1 |
* Working directory: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
2 |
* S: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
3 |
* Messages for package sys-power/acpid-2.0.23: |
4 |
* Unable to find kernel sources at /usr/src/linux |
5 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
6 |
* Messages for package sys-fs/eudev-3.1.5: |
7 |
* |
8 |
* As of 2013-01-29, eudev-3.1.5 provides the new interface renaming functionality, |
9 |
* as described in the URL below: |
10 |
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames |
11 |
* |
12 |
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing |
13 |
* between the default or user-modified choice of sys-fs/udev. If you wish to disable |
14 |
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules |
15 |
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules |
16 |
* |
17 |
* Messages for package net-misc/vconfig-1.9: |
18 |
* MTU problems exist for many ethernet drivers. |
19 |
* Reduce the MTU on the interface to 1496 to work around them. |
20 |
* Messages for package sys-apps/keyutils-1.5.9-r1: |
21 |
* Unable to find kernel sources at /usr/src/linux |
22 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
23 |
* Messages for package sys-apps/busybox-1.24.2: |
24 |
* Could not locate user configfile, so we will save a default one |
25 |
* You cannot have USE='static pam'. Assuming static is more important. |
26 |
* Your configuration for sys-apps/busybox-1.24.2 has been saved in |
27 |
* /etc/portage/savedconfig/sys-apps/busybox-1.24.2 for your editing pleasure. |
28 |
* You can edit these files by hand and remerge this package with |
29 |
* USE=savedconfig to customise the configuration. |
30 |
* You can rename this file/directory to one of the following for |
31 |
* its configuration to apply to multiple versions: |
32 |
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/ |
33 |
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}] |
34 |
* Messages for package net-dialup/ppp-2.4.7: |
35 |
* Unable to find kernel sources at /usr/src/linux |
36 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
37 |
* Pon, poff and plog scripts have been supplied for experienced users. |
38 |
* Users needing particular scripts (ssh,rsh,etc.) should check out the |
39 |
* /usr/share/doc/ppp-2.4.7/scripts directory. |
40 |
* Messages for package app-misc/screen-4.3.1-r1: |
41 |
* Some dangerous key bindings have been removed or changed to more safe values. |
42 |
* We enable some xterm hacks in our default screenrc, which might break some |
43 |
* applications. Please check /etc/screenrc for information on these changes. |
44 |
* This revision changes the screen socket location to /tmp/screen |
45 |
* Messages for package net-dialup/rp-pppoe-3.11-r3: |
46 |
* Use pppoe-setup to configure your dialup connection |
47 |
* |
48 |
* (Note: Above message is only printed the first time package is |
49 |
* installed. Please look at /usr/share/doc/rp-pppoe-3.11-r3/README.gentoo* |
50 |
* for future reference) |
51 |
* Messages for package net-fs/cifs-utils-6.4: |
52 |
* Unable to find kernel sources at /usr/src/linux |
53 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
54 |
* You must enable CIFS support in your kernel config, |
55 |
* to be able to mount samba shares. You can find it at |
56 |
* |
57 |
* File systems |
58 |
* Network File Systems |
59 |
* CIFS support |
60 |
* |
61 |
* and recompile your kernel ... |
62 |
* setuid use flag was dropped due to multiple security implications |
63 |
* such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586 |
64 |
* You are free to set setuid flags by yourself |
65 |
* Messages for package sys-apps/openrc-0.19.1: |
66 |
* In this version of OpenRC, the loopback interface no longer |
67 |
* satisfies the net virtual. |
68 |
* If you have services now which do not start because of this, |
69 |
* They can be fixed by adding rc_need="!net" |
70 |
* to the /etc/conf.d/<servicename> file. |
71 |
* You should also file a bug against the service asking that |
72 |
* need net be dropped from the dependencies. |
73 |
* The bug you file should block the following tracker: |
74 |
* https://bugs.gentoo.org/show_bug.cgi?id=439092 |
75 |
* |
76 |
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not |
77 |
* fixed correctly in earlier versions of OpenRC. |
78 |
* The correct fix is implemented in this version, but that |
79 |
* means netmount needs to be added to the default runlevel if |
80 |
* you are using nfs file systems. |
81 |
* |
82 |
* You should now update all files in /etc, using etc-update |
83 |
* or equivalent before restarting any services or this host. |
84 |
* Messages for package sys-fs/fuse-2.9.4: |
85 |
* Unable to find kernel sources at /usr/src/linux |
86 |
* Unable to calculate Linux Kernel version for build, attempting to use running version |
87 |
* Messages for package app-accessibility/brltty-5.2-r1: |
88 |
* |
89 |
* please be sure /etc/brltty.conf is correct for your system. |
90 |
* |
91 |
* To make brltty start on boot, type this command as root: |
92 |
* |
93 |
* rc-update add brltty boot |
94 |
* Messages for package app-admin/hddtemp-0.3_beta15-r7: |
95 |
* In order to update your hddtemp database, run: |
96 |
* emerge --config =app-admin/hddtemp-0.3_beta15-r7 |
97 |
* |
98 |
* If your hard drive is not recognized by hddtemp, please consider |
99 |
* submitting your HDD info for inclusion into the Gentoo hddtemp |
100 |
* database by filing a bug at https://bugs.gentoo.org/ |
101 |
* |
102 |
* If hddtemp complains but finds your HDD temperature sensor, use the |
103 |
* --quiet option to suppress the warning. |
104 |
* |
105 |
* (Note: Above message is only printed the first time package is |
106 |
* installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo* |
107 |
* for future reference) |
108 |
* Messages for package sys-power/acpid-2.0.23: |
109 |
* |
110 |
* You may wish to read the Gentoo Linux Power Management Guide, |
111 |
* which can be found online at: |
112 |
* https://www.gentoo.org/doc/en/power-management-guide.xml |
113 |
* |
114 |
* You should reboot the system now to get /run mounted with tmpfs! |
115 |
* Messages for package net-wireless/wpa_supplicant-2.5-r1: |
116 |
* If this is a clean installation of wpa_supplicant, you |
117 |
* have to create a configuration file named |
118 |
* /etc/wpa_supplicant/wpa_supplicant.conf |
119 |
* |
120 |
* An example configuration file is available for reference in |
121 |
* /usr/share/doc/wpa_supplicant-2.5-r1/ |
122 |
* Messages for package dev-python/cryptography-1.1.2: |
123 |
* ERROR: dev-python/cryptography-1.1.2::gentoo failed (compile phase): |
124 |
* (no error message) |
125 |
* |
126 |
* Call stack: |
127 |
* ebuild.sh, line 133: Called src_compile |
128 |
* environment, line 3682: Called distutils-r1_src_compile |
129 |
* environment, line 977: Called _distutils-r1_run_foreach_impl 'distutils-r1_python_compile' |
130 |
* environment, line 377: Called python_foreach_impl 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
131 |
* environment, line 3217: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
132 |
* environment, line 2326: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
133 |
* environment, line 2324: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'distutils-r1_python_compile' |
134 |
* environment, line 644: Called distutils-r1_run_phase 'distutils-r1_python_compile' |
135 |
* environment, line 968: Called distutils-r1_python_compile |
136 |
* environment, line 843: Called esetup.py 'build' |
137 |
* environment, line 1470: Called die |
138 |
* The specific snippet of code: |
139 |
* "${@}" || die "${die_args[@]}"; |
140 |
* |
141 |
* If you need support, post the output of `emerge --info '=dev-python/cryptography-1.1.2::gentoo'`, |
142 |
* the complete build log and the output of `emerge -pqv '=dev-python/cryptography-1.1.2::gentoo'`. |
143 |
* The complete build log is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/build.log'. |
144 |
* The ebuild environment file is located at '/var/tmp/portage/dev-python/cryptography-1.1.2/temp/environment'. |
145 |
* Working directory: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
146 |
* S: '/var/tmp/portage/dev-python/cryptography-1.1.2/work/cryptography-1.1.2' |
147 |
|
148 |
|
149 |
|
150 |
|
151 |
|
152 |
|
153 |
|
154 |
|
155 |
|
156 |
|
157 |
|
158 |
|
159 |
|
160 |
|
161 |
|
162 |
|
163 |
|
164 |
|
165 |
|
166 |
|
167 |
|
168 |
|
169 |
|
170 |
|
171 |
|
172 |
|
173 |
|
174 |
|
175 |
|
176 |
|
177 |
|
178 |
|
179 |
13 Jul 2016 08:19:54 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/mg', 'app-misc/screen', 'app-misc/vlock', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'media-gfx/fbgrab', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/vconfig', 'net-proxy/dante', 'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/apmd', 'sys-apps/busybox', 'sys-apps/dmidecode', 'sys-apps/ethtool', 'sys-apps/fxload', 'sys-apps/gptfdisk', |
180 |
'sys-apps/hdparm', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/memtester', 'sys-apps/netplug', 'sys-apps/sdparm', 'sys-block/parted', 'sys-block/partimage', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'www-client/links', 'app-misc/livecd-tools']) exited 1 |
181 |
13 Jul 2016 08:19:54 UTC: ERROR : CatalystError: livecdbuild aborting due to error. |
182 |
13 Jul 2016 08:19:54 UTC: ERROR : Exception running action sequence build_packages |
183 |
Traceback (most recent call last): |
184 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1487, in build_packages |
185 |
cmd(command, env=self.env) |
186 |
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd |
187 |
print_traceback=False) |
188 |
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/mg', 'app-misc/screen', 'app-misc/vlock', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'media-gfx/fbgrab', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/vconfig', 'net-proxy/dante', 'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/apmd', 'sys-apps/busybox', 'sys-apps/dmidecode', 'sys-apps/ethtool', 'sys-apps/fxload', 'sys-apps/gptfdisk', 'sys-apps/hdparm', |
189 |
'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/memtester', 'sys-apps/netplug', 'sys-apps/sdparm', 'sys-block/parted', 'sys-block/partimage', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'www-client/links', 'app-misc/livecd-tools']) exited 1 |
190 |
|
191 |
During handling of the above exception, another exception occurred: |
192 |
|
193 |
Traceback (most recent call last): |
194 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run |
195 |
getattr(self, x)() |
196 |
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1493, in build_packages |
197 |
"build aborting due to error.") |
198 |
catalyst.support.CatalystError: livecdbuild aborting due to error. |
199 |
13 Jul 2016 08:19:54 UTC: NOTICE : Cleaning up... Running unbind() |
200 |
Command exited with non-zero status 2 |
201 |
3049.27user 522.62system 48:18.44elapsed 123%CPU (0avgtext+0avgdata 601244maxresident)k |
202 |
192inputs+11358536outputs (1major+225567810minor)pagefaults 0swaps |
203 |
|
204 |
|
205 |
|
206 |
Full build log at /home/release/tmp/run/catalyst-auto.20160713.MqlFH1/log/installcd-stage1.log |