| 1 |
Am Freitag 18 Januar 2008 07:52:47 schrieb acid: |
| 2 |
> Hallo Erik, |
| 3 |
> |
| 4 |
> was zeigt dmesg denn an, nachdem du den Stick reingesteckt hast? ('dmesg |
| 5 |
> |
| 6 |
> | grep dvb') |
| 7 |
> |
| 8 |
> Wo besteht genau dein Problem? Vielleicht kannst du uns ja die Stelle in |
| 9 |
> dem HowTo sagen an der du nicht weiter kommt. |
| 10 |
|
| 11 |
Nachtrag: |
| 12 |
nach ein paar Experimenten bekomme ich nun folgende Ausgabe: |
| 13 |
bronco ~ # dmesg -c |
| 14 |
usb 1-2: new high speed USB device using ehci_hcd and address 6 |
| 15 |
usb 1-2: configuration #1 chosen from 1 choice |
| 16 |
em28xx new video device (2040:6502): interface 0, class 255 |
| 17 |
em28xx: device is attached to a USB 2.0 bus |
| 18 |
em28xx: you're using the experimental/unstable tree from mcentral.de |
| 19 |
em28xx: there's also a stable tree available but which is limited to |
| 20 |
em28xx: linux <=2.6.19.2 |
| 21 |
em28xx: it's fine to use this driver but keep in mind that it will move |
| 22 |
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's |
| 23 |
em28xx: proved to be stable |
| 24 |
em28xx #0: Alternate settings: 8 |
| 25 |
em28xx #0: Alternate setting 0, max size= 0 |
| 26 |
em28xx #0: Alternate setting 1, max size= 0 |
| 27 |
em28xx #0: Alternate setting 2, max size= 1448 |
| 28 |
em28xx #0: Alternate setting 3, max size= 2048 |
| 29 |
em28xx #0: Alternate setting 4, max size= 2304 |
| 30 |
em28xx #0: Alternate setting 5, max size= 2580 |
| 31 |
em28xx #0: Alternate setting 6, max size= 2892 |
| 32 |
em28xx #0: Alternate setting 7, max size= 3072 |
| 33 |
attach_inform: eeprom detected. |
| 34 |
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 |
| 35 |
em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 |
| 36 |
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 |
| 37 |
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 |
| 38 |
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 39 |
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 40 |
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 |
| 41 |
em28xx #0: i2c eeprom 70: 33 00 30 00 35 00 37 00 35 00 34 00 33 00 30 00 |
| 42 |
em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 |
| 43 |
em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 |
| 44 |
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 |
| 45 |
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 46 b3 |
| 46 |
em28xx #0: i2c eeprom c0: 3d f0 74 02 01 00 01 79 04 00 00 00 00 00 00 00 |
| 47 |
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 |
| 48 |
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 46 b3 |
| 49 |
em28xx #0: i2c eeprom f0: 3d f0 74 02 01 00 01 79 04 00 00 00 00 00 00 00 |
| 50 |
EEPROM ID= 0x9567eb1a |
| 51 |
Vendor/Product ID= 2040:6502 |
| 52 |
AC97 audio (5 sample rates) |
| 53 |
500mA max power |
| 54 |
Table at 0x24, strings=0x1e82, 0x186a, 0x0000 |
| 55 |
tveeprom 4-0050: Hauppauge model 65018, rev B3C0, serial# 4043590 |
| 56 |
tveeprom 4-0050: tuner model is Xceive XC3028 (idx 120, type 71) |
| 57 |
tveeprom 4-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital |
| 58 |
(eeprom 0xd4) |
| 59 |
tveeprom 4-0050: audio processor is None (idx 0) |
| 60 |
tveeprom 4-0050: has radio |
| 61 |
setting new tuner type now 71! |
| 62 |
tuner 4-0061: chip found @ 0xc2 (em28xx #0) |
| 63 |
attach inform (default): detected I2C address c2 |
| 64 |
/usr/src/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback |
| 65 |
tuner 0x61: Configuration acknowledged |
| 66 |
/usr/src/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback |
| 67 |
/usr/src/linuxtv/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! |
| 68 |
/usr/src/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner |
| 69 |
successfully loaded |
| 70 |
i2c-adapter i2c-4: FATAL: max6650_attach_adapter class HWMON not set |
| 71 |
attach_inform: tvp5150 detected. |
| 72 |
tvp5150 4-005c: tvp5150am1 detected. |
| 73 |
Loading base firmware: xc3028_init0.i2c.fw |
| 74 |
kobject_add failed for i2c-4 with -EEXIST, don't try to register things with |
| 75 |
the same name in the same directory. |
| 76 |
|
| 77 |
Call Trace: |
| 78 |
[<ffffffff802fe996>] kobject_shadow_add+0x156/0x18a |
| 79 |
[<ffffffff803668a1>] device_add+0x9f/0x534 |
| 80 |
[<ffffffff8036c5d9>] _request_firmware+0x14d/0x302 |
| 81 |
[<ffffffff889ff269>] :xc3028_tuner:xc3028_set_mode+0xcc/0x5ec |
| 82 |
[<ffffffff881c0da6>] :tuner:tuner_command+0xb55/0x1137 |
| 83 |
[<ffffffff889e0cae>] :em28xx:em28xx_read_reg_req+0x64/0xd0 |
| 84 |
[<ffffffff889df5aa>] :em28xx:em28xx_i2c_xfer+0x3db/0x4b4 |
| 85 |
[<ffffffff8810e1f0>] :i2c_core:i2c_transfer+0x47/0x53 |
| 86 |
[<ffffffff8810e27b>] :i2c_core:i2c_master_send+0x37/0x43 |
| 87 |
[<ffffffff88a0b1f4>] :tvp5150:tvp5150_command+0x1555/0x15c1 |
| 88 |
[<ffffffff88a09b65>] :tvp5150:tvp5150_detect_client+0x0/0x13a |
| 89 |
[<ffffffff8810fa00>] :i2c_core:i2c_clients_command+0x82/0xc0 |
| 90 |
[<ffffffff889da444>] :em28xx:em28xx_config_i2c+0x8e/0x94 |
| 91 |
[<ffffffff889daa6b>] :em28xx:em28xx_init_dev+0x1bc/0x6ed |
| 92 |
[<ffffffff889dc6a2>] :em28xx:em28xx_usb_probe+0x1547/0x159c |
| 93 |
[<ffffffff80336724>] bit_putcs+0x4d5/0x58b |
| 94 |
[<ffffffff80336f32>] soft_cursor+0x19a/0x1ac |
| 95 |
[<ffffffff80336cc4>] bit_cursor+0x4ea/0x506 |
| 96 |
[<ffffffff80225348>] update_curr+0xe6/0x10b |
| 97 |
[<ffffffff80336724>] bit_putcs+0x4d5/0x58b |
| 98 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 99 |
[<ffffffff80301400>] number+0x20/0x1f9 |
| 100 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 101 |
[<ffffffff80302183>] vsnprintf+0x525/0x569 |
| 102 |
[<ffffffff802fefcd>] add_uevent_var+0x7d/0xa4 |
| 103 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 104 |
[<ffffffff802fef00>] kobject_rename+0x9c/0xec |
| 105 |
[<ffffffff80225348>] update_curr+0xe6/0x10b |
| 106 |
[<ffffffff80300557>] rb_insert_color+0x61/0xda |
| 107 |
[<ffffffff802fdeb4>] ida_get_new_above+0xdc/0x16a |
| 108 |
[<ffffffff8029a224>] sysfs_addrm_finish+0x1d/0x1e1 |
| 109 |
[<ffffffff8027220e>] ifind+0xe/0x55 |
| 110 |
[<ffffffff8029b32d>] sysfs_create_link+0xea/0x141 |
| 111 |
[<ffffffff803f3ef5>] usb_match_one_id+0x26/0x82 |
| 112 |
[<ffffffff803f4b6b>] usb_probe_interface+0x89/0xb8 |
| 113 |
[<ffffffff8036886e>] driver_probe_device+0xd2/0x14e |
| 114 |
[<ffffffff803688ea>] __device_attach+0x0/0x5 |
| 115 |
[<ffffffff80367b83>] bus_for_each_drv+0x43/0x77 |
| 116 |
[<ffffffff80368979>] device_attach+0x67/0x7d |
| 117 |
[<ffffffff80367af2>] bus_attach_device+0x2a/0x78 |
| 118 |
[<ffffffff80366b02>] device_add+0x300/0x534 |
| 119 |
[<ffffffff803f35ed>] usb_set_configuration+0x45b/0x4b4 |
| 120 |
[<ffffffff803fa0b0>] generic_probe+0x15f/0x1f3 |
| 121 |
[<ffffffff8036886e>] driver_probe_device+0xd2/0x14e |
| 122 |
[<ffffffff803688ea>] __device_attach+0x0/0x5 |
| 123 |
[<ffffffff80367b83>] bus_for_each_drv+0x43/0x77 |
| 124 |
[<ffffffff80368979>] device_attach+0x67/0x7d |
| 125 |
[<ffffffff80367af2>] bus_attach_device+0x2a/0x78 |
| 126 |
[<ffffffff80366b02>] device_add+0x300/0x534 |
| 127 |
[<ffffffff803ef066>] usb_new_device+0xab/0xe4 |
| 128 |
[<ffffffff803efb96>] hub_thread+0x734/0xb0c |
| 129 |
[<ffffffff80238009>] autoremove_wake_function+0x0/0x2e |
| 130 |
[<ffffffff803ef462>] hub_thread+0x0/0xb0c |
| 131 |
[<ffffffff80237e36>] kthread+0x47/0x75 |
| 132 |
[<ffffffff8020bd88>] child_rip+0xa/0x12 |
| 133 |
[<ffffffff80237def>] kthread+0x0/0x75 |
| 134 |
[<ffffffff8020bd7e>] child_rip+0x0/0x12 |
| 135 |
|
| 136 |
fw_register_device: device_register failed |
| 137 |
xc3028-tuner.c: Unable to load firmware |
| 138 |
xc3028-tuner.c: ** PLEASE HAVE A LOOK AT ** |
| 139 |
xc3028-tuner.c: http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Firmware |
| 140 |
ANALOG TV REQUEST |
| 141 |
Loading base firmware: xc3028_init0.i2c.fw |
| 142 |
kobject_add failed for i2c-4 with -EEXIST, don't try to register things with |
| 143 |
the same name in the same directory. |
| 144 |
|
| 145 |
Call Trace: |
| 146 |
[<ffffffff802fe996>] kobject_shadow_add+0x156/0x18a |
| 147 |
[<ffffffff803668a1>] device_add+0x9f/0x534 |
| 148 |
[<ffffffff8036c5d9>] _request_firmware+0x14d/0x302 |
| 149 |
[<ffffffff889ff269>] :xc3028_tuner:xc3028_set_mode+0xcc/0x5ec |
| 150 |
[<ffffffff889ff803>] :xc3028_tuner:xc3028_tuner_set_params+0x7a/0x357 |
| 151 |
[<ffffffff881c0f19>] :tuner:tuner_command+0xcc8/0x1137 |
| 152 |
[<ffffffff889e0cae>] :em28xx:em28xx_read_reg_req+0x64/0xd0 |
| 153 |
[<ffffffff889df5aa>] :em28xx:em28xx_i2c_xfer+0x3db/0x4b4 |
| 154 |
[<ffffffff8810e1f0>] :i2c_core:i2c_transfer+0x47/0x53 |
| 155 |
[<ffffffff88a0b1f4>] :tvp5150:tvp5150_command+0x1555/0x15c1 |
| 156 |
[<ffffffff88a09b65>] :tvp5150:tvp5150_detect_client+0x0/0x13a |
| 157 |
[<ffffffff8810fa00>] :i2c_core:i2c_clients_command+0x82/0xc0 |
| 158 |
[<ffffffff889da444>] :em28xx:em28xx_config_i2c+0x8e/0x94 |
| 159 |
[<ffffffff889daa6b>] :em28xx:em28xx_init_dev+0x1bc/0x6ed |
| 160 |
[<ffffffff889dc6a2>] :em28xx:em28xx_usb_probe+0x1547/0x159c |
| 161 |
[<ffffffff80336724>] bit_putcs+0x4d5/0x58b |
| 162 |
[<ffffffff80336f32>] soft_cursor+0x19a/0x1ac |
| 163 |
[<ffffffff80336cc4>] bit_cursor+0x4ea/0x506 |
| 164 |
[<ffffffff80225348>] update_curr+0xe6/0x10b |
| 165 |
[<ffffffff80336724>] bit_putcs+0x4d5/0x58b |
| 166 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 167 |
[<ffffffff80301400>] number+0x20/0x1f9 |
| 168 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 169 |
[<ffffffff80302183>] vsnprintf+0x525/0x569 |
| 170 |
[<ffffffff802fefcd>] add_uevent_var+0x7d/0xa4 |
| 171 |
[<ffffffff803014f4>] number+0x114/0x1f9 |
| 172 |
[<ffffffff802fef00>] kobject_rename+0x9c/0xec |
| 173 |
[<ffffffff80225348>] update_curr+0xe6/0x10b |
| 174 |
[<ffffffff80300557>] rb_insert_color+0x61/0xda |
| 175 |
[<ffffffff802fdeb4>] ida_get_new_above+0xdc/0x16a |
| 176 |
[<ffffffff8029a224>] sysfs_addrm_finish+0x1d/0x1e1 |
| 177 |
[<ffffffff8027220e>] ifind+0xe/0x55 |
| 178 |
[<ffffffff8029b32d>] sysfs_create_link+0xea/0x141 |
| 179 |
[<ffffffff803f3ef5>] usb_match_one_id+0x26/0x82 |
| 180 |
[<ffffffff803f4b6b>] usb_probe_interface+0x89/0xb8 |
| 181 |
[<ffffffff8036886e>] driver_probe_device+0xd2/0x14e |
| 182 |
[<ffffffff803688ea>] __device_attach+0x0/0x5 |
| 183 |
[<ffffffff80367b83>] bus_for_each_drv+0x43/0x77 |
| 184 |
[<ffffffff80368979>] device_attach+0x67/0x7d |
| 185 |
[<ffffffff80367af2>] bus_attach_device+0x2a/0x78 |
| 186 |
[<ffffffff80366b02>] device_add+0x300/0x534 |
| 187 |
[<ffffffff803f35ed>] usb_set_configuration+0x45b/0x4b4 |
| 188 |
[<ffffffff803fa0b0>] generic_probe+0x15f/0x1f3 |
| 189 |
[<ffffffff8036886e>] driver_probe_device+0xd2/0x14e |
| 190 |
[<ffffffff803688ea>] __device_attach+0x0/0x5 |
| 191 |
[<ffffffff80367b83>] bus_for_each_drv+0x43/0x77 |
| 192 |
[<ffffffff80368979>] device_attach+0x67/0x7d |
| 193 |
[<ffffffff80367af2>] bus_attach_device+0x2a/0x78 |
| 194 |
[<ffffffff80366b02>] device_add+0x300/0x534 |
| 195 |
[<ffffffff803ef066>] usb_new_device+0xab/0xe4 |
| 196 |
[<ffffffff803efb96>] hub_thread+0x734/0xb0c |
| 197 |
[<ffffffff80238009>] autoremove_wake_function+0x0/0x2e |
| 198 |
[<ffffffff803ef462>] hub_thread+0x0/0xb0c |
| 199 |
[<ffffffff80237e36>] kthread+0x47/0x75 |
| 200 |
[<ffffffff8020bd88>] child_rip+0xa/0x12 |
| 201 |
[<ffffffff80237def>] kthread+0x0/0x75 |
| 202 |
[<ffffffff8020bd7e>] child_rip+0x0/0x12 |
| 203 |
|
| 204 |
fw_register_device: device_register failed |
| 205 |
xc3028-tuner.c: Unable to load firmware |
| 206 |
xc3028-tuner.c: ** PLEASE HAVE A LOOK AT ** |
| 207 |
xc3028-tuner.c: http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Firmware |
| 208 |
xc3028-tuner: no firmware uploaded (tuning not possible) |
| 209 |
em28xx #0: V4L2 VBI device registered as /dev/vbi0 |
| 210 |
em28xx #0: V4L2 device registered as /dev/video0 |
| 211 |
em28xx-audio.c: probing for em28x1 non standard usbaudio |
| 212 |
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger |
| 213 |
em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2 |
| 214 |
|
| 215 |
|
| 216 |
Gruß Erik |
Archives