| 1 |
Warum setzt Du das vertRefresh nicht einfach hoch? Alternativ - wenn Du |
| 2 |
kde nutzt - kannst Du die Wiederholfrequenz in der Systemsteuerung |
| 3 |
einstellen. |
| 4 |
|
| 5 |
Ansonsten nimm den xorg-server-1.6.x, der braucht keine xorg.conf mehr |
| 6 |
und sucht sich die besten Parameter normalerweise selber. |
| 7 |
|
| 8 |
HTH |
| 9 |
|
| 10 |
Oliver |
| 11 |
|
| 12 |
|
| 13 |
|
| 14 |
Magnus Rosenbaum schrieb: |
| 15 |
> Hallo Leute, |
| 16 |
> |
| 17 |
> seit ich vor einiger Zeit den X-Server auf einem meiner Rechner |
| 18 |
> aktualisiert habe, läuft dieser nur noch mit 60 Hz Bildwiederholfrequenz. |
| 19 |
> An dem Rechner hängen 2 Röhrenmonitore. |
| 20 |
> |
| 21 |
> Ich habe versucht, in xorg.conf eine Modeline vorzugeben, aber dann stürzt |
| 22 |
> der X-Server gleich beim Starten ab: |
| 23 |
> |
| 24 |
> ---8<--- |
| 25 |
> |
| 26 |
> (II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so |
| 27 |
> (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." |
| 28 |
> compiled for 1.4.99.906, module version = 8.55.2 |
| 29 |
> ABI class: X.Org Server Extension, version 1.1 |
| 30 |
> (II) fglrx(0): Using adapter: 1:0.0. |
| 31 |
> (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) |
| 32 |
> (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR SGRAM / SDRAM |
| 33 |
> (II) fglrx(0): PCIE card detected |
| 34 |
> (II) fglrx(0): board/chipset is supported by this driver (original ATI board) |
| 35 |
> (II) Loading sub module "ddc" |
| 36 |
> (II) LoadModule: "ddc" |
| 37 |
> (II) Module "ddc" already built-in |
| 38 |
> (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000011, |
| 39 |
> disabled=0x00000000 |
| 40 |
> (II) fglrx(0): Connected Display1: CRT on primary DAC [crt1] |
| 41 |
> (II) fglrx(0): Display1 EDID data --------------------------- |
| 42 |
> (II) fglrx(0): Manufacturer: SNY Model: 390 Serial#: 16843009 |
| 43 |
> (II) fglrx(0): Year: 2000 Week: 21 |
| 44 |
> (II) fglrx(0): EDID Version: 1.2 |
| 45 |
> (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V |
| 46 |
> (II) fglrx(0): Sync: Separate Composite SyncOnGreen |
| 47 |
> (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 27 |
| 48 |
> (II) fglrx(0): Gamma: 2.50 |
| 49 |
> (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display |
| 50 |
> (II) fglrx(0): First detailed timing is preferred mode |
| 51 |
> (II) fglrx(0): GTF timings supported |
| 52 |
> (II) fglrx(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605 |
| 53 |
> (II) fglrx(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 |
| 54 |
> (II) fglrx(0): Supported VESA Video Modes: |
| 55 |
> (II) fglrx(0): 720x400@70Hz |
| 56 |
> (II) fglrx(0): 720x400@88Hz |
| 57 |
> (II) fglrx(0): 640x480@60Hz |
| 58 |
> (II) fglrx(0): 640x480@67Hz |
| 59 |
> (II) fglrx(0): 640x480@72Hz |
| 60 |
> (II) fglrx(0): 640x480@75Hz |
| 61 |
> (II) fglrx(0): 800x600@56Hz |
| 62 |
> (II) fglrx(0): 800x600@60Hz |
| 63 |
> (II) fglrx(0): 800x600@72Hz |
| 64 |
> (II) fglrx(0): 800x600@75Hz |
| 65 |
> (II) fglrx(0): 832x624@75Hz |
| 66 |
> (II) fglrx(0): 1024x768@87Hz (interlaced) |
| 67 |
> (II) fglrx(0): 1024x768@60Hz |
| 68 |
> (II) fglrx(0): 1024x768@70Hz |
| 69 |
> (II) fglrx(0): 1024x768@75Hz |
| 70 |
> (II) fglrx(0): 1280x1024@75Hz |
| 71 |
> (II) fglrx(0): 1152x870@75Hz |
| 72 |
> (II) fglrx(0): Manufacturer's mask: 0 |
| 73 |
> (II) fglrx(0): Supported Future Video Modes: |
| 74 |
> (II) fglrx(0): #0: hsize: 1800 vsize 1440 refresh: 60 vid: 32962 |
| 75 |
> (II) fglrx(0): #1: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 |
| 76 |
> (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 85 vid: 22913 |
| 77 |
> (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 75 vid: 20353 |
| 78 |
> (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 85 vid: 22897 |
| 79 |
> (II) fglrx(0): #5: hsize: 1024 vsize 768 refresh: 85 vid: 22881 |
| 80 |
> (II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 85 vid: 22853 |
| 81 |
> (II) fglrx(0): #7: hsize: 640 vsize 480 refresh: 85 vid: 22833 |
| 82 |
> (II) fglrx(0): Supported additional Video Mode: |
| 83 |
> (II) fglrx(0): clock: 157.5 MHz Image Size: 352 x 264 mm |
| 84 |
> (II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end |
| 85 |
> 1728 h_border: 0 |
| 86 |
> (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: |
| 87 |
> 1072 v_border: 0 |
| 88 |
> (II) fglrx(0): Ranges: V min: 48 V max: 120 Hz, H min: 30 H max: 96 kHz, |
| 89 |
> PixClock max 300 MHz |
| 90 |
> (II) fglrx(0): Monitor name: CPD-E400E |
| 91 |
> (II) fglrx(0): Serial No: 6028977 |
| 92 |
> (II) fglrx(0): EDID (in hex): |
| 93 |
> (II) fglrx(0): 00ffffffffffff004dd9900301010101 |
| 94 |
> (II) fglrx(0): 150a01020e251b96eb0cc9a057479b27 |
| 95 |
> (II) fglrx(0): 12484cffff80c280a94f8159814f7159 |
| 96 |
> (II) fglrx(0): 615945593159863d00c05100304040a0 |
| 97 |
> (II) fglrx(0): 130060081100001e000000fd0030781e |
| 98 |
> (II) fglrx(0): 601e000a202020202020000000fc0043 |
| 99 |
> (II) fglrx(0): 50442d45343030450a202020000000ff |
| 100 |
> (II) fglrx(0): 00363032383937370a2020202020004e |
| 101 |
> (II) fglrx(0): End of Display1 EDID data -------------------- |
| 102 |
> (II) fglrx(0): Connected Display2: CRT on secondary DAC [crt2] |
| 103 |
> (II) fglrx(0): Display2: No EDID information from DDC. |
| 104 |
> (EE) fglrx(0): Unknown EDID version 0 |
| 105 |
> (II) fglrx(0): Display2: Failed to get EDID information. |
| 106 |
> (II) fglrx(0): Primary Controller - CRT on primary DAC |
| 107 |
> (II) fglrx(0): Secondary Controller - CRT on secondary DAC |
| 108 |
> (II) fglrx(0): Internal Desktop Setting: 0x00000001 |
| 109 |
> (II) fglrx(0): POWERplay version 3. 1 power state available: |
| 110 |
> (II) fglrx(0): 1. 398/203MHz @ 50Hz [enable load balancing] |
| 111 |
> |
| 112 |
> Backtrace: |
| 113 |
> 0: /usr/bin/X(xorg_backtrace+0x26) [0x4e7e36] |
| 114 |
> 1: /usr/bin/X(xf86SigHandler+0x39) [0x490799] |
| 115 |
> 2: /lib/libc.so.6 [0x7f9b82b41290] |
| 116 |
> |
| 117 |
> Fatal server error: |
| 118 |
> Caught signal 11. Server aborting |
| 119 |
> |
| 120 |
> ---8<--- |
| 121 |
> |
| 122 |
> Hier die xorg.conf: |
| 123 |
> |
| 124 |
> ---8<--- |
| 125 |
> |
| 126 |
> Section "ServerLayout" |
| 127 |
> Identifier "Simple Layout" |
| 128 |
> Screen 0 "ScreenLeft" 0 0 |
| 129 |
> Screen 1 "ScreenRight" RightOf "ScreenLeft" |
| 130 |
> Option "Xinerama" "on" |
| 131 |
> InputDevice "Mouse" "CorePointer" |
| 132 |
> InputDevice "Keyboard" "CoreKeyboard" |
| 133 |
> EndSection |
| 134 |
> |
| 135 |
> Section "ServerFlags" |
| 136 |
> Option "AIGLX" "off" |
| 137 |
> Option "Xinerama" "true" |
| 138 |
> EndSection |
| 139 |
> |
| 140 |
> Section "Module" |
| 141 |
> Load "glx" |
| 142 |
> Load "dri" |
| 143 |
> Load "dbe" # Double buffer extension |
| 144 |
> SubSection "extmod" |
| 145 |
> # don't initialise the DGA extension |
| 146 |
> Option "omit xfree86-dga" |
| 147 |
> EndSubSection |
| 148 |
> Load "freetype" |
| 149 |
> EndSection |
| 150 |
> |
| 151 |
> Section "Files" |
| 152 |
> FontPath "/usr/share/fonts/misc/" |
| 153 |
> FontPath "/usr/share/fonts/Type1/" |
| 154 |
> FontPath "/usr/share/fonts/100dpi/" |
| 155 |
> FontPath "/usr/share/fonts/75dpi/" |
| 156 |
> FontPath "/usr/local/share/fonts/" |
| 157 |
> EndSection |
| 158 |
> |
| 159 |
> Section "InputDevice" |
| 160 |
> Identifier "Keyboard" |
| 161 |
> Driver "kbd" |
| 162 |
> Option "AutoRepeat" "500 30" |
| 163 |
> Option "XkbRules" "xorg" |
| 164 |
> Option "XkbModel" "pc105" |
| 165 |
> Option "XkbLayout" "de" |
| 166 |
> Option "XkbVariant" "nodeadkeys" |
| 167 |
> EndSection |
| 168 |
> |
| 169 |
> Section "InputDevice" |
| 170 |
> Identifier "Mouse" |
| 171 |
> Driver "mouse" |
| 172 |
> Option "Protocol" "Auto" # Auto detect |
| 173 |
> Option "Device" "/dev/input/mice" |
| 174 |
> Option "ZAxisMapping" "4 5 6 7" |
| 175 |
> EndSection |
| 176 |
> |
| 177 |
> Section "Monitor" |
| 178 |
> Identifier "Monitor1" |
| 179 |
> VendorName "SONY" |
| 180 |
> ModelName "CPD-E400E" |
| 181 |
> DisplaySize 365 275 |
| 182 |
> HorizSync 30.0 - 96.0 |
| 183 |
> VertRefresh 48.0 - 120.0 |
| 184 |
> Option "DPMS" "true" |
| 185 |
> UseModes "Modes" |
| 186 |
> EndSection |
| 187 |
> |
| 188 |
> Section "Monitor" |
| 189 |
> Identifier "Monitor2" |
| 190 |
> VendorName "SONY" |
| 191 |
> ModelName "CPD-E400E" |
| 192 |
> DisplaySize 365 275 |
| 193 |
> HorizSync 30.0 - 96.0 |
| 194 |
> VertRefresh 48.0 - 120.0 |
| 195 |
> Option "DPMS" "true" |
| 196 |
> UseModes "Modes" |
| 197 |
> EndSection |
| 198 |
> |
| 199 |
> Section "Modes" |
| 200 |
> Identifier "Modes" |
| 201 |
> ModeLine "1280x960" 165.88 1280 1336 1616 1728 960 962 974 |
| 202 |
> 1000 # 96Hz |
| 203 |
> EndSection |
| 204 |
> |
| 205 |
> Section "Device" |
| 206 |
> Identifier "ATI Technologies Inc RV380 [Radeon X600 (PCIE)] VGA" |
| 207 |
> Driver "fglrx" |
| 208 |
> BusID "PCI:1:0:0" |
| 209 |
> Screen 0 |
| 210 |
> EndSection |
| 211 |
> |
| 212 |
> Section "Device" |
| 213 |
> Identifier "ATI Technologies Inc RV380 [Radeon X600 (PCIE)] DVI" |
| 214 |
> Driver "fglrx" |
| 215 |
> BusID "PCI:1:0:0" |
| 216 |
> Screen 1 |
| 217 |
> EndSection |
| 218 |
> |
| 219 |
> Section "Screen" |
| 220 |
> Identifier "ScreenLeft" |
| 221 |
> Device "ATI Technologies Inc RV380 [Radeon X600 (PCIE)] VGA" |
| 222 |
> Monitor "Monitor1" |
| 223 |
> DefaultDepth 24 |
| 224 |
> SubSection "Display" |
| 225 |
> Viewport 0 0 |
| 226 |
> Depth 8 |
| 227 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 228 |
> "768x576" "640x480" |
| 229 |
> EndSubSection |
| 230 |
> SubSection "Display" |
| 231 |
> Viewport 0 0 |
| 232 |
> Depth 16 |
| 233 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 234 |
> "768x576" "640x480" |
| 235 |
> EndSubSection |
| 236 |
> SubSection "Display" |
| 237 |
> Viewport 0 0 |
| 238 |
> Depth 24 |
| 239 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 240 |
> "768x576" "640x480" |
| 241 |
> EndSubSection |
| 242 |
> SubSection "Display" |
| 243 |
> Viewport 0 0 |
| 244 |
> Depth 32 |
| 245 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 246 |
> "768x576" "640x480" |
| 247 |
> EndSubSection |
| 248 |
> EndSection |
| 249 |
> |
| 250 |
> Section "Screen" |
| 251 |
> Identifier "ScreenRight" |
| 252 |
> Device "ATI Technologies Inc RV380 [Radeon X600 (PCIE)] DVI" |
| 253 |
> Monitor "Monitor2" |
| 254 |
> DefaultDepth 24 |
| 255 |
> SubSection "Display" |
| 256 |
> Viewport 0 0 |
| 257 |
> Depth 8 |
| 258 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 259 |
> "768x576" "640x480" |
| 260 |
> EndSubSection |
| 261 |
> SubSection "Display" |
| 262 |
> Viewport 0 0 |
| 263 |
> Depth 16 |
| 264 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 265 |
> "768x576" "640x480" |
| 266 |
> EndSubSection |
| 267 |
> SubSection "Display" |
| 268 |
> Viewport 0 0 |
| 269 |
> Depth 24 |
| 270 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 271 |
> "768x576" "640x480" |
| 272 |
> EndSubSection |
| 273 |
> SubSection "Display" |
| 274 |
> Viewport 0 0 |
| 275 |
> Depth 32 |
| 276 |
> Modes "1280x960" "1152x864" "1024x768" "800x600" |
| 277 |
> "768x576" "640x480" |
| 278 |
> EndSubSection |
| 279 |
> EndSection |
| 280 |
> |
| 281 |
> Section "DRI" |
| 282 |
> Mode 0666 |
| 283 |
> EndSection |
| 284 |
> |
| 285 |
> ---8<--- |
| 286 |
> |
| 287 |
> Hat jemand ne Idee, was da los sein könnte? |
| 288 |
> |
| 289 |
> Ciao, Magnus |
| 290 |
> |
| 291 |
> |
Archives