[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - hardened/admincd-stage2.spec

* The complete build log is located at '/var/log/portage/sys-kernel:spl-0.6.3-r1:20150119-140546.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-kernel/spl-0.6.3-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-kernel/spl-0.6.3-r1/temp/die.env'.
 * Working directory: '/usr/lib64/python2.7/site-packages'
 * S: '/var/tmp/portage/sys-kernel/spl-0.6.3-r1/work/spl-spl-0.6.3'

* <<< Callback exit status: 1
* ERROR: --callback failed!
* 
* -- Grepping log... --
* 
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* Linux Kernel 3.17.7-hardened-r1 for x86_64...
* .. with config file /var/tmp/gentoo.config
* WARNING: No mounted /boot partition detected!
*--
*Allow for memory hot-add (MEMORY_HOTPLUG) [N/y] n
*Allow for memory compaction (COMPACTION) [N/y/?] n
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
*torture tests for RCU (RCU_TORTURE_TEST) [N/m/y/?] n
*RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [60] 60
*Print additional diagnostics on RCU CPU stall (RCU_CPU_STALL_INFO) [N/y/?] n
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] n
*--
*  CC      crypto/des_generic.o
*  CC      fs/utimes.o
*  CC      arch/x86/kernel/cpu/mcheck/mce.o
*  CC      arch/x86/kernel/pmc_atom.o
*arch/x86/kernel/pmc_atom.c: In function 'pmc_setup_dev':
*arch/x86/kernel/pmc_atom.c:243:6: warning: unused variable 'ret' [-Wunused-variable]
*--
*  LD      net/sunrpc/built-in.o
*  LD      net/built-in.o
*  LINK    vmlinux
*  LD      vmlinux.o
*  MODPOST vmlinux.o
*WARNING: modpost: Found 4139 section mismatch(es).
*--
*  CC [M]  crypto/sha512_generic.o
*  CC [M]  arch/x86/kvm/mmu.o
*  CC [M]  arch/x86/kvm/emulate.o
*  CC [M]  crypto/wp512.o
*arch/x86/kvm/x86.c: In function 'kvm_arch_init':
*arch/x86/kvm/x86.c:5649:28: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
*--
*  CC [M]  drivers/char/ipmi/ipmi_smic_sm.o
*  CC [M]  net/ipv4/xfrm4_tunnel.o
*  CC [M]  sound/pci/ca0106/ca0106_proc.o
*  CC [M]  drivers/char/ipmi/ipmi_bt_sm.o
*net/ipv6/addrconf.c: In function 'if6_proc_net_init':
*net/ipv6/addrconf.c:3539:2: warning: passing argument 1 of 'register_ipv6_seq_ops_addr' discards 'const' qualifier from pointer target type [enabled by default]
*--
*  CC [M]  drivers/mmc/core/sdio_cis.o
*  CC [M]  drivers/message/i2o/iop.o
*  CC [M]  drivers/md/dm-exception-store.o
*In file included from drivers/message/i2o/config-osm.c:39:0:
*drivers/message/i2o/i2o_config.c: In function 'i2o_cfg_passthru':
*drivers/message/i2o/i2o_config.c:893:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
*         (p->virt, (void __user *)sg[i].addr_bus,
*                   ^
*drivers/message/i2o/i2o_config.c:953:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
*         ((void __user *)sg[j].addr_bus, sg_list[j].virt,
*          ^
*  CC [M]  drivers/infiniband/hw/mlx4/mcg.o
*  CC [M]  drivers/mmc/core/sdio_io.o
*  CC [M]  drivers/mmc/core/sdio_irq.o
*drivers/message/i2o/i2o_config.c:992:1: warning: the frame size of 1352 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*  CC [M]  drivers/infiniband/hw/mthca/mthca_cmd.o
*drivers/message/i2o/i2o_config.c: In function 'i2o_cfg_passthru32.isra.2':
*drivers/message/i2o/i2o_config.c:751:1: warning: the frame size of 1352 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC [M]  drivers/scsi/advansys.o
*  CC [M]  drivers/net/ethernet/adaptec/starfire.o
*  CC [M]  drivers/net/fddi/skfp/pcmplc.o
*  CC [M]  drivers/staging/speakup/varhandlers.o
*  CC [M]  drivers/vhost/vringh.o
*drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API [-Wcpp]
* #warning this driver is still not properly converted to the DMA API
*--
*  CC [M]  drivers/video/backlight/lcd.o
*  CC [M]  drivers/net/ethernet/alteon/acenic.o
*  CC [M]  drivers/platform/x86/toshiba_acpi.o
*  CC [M]  drivers/vhost/vhost.o
*drivers/net/ethernet/alteon/acenic.c: In function 'ace_init':
*drivers/net/ethernet/alteon/acenic.c:1013:4: warning: format '%i' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat=]
*    printk("expecting %i
", SMP_CACHE_BYTES);
*    ^
*drivers/net/ethernet/alteon/acenic.c:1015:4: warning: format '%i' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat=]
*    printk("correcting to %i
", SMP_CACHE_BYTES);
*    ^
*drivers/net/ethernet/alteon/acenic.c:1073:12: warning: format '%i' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat=]
*--
*  CC [M]  drivers/platform/x86/intel_oaktrail.o
*  CC [M]  drivers/net/fddi/skfp/smttimer.o
*  CC [M]  drivers/scsi/dpt_i2o.o
*  CC [M]  drivers/usb/class/cdc-acm.o
*drivers/net/ethernet/amd/nmclan_cs.c: In function 'nmclan_config':
*drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: 'pcmcia_request_exclusive_irq' is deprecated (declared at include/pcmcia/ds.h:213) [-Wdeprecated-declarations]
*--
*  CC [M]  drivers/net/ethernet/sis/sis900.o
*  CC [M]  drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.o
*  CC [M]  drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.o
*  CC [M]  drivers/net/ethernet/qlogic/qlge/qlge_dbg.o
*drivers/net/ethernet/neterion/vxge/vxge-main.c: In function 'vxge_poll_inta':
*drivers/net/ethernet/neterion/vxge/vxge-main.c:1873:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*drivers/net/ethernet/neterion/vxge/vxge-main.c: In function 'vxge_tx_msix_handle':
*drivers/net/ethernet/neterion/vxge/vxge-main.c:2248:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC [M]  drivers/net/ethernet/sfc/ptp.o
*  CC [M]  drivers/net/ethernet/sfc/siena_sriov.o
*  LD [M]  drivers/net/ethernet/sfc/sfc.o
*  Building modules, stage 2.
*  MODPOST 960 modules
*WARNING: modpost: Found 14589 section mismatch(es).
*--
*>>> Emerging (5 of 16) media-libs/alsa-lib-1.0.28::gentoo
*>>> Installing (5 of 16) media-libs/alsa-lib-1.0.28::gentoo
*>>> Emerging (6 of 16) virtual/awk-1::gentoo
*>>> Installing (6 of 16) virtual/awk-1::gentoo
*>>> Emerging (7 of 16) sys-kernel/spl-0.6.3-r1::gentoo
*>>> Failed to emerge sys-kernel/spl-0.6.3-r1, Log file:
*--
* * Found sources for kernel version:
* *     3.17.7-hardened-r1
* * Checking for suitable kernel configuration options...
* *   CONFIG_PAX_RANDKSTACK:	 should not be set. But it is.
* * Please check to make sure these options are set correctly.
* * Failure to do so may cause unexpected problems.
* * Once you have satisfied these options, please try merging
* * this package again.
* * ERROR: sys-kernel/spl-0.6.3-r1::gentoo failed (setup phase):
*--
*
* * Messages for package sys-kernel/spl-0.6.3-r1:
*
* *   CONFIG_PAX_RANDKSTACK:	 should not be set. But it is.
* * Please check to make sure these options are set correctly.
* * Failure to do so may cause unexpected problems.
* * Once you have satisfied these options, please try merging
* * this package again.
* * ERROR: sys-kernel/spl-0.6.3-r1::gentoo failed (setup phase):
*--
* Running with options: --callback=emerge -qN app-accessibility/espeakup media-libs/alsa-oss media-sound/alsa-utils net-dialup/globespan-adsl sys-apps/pcmciautils sys-kernel/linux-firmware sys-kernel/spl sys-fs/zfs sys-fs/zfs-kmod --lvm --dmraid --mdadm --makeopts=-j8 --cachedir=/tmp/kerncache/gentoo-genkernel_cache-20150119 --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-20150119.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-20150119.tar.bz2 all --kernel-config=/var/tmp/gentoo.config
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: --callback failed!
* 
* -- End log... --
* 
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@g.o. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
* 
* Please do *not* report compilation failures as genkernel bugs!
* 

!!! catalyst: Runscript kernel build failed


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1428, in build_kernel
    self._build_kernel(kname=kname)
  File "modules/generic_stage_target.py", line 1472, in _build_kernel
    "Runscript kernel build failed",env=self.env)
  File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: build aborting due to kernel build error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1433, in build_kernel
    "build aborting due to kernel build error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage2
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/amd64-dev/tmp/hardened/livecd-stage2-amd64-20150119/.catalyst_lock'



Full build log at /home/release/tmp/run/catalyst-auto.E0GOz0/log/hardened_admincd-stage2.log