1 |
I updated my gentoo system. After emerging system and world, the system |
2 |
does not work with VLANs if the interfaces are configured via the |
3 |
net.eth0 script. However if I configure the interface manually it |
4 |
works. This worked before I updated. Any Ideas? |
5 |
|
6 |
The conf.d/net file is below. |
7 |
|
8 |
Thanks, |
9 |
Joe Rizzo |
10 |
|
11 |
|
12 |
# cat /etc/conf.d/net |
13 |
config_eth0=( |
14 |
"null" |
15 |
) |
16 |
|
17 |
vlans_eth0="16" |
18 |
|
19 |
config_eth0_16=( |
20 |
"10.8.16.16 broadcast 10.8.16.255 netmask 255.255.255.0" |
21 |
) |
22 |
|
23 |
routes_eth0_16=( |
24 |
"-net 0.0.0.0 netmask 0.0.0.0 gw 10.8.16.1" |
25 |
) |
26 |
|
27 |
# ip addr |
28 |
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue |
29 |
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 |
30 |
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo |
31 |
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 |
32 |
link/ether 00:50:45:5c:13:cc brd ff:ff:ff:ff:ff:ff |
33 |
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 |
34 |
link/ether 00:50:45:5c:13:cd brd ff:ff:ff:ff:ff:ff |
35 |
42: eth0.16: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue |
36 |
link/ether 00:50:45:5c:13:cc brd ff:ff:ff:ff:ff:ff |
37 |
inet 10.8.16.16/24 brd 10.8.16.255 scope global eth0.16 |
38 |
|
39 |
-- |
40 |
gentoo-server@g.o mailing list |