1 |
ich hab meinen Router mal auf 2,4GHz B+G umgestellt, vorher war 2,4GHz B+G+N. |
2 |
Nur kann ich den Router ständig sehen. |
3 |
|
4 |
soweit so gut, nun aber hab ich das Problem, das wenn ich mich dahin verbinden |
5 |
möchte (mit wicd), dann bekomme ich nach einiger Zeit "Kann keine IP beziehen" |
6 |
obwohl beim Router DHCP eignestellt ist. Über Kabel, geht das mit wicd |
7 |
ruckzuck. |
8 |
|
9 |
Oct 4 08:17:50 donbruno dhcpcd[10474]: eth0: sending signal 1 to pid 3778 |
10 |
Oct 4 08:17:50 donbruno dhcpcd[3778]: eth0: received SIGHUP, releasing lease |
11 |
Oct 4 08:17:50 donbruno dhcpcd[10474]: eth0: waiting for pid 3778 to exit |
12 |
Oct 4 08:17:50 donbruno ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 |
13 |
Mbps Full Duplex> |
14 |
Oct 4 08:17:50 donbruno ADDRCONF(NETDEV_UP): eth0: link is not ready |
15 |
Oct 4 08:17:50 donbruno ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
16 |
Oct 4 08:17:50 donbruno dhcpcd[10493]: wlan0: dhcpcd not running |
17 |
Oct 4 08:17:50 donbruno ADDRCONF(NETDEV_UP): wlan0: link is not ready |
18 |
Oct 4 08:17:52 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
19 |
Oct 4 08:17:52 donbruno wlan0: privacy configuration mismatch and mixed-cell |
20 |
disabled - disassociate |
21 |
Oct 4 08:17:57 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
22 |
Oct 4 08:17:57 donbruno wlan0: privacy configuration mismatch and mixed-cell |
23 |
disabled - disassociate |
24 |
Oct 4 08:18:00 donbruno eth0: no IPv6 routers present |
25 |
Oct 4 08:18:13 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
26 |
Oct 4 08:18:13 donbruno wlan0: privacy configuration mismatch and mixed-cell |
27 |
disabled - disassociate |
28 |
Oct 4 08:18:24 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
29 |
Oct 4 08:18:24 donbruno wlan0: privacy configuration mismatch and mixed-cell |
30 |
disabled - disassociate |
31 |
Oct 4 08:18:31 donbruno dhcpcd[11313]: wlan0: dhcpcd 4.0.13 starting |
32 |
Oct 4 08:18:31 donbruno dhcpcd[11313]: wlan0: waiting for carrier |
33 |
Oct 4 08:18:41 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
34 |
Oct 4 08:18:41 donbruno wlan0: privacy configuration mismatch and mixed-cell |
35 |
disabled - disassociate |
36 |
Oct 4 08:18:58 donbruno wlan0: direct probe to AP 00:00:00:00:00:00 try 1 |
37 |
Oct 4 08:18:58 donbruno wlan0: privacy configuration mismatch and mixed-cell |
38 |
disabled - disassociate |
39 |
Oct 4 08:19:01 donbruno dhcpcd[11313]: wlan0: timed out |
40 |
|
41 |
AP 00:00:00:00:00:00 hab ich geändert, steht sonst die MAC vom Router. |
42 |
|
43 |
|
44 |
-- |
45 |
Gruß |
46 |
Thomas |
47 |
--- |
48 |
CBUILD="x86_64-pc-linux-gnu" |
49 |
CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" |
50 |
CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" |
51 |
LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed" |