1 |
*** Running command: time catalyst -a -c /etc/catalyst/release/amd64-auto.conf -f stage1.spec |
2 |
28 Jan 2018 21:45:36 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/amd64-auto.conf |
3 |
28 Jan 2018 21:45:36 UTC: NOTICE : conf_values[options] = {'autoresume', 'preserve_libs', 'snapcache', 'clear-autoresume', 'bindist', 'pkgcache', 'seedcache'} |
4 |
28 Jan 2018 21:45:36 UTC: NOTICE : Processing spec file: stage1.spec |
5 |
28 Jan 2018 21:45:37 UTC: NOTICE : Using target: stage1 |
6 |
28 Jan 2018 21:45:37 UTC: NOTICE : Source file specification matching setting is: loose |
7 |
28 Jan 2018 21:45:37 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz'] |
8 |
28 Jan 2018 21:45:37 UTC: NOTICE : Source path set to /release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.xz |
9 |
28 Jan 2018 21:45:37 UTC: NOTICE : stage1 stage path is /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z/tmp/stage1root |
10 |
28 Jan 2018 21:45:37 UTC: NOTICE : Removing AutoResume Points ... |
11 |
28 Jan 2018 21:45:37 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/default/.autoresume-stage1-amd64-20180128T214502Z |
12 |
28 Jan 2018 21:45:37 UTC: NOTICE : --- Running action sequence: unpack |
13 |
28 Jan 2018 21:45:37 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar... |
14 |
28 Jan 2018 21:45:37 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled |
15 |
28 Jan 2018 21:45:37 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up... |
16 |
28 Jan 2018 21:45:37 UTC: NOTICE : Removing AutoResume Points ... |
17 |
28 Jan 2018 21:45:37 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/default/.autoresume-stage1-amd64-20180128T214502Z |
18 |
28 Jan 2018 21:45:37 UTC: NOTICE : Clearing the chroot path ... |
19 |
28 Jan 2018 21:45:37 UTC: NOTICE : Emptying directory: /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z |
20 |
28 Jan 2018 21:45:37 UTC: NOTICE : Starting auto from /release/buildroot/amd64-dev/builds/default/stage3-amd64-latest.tar.xz |
21 |
28 Jan 2018 21:45:37 UTC: NOTICE : to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z (this may take some time) .. |
22 |
28 Jan 2018 21:45:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot |
23 |
28 Jan 2018 21:45:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ... |
24 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: setup_confdir |
25 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: portage_overlay |
26 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: base_dirs |
27 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: bind |
28 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: chroot_setup |
29 |
28 Jan 2018 21:45:51 UTC: NOTICE : Setting up chroot... |
30 |
28 Jan 2018 21:45:51 UTC: WARNING : Overriding certain env variables may cause catastrophic failure. |
31 |
28 Jan 2018 21:45:51 UTC: WARNING : If your build fails look here first as the possible problem. |
32 |
28 Jan 2018 21:45:51 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables. |
33 |
28 Jan 2018 21:45:51 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all. |
34 |
28 Jan 2018 21:45:51 UTC: WARNING : You have been warned. |
35 |
28 Jan 2018 21:45:51 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z/etc/portage/make.conf |
36 |
28 Jan 2018 21:45:51 UTC: NOTICE : STICKY-CONFIG is enabled |
37 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: setup_environment |
38 |
28 Jan 2018 21:45:51 UTC: NOTICE : --- Running action sequence: run_local |
39 |
copying make.conf to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z/tmp/stage1root/etc/portage |
40 |
Copying stage1-chroot.sh to /tmp |
41 |
copying stage1-chroot.sh to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z/tmp |
42 |
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z/tmp |
43 |
Ensure the file has the executable bit set |
44 |
Running stage1-chroot.sh in chroot: |
45 |
chroot /release/buildroot/amd64-dev/tmp/default/stage1-amd64-20180128T214502Z /tmp/stage1-chroot.sh |
46 |
>>> Regenerating /etc/ld.so.cache... |
47 |
Adding USE="${USE} build" to make.conf for portage build |
48 |
emerge --quiet --oneshot --update --newuse sys-apps/portage |
49 |
|
50 |
Performing Global Updates |
51 |
(Could take a couple of minutes if you have a lot of binary packages.) |
52 |
|
53 |
|
54 |
>>> Verifying ebuild manifests |
55 |
>>> Emerging (1 of 1) sys-apps/portage-2.3.19-r1::gentoo |
56 |
>>> Installing (1 of 1) sys-apps/portage-2.3.19-r1::gentoo |
57 |
Updating seed stage... |
58 |
emerge --quiet --buildpkg=n --update --deep @world |
59 |
>>> Verifying ebuild manifests |
60 |
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4 |
61 |
>>> Running pre-merge checks for sys-fs/eudev-3.2.5 |
62 |
* |
63 |
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality, |
64 |
* as described in the URL below: |
65 |
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
66 |
* |
67 |
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing |
68 |
* between the default or user-modified choice of sys-fs/udev. If you wish to disable |
69 |
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules |
70 |
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules |
71 |
* |
72 |
>>> Emerging (1 of 12) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
73 |
>>> Installing (1 of 12) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo |
74 |
>>> Emerging (2 of 12) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
75 |
>>> Installing (2 of 12) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo |
76 |
>>> Emerging (3 of 12) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
77 |
>>> Emerging (4 of 12) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
78 |
>>> Installing (3 of 12) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo |
79 |
>>> Emerging (5 of 12) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
80 |
>>> Emerging (6 of 12) virtual/dev-manager-0-r1::gentoo |
81 |
>>> Installing (4 of 12) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo |
82 |
>>> Emerging (7 of 12) sys-apps/kbd-2.0.4::gentoo |
83 |
>>> Emerging (8 of 12) dev-libs/libxml2-2.9.7::gentoo |
84 |
>>> Installing (5 of 12) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo |
85 |
>>> Installing (8 of 12) dev-libs/libxml2-2.9.7::gentoo |
86 |
>>> Installing (6 of 12) virtual/dev-manager-0-r1::gentoo |
87 |
>>> Installing (7 of 12) sys-apps/kbd-2.0.4::gentoo |
88 |
>>> Emerging (9 of 12) dev-libs/libpipeline-1.4.2::gentoo |
89 |
>>> Emerging (10 of 12) net-misc/openssh-7.5_p1-r4::gentoo |
90 |
>>> Emerging (11 of 12) sys-fs/eudev-3.2.5::gentoo |
91 |
>>> Emerging (12 of 12) dev-libs/glib-2.52.3::gentoo |
92 |
>>> Installing (12 of 12) dev-libs/glib-2.52.3::gentoo |
93 |
>>> Installing (9 of 12) dev-libs/libpipeline-1.4.2::gentoo |
94 |
>>> Installing (11 of 12) sys-fs/eudev-3.2.5::gentoo |
95 |
>>> Installing (10 of 12) net-misc/openssh-7.5_p1-r4::gentoo |
96 |
* Messages for package sys-fs/eudev-3.2.5: |
97 |
* |
98 |
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality, |
99 |
* as described in the URL below: |
100 |
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
101 |
* |
102 |
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing |
103 |
* between the default or user-modified choice of sys-fs/udev. If you wish to disable |
104 |
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules |
105 |
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules |
106 |
* |
107 |
* Messages for package dev-libs/glib-2.52.3: |
108 |
* Unable to find kernel sources at /usr/src/linux |
109 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
110 |
* Messages for package sys-fs/eudev-3.2.5: |
111 |
* Unable to find kernel sources at /usr/src/linux |
112 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
113 |
* |
114 |
* You need to restart eudev as soon as possible to make the |
115 |
* upgrade go into effect: |
116 |
* /etc/init.d/udev --nodeps restart |
117 |
* |
118 |
* For more information on eudev on Gentoo, writing udev rules, and |
119 |
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev |
120 |
|
121 |
|
122 |
|
123 |
|
124 |
|
125 |
|
126 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout |
127 |
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/ |
128 |
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/ |
129 |
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/: |
130 |
* Initializing /tmp/stage1root/lib as a symlink |
131 |
* Initializing /tmp/stage1root/usr/lib as a symlink |
132 |
* Initializing /tmp/stage1root/usr/local/lib as a symlink |
133 |
* You should reboot now to get /run mounted with tmpfs! |
134 |
|
135 |
|
136 |
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/flex sys-devel/gnuconfig sys-apps/makedev net-misc/rsync sys-devel/automake sys-apps/gawk sys-apps/diffutils app-arch/gzip net-misc/wget sys-apps/sed sys-devel/bison app-arch/xz-utils sys-devel/patch sys-devel/libtool sys-apps/grep sys-devel/binutils virtual/os-headers sys-apps/coreutils sys-devel/autoconf sys-devel/gcc app-arch/tar virtual/package-manager virtual/libc sys-apps/which virtual/shadow virtual/editor sys-devel/gettext sys-apps/file app-shells/bash:0 sys-apps/findutils virtual/pkgconfig sys-apps/less sys-apps/net-tools sys-apps/baselayout app-arch/bzip2 sys-devel/make |
137 |
|
138 |
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements. |
139 |
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" ABI_X86="(64)" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)" |
140 |
|
141 |
The following REQUIRED_USE flag constraints are unsatisfied: |
142 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) |
143 |
|
144 |
The above constraints are a subset of the following complete expression: |
145 |
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 ) |
146 |
|
147 |
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild]) |
148 |
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary]) |
149 |
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary]) |
150 |
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary]) |
151 |
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary]) |
152 |
(dependency required by "sys-devel/libtool" [argument]) |
153 |
28 Jan 2018 21:51:49 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
154 |
28 Jan 2018 21:51:50 UTC: ERROR : CatalystError: Stage build aborting due to error. |
155 |
28 Jan 2018 21:51:50 UTC: ERROR : Exception running action sequence run_local |
156 |
Traceback (most recent call last): |
157 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local |
158 |
env=self.env) |
159 |
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd |
160 |
print_traceback=False) |
161 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1 |
162 |
|
163 |
During handling of the above exception, another exception occurred: |
164 |
|
165 |
Traceback (most recent call last): |
166 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run |
167 |
getattr(self, x)() |
168 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local |
169 |
print_traceback=False) |
170 |
catalyst.support.CatalystError: Stage build aborting due to error. |
171 |
28 Jan 2018 21:51:50 UTC: NOTICE : Cleaning up... Running unbind() |
172 |
Command exited with non-zero status 2 |
173 |
570.58user 271.52system 6:13.36elapsed 225%CPU (0avgtext+0avgdata 1405456maxresident)k |
174 |
1896inputs+4554048outputs (0major+40457812minor)pagefaults 0swaps |
175 |
|
176 |
|
177 |
|
178 |
Full build log at /release/tmp/run/catalyst-auto.20180128T214502Z.99xKrR/log/stage1.log |