1 |
Hallo Liste |
2 |
|
3 |
Ich habe nach wie vor noch das Problem mit meinen Festplatten und CDROM |
4 |
Laufwerken, die ich nicht alle miteinander benutzen kann. Nun mit bios |
5 |
Einstellungen, die alle Geräte erkennen lässt, funktioniert es ohne Probleme |
6 |
mit knoppix. Mit jener Einstellugn wäre auch die SATA Boot und root |
7 |
Festplatte das erste Device und somit habe ich keine Probleme mit dem Booten. |
8 |
|
9 |
Nun wie gesagt, mit konppix gehts. Zuerst erkennt er de Chip ICH5 und dann |
10 |
kommen die normalen Festplatten und CDROM Laufwerke von /dev/hda - hdd. Die |
11 |
SATA Platte ist unter /dev/sda zu finden. Also alles wunderbar. |
12 |
|
13 |
Aber warum ist dies mit meinem Kernel nicht möglich? Ist der Kernel von |
14 |
knoppix ein spezieller? Oder sind das, so wie vermute Boot Optionen die es |
15 |
ausmachen, dass Knoppix alles erkennt? Wenn ja, wo finde ich diese, wer hat |
16 |
nen Tipp? |
17 |
|
18 |
Knoppix Version 3.6 mit kernel 2.6 geboot. Hab dann noch nen dmesg gemacht |
19 |
und die config vom Kernel aus /usr/src/linux/.config kopiert. Hänge das noch |
20 |
an. |
21 |
|
22 |
Vielen Dank für die Hilfe |
23 |
|
24 |
dmesg von knoppix kernel: |
25 |
|
26 |
Found PnP BIOS installation structure at 0xc00f75e0 |
27 |
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x63cf, dseg 0xf0000 |
28 |
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver |
29 |
SCSI subsystem initialized |
30 |
00:00:1f[A] -> 2-18 -> IRQ 18 level low |
31 |
00:00:1f[B] -> 2-17 -> IRQ 17 level low |
32 |
00:00:1d[A] -> 2-16 -> IRQ 16 level low |
33 |
00:00:1d[B] -> 2-19 -> IRQ 19 level low |
34 |
00:00:1d[D] -> 2-23 -> IRQ 23 level low |
35 |
00:02:08[A] -> 2-20 -> IRQ 20 level low |
36 |
number of MP IRQ sources: 15. |
37 |
number of IO-APIC #2 registers: 24. |
38 |
testing the IO APIC....................... |
39 |
IO APIC #2...... |
40 |
.... register #00: 02000000 |
41 |
....... : physical APIC id: 02 |
42 |
....... : Delivery Type: 0 |
43 |
....... : LTS : 0 |
44 |
.... register #01: 00178020 |
45 |
....... : max redirection entries: 0017 |
46 |
....... : PRQ implemented: 1 |
47 |
....... : IO APIC version: 0020 |
48 |
.... IRQ redirection table: |
49 |
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: |
50 |
00 000 00 1 0 0 0 0 0 0 00 |
51 |
01 001 01 0 0 0 0 0 1 1 39 |
52 |
02 001 01 0 0 0 0 0 1 1 31 |
53 |
03 001 01 0 0 0 0 0 1 1 41 |
54 |
04 001 01 0 0 0 0 0 1 1 49 |
55 |
05 001 01 0 0 0 0 0 1 1 51 |
56 |
06 001 01 0 0 0 0 0 1 1 59 |
57 |
07 001 01 0 0 0 0 0 1 1 61 |
58 |
08 001 01 0 0 0 0 0 1 1 69 |
59 |
09 001 01 0 1 0 0 0 1 1 71 |
60 |
0a 001 01 0 0 0 0 0 1 1 79 |
61 |
0b 001 01 0 0 0 0 0 1 1 81 |
62 |
0c 001 01 0 0 0 0 0 1 1 89 |
63 |
0d 001 01 0 0 0 0 0 1 1 91 |
64 |
0e 001 01 0 0 0 0 0 1 1 99 |
65 |
0f 001 01 0 0 0 0 0 1 1 A1 |
66 |
10 001 01 1 1 0 1 0 1 1 B9 |
67 |
11 001 01 1 1 0 1 0 1 1 B1 |
68 |
12 001 01 1 1 0 1 0 1 1 A9 |
69 |
13 001 01 1 1 0 1 0 1 1 C1 |
70 |
14 001 01 1 1 0 1 0 1 1 D1 |
71 |
15 000 00 1 0 0 0 0 0 0 00 |
72 |
16 000 00 1 0 0 0 0 0 0 00 |
73 |
17 001 01 1 1 0 1 0 1 1 C9 |
74 |
IRQ to pin mappings: |
75 |
IRQ0 -> 0:2 |
76 |
IRQ1 -> 0:1 |
77 |
IRQ3 -> 0:3 |
78 |
IRQ4 -> 0:4 |
79 |
IRQ5 -> 0:5 |
80 |
IRQ6 -> 0:6 |
81 |
IRQ7 -> 0:7 |
82 |
IRQ8 -> 0:8 |
83 |
IRQ9 -> 0:9 |
84 |
IRQ10 -> 0:10 |
85 |
IRQ11 -> 0:11 |
86 |
IRQ12 -> 0:12 |
87 |
IRQ13 -> 0:13 |
88 |
IRQ14 -> 0:14 |
89 |
IRQ15 -> 0:15 |
90 |
IRQ16 -> 0:16 |
91 |
IRQ17 -> 0:17 |
92 |
IRQ18 -> 0:18 |
93 |
IRQ19 -> 0:19 |
94 |
IRQ20 -> 0:20 |
95 |
IRQ23 -> 0:23 |
96 |
.................................... done. |
97 |
PCI: Using ACPI for IRQ routing |
98 |
vesafb: framebuffer at 0xe0000000, mapped to 0xf8807000, size 3072k |
99 |
vesafb: mode is 1024x768x16, linelength=2048, pages=1 |
100 |
vesafb: protected mode interface info at c000:dcd0 |
101 |
vesafb: scrolling: redraw |
102 |
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 |
103 |
fb0: VESA VGA frame buffer device |
104 |
audit: initializing netlink socket (disabled) |
105 |
audit(1098451518.4294966424:0): initialized |
106 |
highmem bounce pool size: 64 pages |
107 |
Total HugeTLB memory allocated, 0 |
108 |
VFS: Disk quotas dquot_6.5.1 |
109 |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
110 |
SELinux: Registering netfilter hooks |
111 |
Initializing Cryptographic API |
112 |
isapnp: Scanning for PnP cards... |
113 |
isapnp: No Plug & Play device found |
114 |
Console: switching to colour frame buffer device 128x48 |
115 |
Using anticipatory io scheduler |
116 |
Floppy drive(s): fd0 is 1.44M |
117 |
FDC 0 is a post-1991 82077 |
118 |
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize |
119 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
120 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
121 |
ICH5: IDE controller at PCI slot 0000:00:1f.1 |
122 |
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) |
123 |
ICH5: chipset revision 2 |
124 |
ICH5: 100% native mode on irq 18 |
125 |
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA |
126 |
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA |
127 |
hda: MAXTOR 6L060J3, ATA DISK drive |
128 |
hdb: Maxtor 53073U6, ATA DISK drive |
129 |
ide0 at 0xec00-0xec07,0xe802 on irq 18 |
130 |
hdc: LITE-ON DVDRW SOHW-1213S, ATAPI CD/DVD-ROM drive |
131 |
hdd: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive |
132 |
ide1 at 0xe400-0xe407,0xe002 on irq 18 |
133 |
hda: max request size: 128KiB |
134 |
hda: 117266688 sectors (60040 MB) w/1819KiB Cache, CHS=65535/16/63 |
135 |
hda: hda1 hda2 < hda5 hda6 hda7 > |
136 |
hdb: max request size: 128KiB |
137 |
hdb: 59772900 sectors (30603 MB) w/2048KiB Cache, CHS=59298/16/63 |
138 |
hdb: hdb1 hdb2 < hdb5 > |
139 |
libata version 1.02 loaded. |
140 |
ata_piix version 1.02 |
141 |
PCI: Setting latency timer of device 0000:00:1f.2 to 64 |
142 |
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 |
143 |
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c68 86:3c01 87:4003 |
144 |
88:20ff |
145 |
ata1: dev 0 ATA, max UDMA7, 156368016 sectors: lba48 |
146 |
ata1: dev 0 configured for UDMA/133 |
147 |
scsi0 : ata_piix |
148 |
Vendor: ATA Model: SAMSUNG SP0812C Rev: SU10 |
149 |
Type: Direct-Access ANSI SCSI revision: 05 |
150 |
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 |
151 |
ATA: abnormal status 0x7F on port 0x177 |
152 |
scsi1 : ata_piix |
153 |
SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) |
154 |
SCSI device sda: drive cache: write back |
155 |
sda: sda1 sda2 sda3 sda4 |
156 |
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
157 |
mice: PS/2 mouse device common for all mice |
158 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
159 |
irq 18: nobody cared! |
160 |
[<c01082da>] __report_bad_irq+0x22/0x74 |
161 |
[<c0108390>] note_interrupt+0x4c/0x78 |
162 |
[<c010865c>] do_IRQ+0x14c/0x17c |
163 |
[<c0106d68>] common_interrupt+0x18/0x20 |
164 |
[<c011115c>] delay_pmtmr+0x10/0x18 |
165 |
[<c01c40a0>] __delay+0xc/0x10 |
166 |
[<c025d58e>] psmouse_sendbyte+0x4a/0x88 |
167 |
[<c025d71b>] psmouse_command+0x14f/0x188 |
168 |
[<c025e389>] ps2pp_init+0x25/0x238 |
169 |
[<c025da0a>] psmouse_extensions+0xde/0x188 |
170 |
[<c025dde9>] psmouse_connect+0xe9/0x224 |
171 |
[<c025f444>] serio_find_dev+0x4c/0x50 |
172 |
[<c025f7d2>] serio_register_port+0x1e/0x30 |
173 |
[<c03cf869>] i8042_port_register+0x45/0x64 |
174 |
[<c03cfa7b>] i8042_init+0x15f/0x168 |
175 |
[<c03b484b>] do_initcalls+0x27/0xa4 |
176 |
[<c01004dc>] init+0xe8/0x234 |
177 |
[<c01003f4>] init+0x0/0x234 |
178 |
[<c0104221>] kernel_thread_helper+0x5/0xc |
179 |
|
180 |
handlers: |
181 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
182 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
183 |
Disabling IRQ #18 |
184 |
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 |
185 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
186 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
187 |
EISA: Probing bus 0 at eisa0 |
188 |
EISA: Detected 0 cards. |
189 |
NET: Registered protocol family 2 |
190 |
IP: routing cache hash table of 8192 buckets, 64Kbytes |
191 |
TCP: Hash tables configured (established 262144 bind 65536) |
192 |
NET: Registered protocol family 1 |
193 |
NET: Registered protocol family 15 |
194 |
PM: Reading pmdisk image. |
195 |
PM: Resume from disk failed. |
196 |
ACPI: (supports S0 S1 S4 S5) |
197 |
RAMDISK: Compressed image found at block 0 |
198 |
VFS: Mounted root (ext2 filesystem). |
199 |
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as |
200 |
device |
201 |
scsi2 : SCSI host adapter emulation for IDE ATAPI devices |
202 |
Vendor: LITE-ON Model: DVDRW SOHW-1213S Rev: TS05 |
203 |
Type: CD-ROM ANSI SCSI revision: 02 |
204 |
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray |
205 |
Uniform CD-ROM driver Revision: 3.20 |
206 |
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0 |
207 |
scsi3 : SCSI host adapter emulation for IDE ATAPI devices |
208 |
Vendor: TSSTcorp Model: DVD-ROM TS-H352A Rev: TS01 |
209 |
Type: CD-ROM ANSI SCSI revision: 02 |
210 |
sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray |
211 |
Attached scsi CD-ROM sr1 at scsi3, channel 0, id 0, lun 0 |
212 |
NCR53c406a: no available ports found |
213 |
mptscsih: Unknown symbol mpt_deregister |
214 |
mptscsih: Unknown symbol mpt_reset_deregister |
215 |
mptscsih: Unknown symbol mpt_config |
216 |
mptscsih: Unknown symbol mpt_device_driver_deregister |
217 |
mptscsih: Unknown symbol mpt_free_msg_frame |
218 |
mptscsih: Unknown symbol mpt_print_ioc_summary |
219 |
mptscsih: Unknown symbol mpt_GetIocState |
220 |
mptscsih: Unknown symbol mpt_put_msg_frame |
221 |
mptscsih: Unknown symbol mpt_register |
222 |
mptscsih: Unknown symbol mpt_add_sge |
223 |
mptscsih: Unknown symbol mpt_event_deregister |
224 |
mptscsih: Unknown symbol mpt_adapter_find_next |
225 |
mptscsih: Unknown symbol mpt_read_ioc_pg_3 |
226 |
mptscsih: Unknown symbol mpt_event_register |
227 |
mptscsih: Unknown symbol mpt_send_handshake_request |
228 |
mptscsih: Unknown symbol mpt_device_driver_register |
229 |
mptscsih: Unknown symbol DmpService |
230 |
mptscsih: Unknown symbol mpt_ASCQ_TableSz |
231 |
mptscsih: Unknown symbol mpt_v_ASCQ_TablePtr |
232 |
mptscsih: Unknown symbol mpt_get_msg_frame |
233 |
mptscsih: Unknown symbol mpt_ScsiOpcodesPtr |
234 |
mptscsih: Unknown symbol mpt_reset_register |
235 |
mptscsih: Unknown symbol mpt_HardResetHandler |
236 |
mptscsih: Unknown symbol mpt_adapter_find_first |
237 |
scsi: <fdomain> Detection failed (no card) |
238 |
GDT-HA: Storage RAID Controller Driver. Version: 3.04 |
239 |
GDT-HA: Found 0 PCI Storage RAID Controllers |
240 |
seagate: ST0x/TMC-8xx not detected. |
241 |
DC390: 0 adapters found |
242 |
Failed initialization of WD-7000 SCSI card! |
243 |
usbcore: registered new driver usbfs |
244 |
usbcore: registered new driver hub |
245 |
uhci_hcd: version magic '2.6.6 SMP preempt 386 gcc-2.95' should be '2.6.7 SMP |
246 |
preempt 386 gcc-3.3' |
247 |
ohci_hcd: version magic '2.6.6 SMP preempt 386 gcc-2.95' should be '2.6.7 SMP |
248 |
preempt 386 gcc-3.3' |
249 |
ieee1394: Initialized config rom entry `ip1394' |
250 |
sbp2: Unknown parameter `sbp2_serialize_io' |
251 |
sbp2: $Rev: 1219 $ Ben Collins <bcollins@××××××.org> |
252 |
irq 18: nobody cared! |
253 |
[<c01082da>] __report_bad_irq+0x22/0x74 |
254 |
[<c0108390>] note_interrupt+0x4c/0x78 |
255 |
[<c010865c>] do_IRQ+0x14c/0x17c |
256 |
[<c0106d68>] common_interrupt+0x18/0x20 |
257 |
[<c01040f7>] mwait_idle+0x33/0x4c |
258 |
[<c01040b1>] cpu_idle+0x2d/0x40 |
259 |
[<c03b47cf>] start_kernel+0x1a3/0x1e8 |
260 |
|
261 |
handlers: |
262 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
263 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
264 |
Disabling IRQ #18 |
265 |
ISO 9660 Extensions: Microsoft Joliet Level 3 |
266 |
ISO 9660 Extensions: RRIP_1991A |
267 |
cloop: Initializing cloop v2.01 |
268 |
cloop: loaded (max 8 devices) |
269 |
cloop: /cdrom/KNOPPIX/KNOPPIX: 30369 blocks, 65536 bytes/block, largest block |
270 |
is 65552 bytes. |
271 |
ISO 9660 Extensions: RRIP_1991A |
272 |
Freeing unused kernel memory: 264k freed |
273 |
Real Time Clock Driver v1.12 |
274 |
ACPI: Power Button (FF) [PWRF] |
275 |
ACPI: Processor [CPU1] (supports C1, 8 throttling states) |
276 |
Linux Kernel Card Services |
277 |
options: [pci] [cardbus] [pm] |
278 |
USB Universal Host Controller Interface driver v2.2 |
279 |
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 |
280 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
281 |
uhci_hcd 0000:00:1d.0: irq 16, io base 0000cc00 |
282 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 |
283 |
hub 1-0:1.0: USB hub found |
284 |
hub 1-0:1.0: 2 ports detected |
285 |
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 |
286 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
287 |
uhci_hcd 0000:00:1d.1: irq 19, io base 0000d000 |
288 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 |
289 |
hub 2-0:1.0: USB hub found |
290 |
hub 2-0:1.0: 2 ports detected |
291 |
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 |
292 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
293 |
uhci_hcd 0000:00:1d.2: irq 18, io base 0000d400 |
294 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 |
295 |
hub 3-0:1.0: USB hub found |
296 |
hub 3-0:1.0: 2 ports detected |
297 |
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 |
298 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
299 |
uhci_hcd 0000:00:1d.3: irq 16, io base 0000d800 |
300 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 |
301 |
hub 4-0:1.0: USB hub found |
302 |
hub 4-0:1.0: 2 ports detected |
303 |
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
304 |
ohci_hcd: block sizes: ed 64 td 64 |
305 |
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled |
306 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
307 |
parport: PnPBIOS parport detected. |
308 |
parport0: PC-style at 0x378, irq 7 [PCSPP] |
309 |
Linux agpgart interface v0.100 (c) Dave Jones |
310 |
agpgart: Detected an Intel 865 Chipset. |
311 |
agpgart: Maximum main memory to use for agp memory: 941M |
312 |
agpgart: AGP aperture is 64M @ 0xf8000000 |
313 |
hw_random: RNG not detected |
314 |
gameport: pci0000:02:02.1 speed 994 kHz |
315 |
Linux video capture interface: v1.00 |
316 |
bttv: driver version 0.9.14 loaded |
317 |
bttv: using 8 buffers with 2080k (520 pages) each for capture |
318 |
bttv: Bt8xx card found (0). |
319 |
bttv0: Bt878 (rev 17) at 0000:02:03.0, irq: 19, latency: 32, mmio: 0xf7efe000 |
320 |
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb |
321 |
bttv0: using: Hauppauge (bt878) [card=10,autodetected] |
322 |
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] |
323 |
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] |
324 |
bttv0: Hauppauge eeprom: model=38104, tuner=Philips FI1216 MK2 (5), radio=no |
325 |
bttv0: using tuner=5 |
326 |
bttv0: i2c: checking for MSP34xx @ 0x80... not found |
327 |
bttv0: i2c: checking for TDA9875 @ 0xb0... not found |
328 |
bttv0: i2c: checking for TDA7432 @ 0x8a... not found |
329 |
tvaudio: TV audio decoder + audio/video mux driver |
330 |
tvaudio: known chips: |
331 |
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 |
332 |
(PV951),ta8874z |
333 |
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] |
334 |
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 |
335 |
[sw] |
336 |
bttv0: registered device video0 |
337 |
bttv0: registered device vbi0 |
338 |
bttv0: PLL: 28636363 => 35468950 .. ok |
339 |
8139too Fast Ethernet driver 0.9.27 |
340 |
eth0: RealTek RTL8139 at 0xf8cd3f00, 00:11:09:03:11:48, IRQ 23 |
341 |
eth0: Identified 8139 chip type 'RTL-8100B/8139D' |
342 |
Intel 810 + AC97 Audio, version 1.01, 04:02:19 Jul 28 2004 |
343 |
PCI: Setting latency timer of device 0000:00:1f.5 to 64 |
344 |
i810: Intel ICH5 found at IO 0xc400 and 0xc800, MEM 0xfebff600 and |
345 |
0xfebff500, IRQ 17 |
346 |
i810: Intel ICH5 mmio at 0xf8cd5600 and 0xf8cf0500 |
347 |
i810_audio: Primary codec has ID 2 |
348 |
i810_audio: Audio Controller supports 6 channels. |
349 |
i810_audio: Defaulting to base 2 channel mode. |
350 |
i810_audio: Resetting connection 0 |
351 |
i810_audio: Connection 0 with codec id 2 |
352 |
ac97_codec: AC97 codec, id: ALG96 (Unknown) |
353 |
i810_audio: only 48Khz playback available. |
354 |
i810_audio: AC'97 codec 2 Unable to map surround DAC's (or DAC's not |
355 |
present), total channels = 2 |
356 |
Creative EMU10K1 PCI Audio Driver, version 0.20a, 04:02:58 Jul 28 2004 |
357 |
emu10k1: EMU10K1 rev 10 model 0x8065 found, IO at 0xb800-0xb81f, IRQ 18 |
358 |
ac97_codec: AC97 Audio codec, id: EMC40 (Unknown) |
359 |
emu10k1: SBLive! 5.1 card detected |
360 |
irq 18: nobody cared! |
361 |
[<c01082da>] __report_bad_irq+0x22/0x74 |
362 |
[<c0108390>] note_interrupt+0x4c/0x78 |
363 |
[<c010865c>] do_IRQ+0x14c/0x17c |
364 |
[<c0106d68>] common_interrupt+0x18/0x20 |
365 |
[<c01c27ae>] __down_read+0x1a/0xcc |
366 |
[<c0118018>] do_page_fault+0x2d4/0x480 |
367 |
[<c0117f81>] do_page_fault+0x23d/0x480 |
368 |
[<f8b42983>] usb_hcd_irq+0x27/0x50 [usbcore] |
369 |
[<c010828f>] handle_IRQ_event+0x2f/0x58 |
370 |
[<c01085eb>] do_IRQ+0xdb/0x17c |
371 |
[<c0117d44>] do_page_fault+0x0/0x480 |
372 |
[<c0106e65>] error_code+0x2d/0x38 |
373 |
|
374 |
handlers: |
375 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
376 |
[<c022ce98>] (ide_intr+0x0/0x1c0) |
377 |
[<f8b4295c>] (usb_hcd_irq+0x0/0x50 [usbcore]) |
378 |
[<f8d51698>] (emu10k1_interrupt+0x0/0x128 [emu10k1]) |
379 |
Disabling IRQ #18 |
380 |
Adding 795176k swap on /dev/hda7. Priority:-1 extents:1 |
381 |
Adding 1004052k swap on /dev/sda2. Priority:-2 extents:1 |
382 |
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 |
383 |
NET: Registered protocol family 17 |
384 |
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) |
385 |
apm: overridden by ACPI. |
386 |
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x200000 |
387 |
ReiserFS: sda4: found reiserfs format "3.6" with standard journal |
388 |
ReiserFS: sda4: using ordered data mode |
389 |
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block |
390 |
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 |
391 |
ReiserFS: sda4: checking transaction log (sda4) |
392 |
ReiserFS: sda4: Using r5 hash to sort names |
393 |
ReiserFS: sda4: warning: Created .reiserfs_priv on sda4 - reserved for xattr |
394 |
storage. |
395 |
|
396 |
|
397 |
|
398 |
------------***************************************************************** |
399 |
*********------------- |
400 |
|
401 |
-- |
402 |
gentoo-user-de@g.o mailing list |