[gentoo-releng-autobuilds] [amd64-auto] Catalyst non-fatal build error - installcd-stage1.spec

* 
 * To make brltty start on boot, type this command as root:
 * 
 * rc-update add brltty boot
 * Messages for package app-admin/hddtemp-0.3_beta15-r7:
 * In order to update your hddtemp database, run:
 * emerge --config =app-admin/hddtemp-0.3_beta15-r7
 * 
 * If your hard drive is not recognized by hddtemp, please consider
 * submitting your HDD info for inclusion into the Gentoo hddtemp
 * database by filing a bug at https://bugs.gentoo.org/
 * 
 * If hddtemp complains but finds your HDD temperature sensor, use the
 * --quiet option to suppress the warning.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/hddtemp-0.3_beta15-r7/README.gentoo*
 * for future reference)
 * Messages for package sys-power/acpid-2.0.28:
 * 
 * You may wish to read the Gentoo Linux Power Management Guide,
 * which can be found online at:
 * https://wiki.gentoo.org/wiki/Power_management/Guide
 * 
 * You should reboot the system now to get /run mounted with tmpfs!
 * Messages for package net-wireless/wpa_supplicant-2.6:
 * If this is a clean installation of wpa_supplicant, you
 * have to create a configuration file named
 * /etc/wpa_supplicant/wpa_supplicant.conf
 * 
 * An example configuration file is available for reference in
 * /usr/share/doc/wpa_supplicant-2.6/
 * Messages for package net-misc/dhcpcd-6.11.3:
 * 
 * dhcpcd has zeroconf support active by default.
 * This means it will always obtain an IP address even if no
 * DHCP server can be contacted, which will break any existing
 * failover support you may have configured in your net configuration.
 * This behaviour can be controlled with the noipv4ll configuration
 * file option or the -L command line switch.
 * See the dhcpcd and dhcpcd.conf man pages for more details.
 * 
 * Dhcpcd has duid enabled by default, and this may cause issues
 * with some dhcp servers. For more information, see
 * https://bugs.gentoo.org/show_bug.cgi?id=477356
 * 
 * If you activate the lookup-hostname hook to look up your hostname
 * using the dns, you need to install net-dns/bind-tools.
 * Messages for package app-text/asciidoc-8.6.9-r2:
 * If you are going to use a2x, please also look at a2x(1) under
 * REQUISITES for a list of runtime dependencies.
 * 
 * (Note: Above message is only printed the first time package is
 * installed. Please look at /usr/share/doc/asciidoc-8.6.9-r2/README.gentoo*
 * for future reference)
 * Messages for package sys-apps/util-linux-2.28.2:
 * The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
 * Messages for package sys-fs/eudev-3.1.5:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * 
 * You need to restart eudev as soon as possible to make the
 * upgrade go into effect:
 * 	/etc/init.d/udev --nodeps restart
 * 
 * For more information on eudev on Gentoo, writing udev rules, and
 * fixing known issues visit:
 *          https://www.gentoo.org/doc/en/udev-guide.xml
 * 
 * Messages for package sys-fs/mdadm-3.4:
 * If you're not relying on kernel auto-detect of your RAID
 * devices, you need to add 'mdraid' to your 'boot' runlevel:
 * 	rc-update add mdraid boot
 * Messages for package sys-fs/ntfs3g-2016.2.22-r2:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-libs/libkudzu-1.2.57.1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-apps/hwsetup-1.2-r3:
 * This package is designed for use on the LiveCD only and will do 
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * This package is intended for use on the Gentoo release media.  If
 * you are not building a CD, remove this package.  It will not work
 * properly on a running system, as Gentoo does not use any of the
 * Knoppix-style detection except for CD builds.
 * Messages for package sys-fs/lvm2-2.02.116-r4:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Notice that "use_lvmetad" setting is enabled with USE="udev" in
 * /etc/lvm/lvm.conf, which will require restart of udev, lvm, and lvmetad
 * if it was previously disabled.
 * Make sure the "lvm" init script is in the runlevels:
 * # rc-update add lvm boot
 * 
 * Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want
 * to enable lvm autoactivation and metadata caching.
 * 
 * After enabling or disabling lvmetad in /etc/lvm/lvm.conf you must
 * run the following to update the init script dependencies: 
 * # rc-update -u
 * Messages for package net-fs/nfs-utils-1.3.1-r5:
 * If you use OpenRC, the nfsmount service has been replaced with nfsclient.
 * If you were using nfsmount, please add nfsclient and netmount to the
 * same runlevel as nfsmount.
 * Messages for package app-misc/livecd-tools-2.3:
 * This package is designed for use on the LiveCD only and will do
 * unspeakably horrible and unexpected things on a normal system.
 * YOU HAVE BEEN WARNED!!!
 * Messages for package sys-fs/cryptsetup-1.7.2:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package sys-fs/dmraid-1.0.0_rc16-r3:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * ERROR: sys-fs/dmraid-1.0.0_rc16-r3::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=sys-fs/dmraid-1.0.0_rc16-r3::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-fs/dmraid-1.0.0_rc16-r3::gentoo'`.
 * The complete build log is located at '/home/release/tmp/logs/sys-fs:dmraid-1.0.0_rc16-r3:20170304-194030.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/sys-fs/dmraid-1.0.0_rc16-r3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-fs/dmraid-1.0.0_rc16-r3/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-fs/dmraid-1.0.0_rc16-r3/work/dmraid/1.0.0.rc16-3/dmraid'
 * S: '/var/tmp/portage/sys-fs/dmraid-1.0.0_rc16-r3/work/dmraid/1.0.0.rc16-3/dmraid'




















































04 Mar 2017 19:40:42 UTC: ERROR   : CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/mg', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'media-gfx/fbgrab', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/vconfig', 'net-proxy/dante', 'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/busybox', 'sys-apps/dmidecode', 'sys-apps/ethtool', 'sys-apps/fxload', 'sys-apps/gptfdisk', 'sys-apps/hdpar
 m', 'sys-apps/hwsetup', 'sys-apps/iproute2', 'sys-apps/memtester', 'sys-apps/netplug', 'sys-apps/sdparm', 'sys-block/parted', 'sys-block/partimage', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'www-client/links', 'app-misc/livecd-tools']) exited 1
04 Mar 2017 19:40:43 UTC: ERROR   : CatalystError: livecdbuild aborting due to error.
04 Mar 2017 19:40:43 UTC: ERROR   : Exception running action sequence build_packages
Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1512, in build_packages
    cmd(command, env=self.env)
  File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
    print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/livecd-stage1/livecd-stage1-controller.sh', 'build_packages', 'app-accessibility/brltty', 'app-admin/hddtemp', 'app-admin/passook', 'app-admin/pwgen', 'app-admin/syslog-ng', 'app-arch/unzip', 'app-crypt/gnupg', 'app-editors/mg', 'app-misc/screen', 'app-portage/mirrorselect', 'app-text/wgetpaste', 'media-gfx/fbgrab', 'net-analyzer/traceroute', 'net-dialup/mingetty', 'net-dialup/pptpclient', 'net-dialup/rp-pppoe', 'net-fs/cifs-utils', 'net-fs/nfs-utils', 'net-irc/irssi', 'net-misc/dhcpcd', 'net-misc/iputils', 'net-misc/ndisc6', 'net-misc/ntp', 'net-misc/openssh', 'net-misc/rdate', 'net-misc/rsync', 'net-misc/vconfig', 'net-proxy/dante', 'net-proxy/tsocks', 'net-wireless/b43-fwcutter', 'net-wireless/iw', 'net-wireless/rfkill', 'net-wireless/wireless-tools', 'net-wireless/wpa_supplicant', 'sys-apps/busybox', 'sys-apps/dmidecode', 'sys-apps/ethtool', 'sys-apps/fxload', 'sys-apps/gptfdisk', 'sys-apps/hdparm', 'sys-apps/hwset
 up', 'sys-apps/iproute2', 'sys-apps/memtester', 'sys-apps/netplug', 'sys-apps/sdparm', 'sys-block/parted', 'sys-block/partimage', 'sys-fs/btrfs-progs', 'sys-fs/cryptsetup', 'sys-fs/dmraid', 'sys-fs/dosfstools', 'sys-fs/e2fsprogs', 'sys-fs/f2fs-tools', 'sys-fs/jfsutils', 'sys-fs/lsscsi', 'sys-fs/lvm2', 'sys-fs/mac-fdisk', 'sys-fs/mdadm', 'sys-fs/multipath-tools', 'sys-fs/ntfs3g', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-libs/gpm', 'sys-power/acpid', 'www-client/links', 'app-misc/livecd-tools']) exited 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1416, in run
    getattr(self, x)()
  File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1519, in build_packages
    "build aborting due to error.")
catalyst.support.CatalystError: livecdbuild aborting due to error.
04 Mar 2017 19:40:43 UTC: NOTICE  : Cleaning up... Running unbind()
Command exited with non-zero status 2
4331.00user 681.44system 1:05:54elapsed 126%CPU (0avgtext+0avgdata 814888maxresident)k
55801inputs+16720673outputs (171major+536729634minor)pagefaults 0swaps



Full build log at /home/release/tmp/run/catalyst-auto.20170304.3mvH9C/log/installcd-stage1.log