1 |
Marko McLion wrote: |
2 |
> Dne torek 20. januarja 2004 16:03 je Andrea Ferraris napisal(a): |
3 |
> |
4 |
> |
5 |
> |
6 |
>>>processor : 0 |
7 |
>>>model name : AMD Athlon(tm) MP 2800+ |
8 |
>>>bogomips : 4194.30 |
9 |
>>> |
10 |
>>>processor : 1 |
11 |
>>>model name : AMD Athlon(tm) MP |
12 |
>>>bogomips : 4259.84 |
13 |
>>> |
14 |
>>>--------- |
15 |
>>>is possible that there is so much difference? Or is it a software |
16 |
>>>problem? |
17 |
>> |
18 |
>>Once upon a time, a smp kernel could run also on non smp machine. |
19 |
>>Can you try to take away one CPU, then test the machine, compiling |
20 |
>>the mysql sources, then if you get the same error, repeat with the other |
21 |
>>CPU in the other slot, taking away the one you tested before. |
22 |
>>Which is the strange gcc error that you get, compiling the mysql sources? |
23 |
>>Isnt' it a sig 11? In such case could be a memory problem. |
24 |
> |
25 |
> |
26 |
> I'm affraid this is not really possible at this time (the server is online and |
27 |
> on the other location of the country)... We have to figure out all the |
28 |
> possible errors that could cause this before we go there fixing the |
29 |
> machine... |
30 |
> |
31 |
> There is some more info: |
32 |
> |
33 |
> board |
34 |
> http://www.giga-byte.com/Server/Products/Products_ServerBoard_GA-7DPXDW-P.htm |
35 |
> Bios: |
36 |
> http://www.giga-byte.com/Server/Support/BIOS/BIOS_ServerBoard_GA-7DPXDW-P.htm |
37 |
> |
38 |
> |
39 |
> From the debug trace when GCC dies compiling (it displays the message |
40 |
> "internal compiler error... this is probably a hardware or OS problem"): |
41 |
> |
42 |
> 0x809c405 handle_segfault + 645 |
43 |
> 0x81a2885 __pthread_sighandler + 133 |
44 |
> 0x80ca114 _Z20get_best_combinationP4JOIN + 132 |
45 |
> 0x80c85e1_Z20make_join_statisticsP4JOINP13st_table_listP4ItemP16st_dynamic_array+ |
46 |
> 1601 |
47 |
> 0x80c6183_Z12mysql_selectP3THDP13st_table_listR4ListI4ItemEPS4_P8st_orderS9_S7_ |
48 |
> S9_mP13select_result + 1683 |
49 |
> 0x80c5ae7 _Z13handle_selectP3THDP6st_lexP13select_result + 167 |
50 |
> 0x80abc4e _Z21mysql_execute_commandv + 958 |
51 |
> 0x80b080f _Z11mysql_parseP3THDPcj + 223 |
52 |
> 0x80aa9ef _Z16dispatch_command19enum_server_commandP3THDPcj + 1343 |
53 |
> 0x80aa387 _Z10do_commandP3THD + 231 |
54 |
> 0x80a9a4d handle_one_connection + 1053 |
55 |
> 0x819e42d pthread_start_thread + 333 |
56 |
> 0x81dc43a clone + 106 |
57 |
|
58 |
Segfaults are caused by bad RAM or overheating a good portion of the time. Since your |
59 |
using gentoo-sources, try to emerge lm_sensors to check if the problem is heat related. |
60 |
|
61 |
-- |
62 |
Andrew Gaffney |
63 |
System Administrator |
64 |
Skyline Aeronautics, LLC. |
65 |
776 North Bell Avenue |
66 |
Chesterfield, MO 63005 |
67 |
636-357-1548 |