[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - stage4-nomultilib-minimal.spec

* Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-power/acpid-2.0.31:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://wiki.gentoo.org/wiki/Power_management/Guide
 * 
 * You should reboot the system now to get /run mounted with tmpfs!
 * Messages for package sys-boot/grub-2.02-r4:
 * For information on how to configure GRUB2 please refer to the guide:
 *     https://wiki.gentoo.org/wiki/GRUB2_Quick_Start
 * 
 * You may consider installing the following optional packages:
 *   sys-boot/os-prober for Detect other operating systems (grub-mkconfig)
 *   dev-libs/libisoburn for Create rescue media (grub-mkrescue)
 *   sys-fs/mdadm for Enable RAID device detection






removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp/stage4-chroot.sh from the chroot
removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp/chroot-functions.sh from the chroot
09 Dec 2019 01:02:40 UTC: NOTICE  : --- Running action sequence: build_kernel
NOTICE:catalyst:--- Running action sequence: build_kernel
Copying pre-kmerge.sh to /tmp
copying pre-kmerge.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp
Ensure the file has the executable bit set
Running pre-kmerge.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z /tmp/pre-kmerge.sh
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse --oneshot genkernel
>>> Running pre-merge checks for sys-kernel/linux-firmware-20191108
>>> Running pre-merge checks for sys-kernel/genkernel-3.5.3.3
>>> Emerging binary (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Installing (1 of 3) app-arch/cpio-2.12-r1::gentoo
>>> Emerging binary (2 of 3) sys-kernel/linux-firmware-20191108::gentoo
>>> Installing (2 of 3) sys-kernel/linux-firmware-20191108::gentoo
>>> Emerging binary (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
>>> Installing (3 of 3) sys-kernel/genkernel-3.5.3.3::gentoo
 * Messages for package sys-kernel/linux-firmware-20191108:
 * This package will overwrite one or more files that may belong to other
 * packages (see list below).
 * 
 * Detected file collision(s):
 * 
 * 	/etc/portage/savedconfig/sys-kernel/linux-firmware
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'sys-kernel/linux-firmware-20191108' merged despite file
 * collisions. If necessary, refer to your elog messages for the whole
 * content of the above message.
 * USE=savedconfig is active. You must handle file collisions manually.
 * If you are only interested in particular firmware files, edit the saved
 * configfile and remove those that you do not want.
 * Messages for package sys-kernel/genkernel-3.5.3.3:
 * Documentation is available in the genkernel manual page
 * as well as the following URL:
 * https://wiki.gentoo.org/wiki/Genkernel
 * This package is known to not work with reiser4.  If you are running
 * reiser4 and have a problem, do not file a bug.  We know it does not
 * work and we don't plan on fixing it since reiser4 is the one that is
 * broken in this regard.  Try using a sane filesystem like ext4.
 * The LUKS support has changed from versions prior to 3.4.4.  Now,
 * you use crypt_root=/dev/blah instead of real_root=luks:/dev/blah.




removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp/pre-kmerge.sh from the chroot
removing /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp/chroot-functions.sh from the chroot
Copying kmerge.sh to /tmp
copying kmerge.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z/tmp
Ensure the file has the executable bit set
Running kmerge.sh in chroot:
    chroot /release/buildroot/amd64-dev/tmp/default/stage4-amd64-minimal-nomultilib-20191208T214503Z /tmp/kmerge.sh
>>> Regenerating /etc/ld.so.cache...
Genkernel version 3.5.3.3 found ... OK
emerge --quiet --usepkg --buildpkg --binpkg-respect-use=y --newuse gentoo-sources
>>> Emerging binary (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Installing (1 of 3) dev-libs/elfutils-0.177::gentoo
>>> Emerging binary (2 of 3) virtual/libelf-3::gentoo
>>> Installing (2 of 3) virtual/libelf-3::gentoo
>>> Emerging binary (3 of 3) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Installing (3 of 3) sys-kernel/gentoo-sources-4.19.86::gentoo
>>> Recording sys-kernel/gentoo-sources in "world" favorites file...
 * Messages for package sys-kernel/gentoo-sources-4.19.86:
 * If you are upgrading from a previous kernel, you may be interested
 * in the following document:
 *   - General upgrade guide: https://wiki.gentoo.org/wiki/Kernel/Upgrade


Adjusting /usr/src/linux to point to /usr/src/linux-4.19.86-gentoo
Setting extraversion to openstack
* Gentoo Linux Genkernel; Version 3.5.3.3
* Running with options: --all-ramdisk-modules --cachedir=/tmp/kerncache/gentoo-genkernel_cache-minimal-nomultilib-20191208T214503Z --no-mountboot --kerneldir=/usr/src/linux --modulespackage=/tmp/kerncache/gentoo-modules-minimal-nomultilib-20191208T214503Z.tar.bz2 --minkernpackage=/tmp/kerncache/gentoo-kernel-initrd-minimal-nomultilib-20191208T214503Z.tar.bz2 all --kernel-config=/var/tmp/gentoo.config

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.19.86-gentoo-openstack for x86_64...
* .. with config file /var/tmp/gentoo.config
* kernel: Using config from /var/tmp/gentoo.config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
*         >> Compiling 4.19.86-gentoo-openstack bzImage...
/usr/share/genkernel/gen_funcs.sh: line 47: echo: write error: No space left on device
* ERROR: Failed to compile the "bzImage" target...
/usr/share/genkernel/gen_funcs.sh: line 142: printf: write error: No space left on device
/usr/share/genkernel/gen_funcs.sh: line 149: echo: write error: No space left on device
* 
/usr/share/genkernel/gen_funcs.sh: line 142: printf: write error: No space left on device
/usr/share/genkernel/gen_funcs.sh: line 149: echo: write error: No space left on device
* -- Grepping log... --
/usr/share/genkernel/gen_funcs.sh: line 142: printf: write error: No space left on device
/usr/share/genkernel/gen_funcs.sh: line 149: echo: write error: No space left on device
* 
/usr/share/genkernel/gen_funcs.sh: line 142: printf: write error: No space left on device
/usr/share/genkernel/gen_funcs.sh: line 149: echo: write error: No space left on device
*  Debug Statements (ACPI_DEBUG) [N/y/?] n
*  PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] y
*  Memory Hotplug (ACPI_HOTPLUG_MEMORY) [N/y/?] n
*  Smart Battery System (ACPI_SBS) [N/m/y/?] n
*  Hardware Error Device (ACPI_HED) [N/m/y/?] n
*  Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [N/m/y/?] (NEW) 
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] n
*  Hardware-reduced ACPI support only (ACPI_REDUCED_HARDWARE_ONLY) [N/y/?] n
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW) 
*  ACPI Platform Error Interfa09 Dec 2019 01:06:09 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1
09 Dec 2019 01:06:10 UTC: ERROR   : CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1
ERROR:catalyst:CatalystError: build aborting due to kernel build error.
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1
09 Dec 2019 01:06:10 UTC: ERROR   : Exception running action sequence build_kernel
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
    print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
ERROR:catalyst:Exception running action sequence build_kernel
Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1585, in build_kernel
    self._build_kernel(kname = kname)
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1622, in _build_kernel
    env=self.env)
  File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage4/stage4-controller.sh', 'kernel', 'gentoo']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
    getattr(self, x)()
  File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1591, in build_kernel
    print_traceback=True)
catalyst.support.CatalystError: build aborting due to kernel build error.
09 Dec 2019 01:06:10 UTC: NOTICE  : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
Command exited with non-zero status 2
401.17user 76.30system 5:32.30elapsed 143%CPU (0avgtext+0avgdata 350052maxresident)k
192inputs+5216960outputs (0major+11315311minor)pagefaults 0swaps



Full build log at /release/tmp/run/catalyst-auto.20191208T214503Z.EFONUd/log/stage4-nomultilib-minimal.log