar: Error is not recoverable: exiting now
190 Couldn't extract cdtar /usr/share/catalyst/livecd/cdtar/isolinux-elilo-memtest86+-cdtar.tar.bz2
191 22 Dec 2015 02:24:10 UTC: ERROR : CatalystError: cmd() NON-zero return value from: Bootloader script failed.
192 22 Dec 2015 02:24:11 UTC: ERROR : CatalystError: Script aborting due to error.
193 22 Dec 2015 02:24:11 UTC: ERROR : Exception running action sequence bootloader
194 Traceback (most recent call last):
195 File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
196 getattr(self, x)()
197 File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1639, in bootloader
198 raise CatalystError("Script aborting due to error.")
199 CatalystError
200 22 Dec 2015 02:24:11 UTC: NOTICE : Cleaning up... Running unbind()
201
202
203
204 Full build log at /home/release/tmp/run/catalyst-auto.fAWcg5/log/hardened_admincd-stage2.log