1 |
hallo |
2 |
|
3 |
ich hab ein Problem mit meinem Sitecom WLan USB stick (WL-582 v001) |
4 |
|
5 |
ein iwconfig zeigt: |
6 |
|
7 |
wlan1 IEEE 802.11bgn |
8 |
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm |
9 |
Retry long limit:7 RTS thr:off Fragment thr:off |
10 |
Encryption key:off |
11 |
Power Management:on |
12 |
|
13 |
|
14 |
nen iwspy zeigt: |
15 |
|
16 |
wlan1 Interface doesn't support wireless statistic collection |
17 |
|
18 |
|
19 |
lsusb zeigt: |
20 |
Bus 001 Device 004: ID 0df6:0040 Sitecom Europe B.V. |
21 |
|
22 |
|
23 |
dmesg: |
24 |
|
25 |
usb 1-6: new high speed USB device using ehci_hcd and address 6 |
26 |
phy4: Selected rate control algorithm 'minstrel' |
27 |
Registered led device: rt2800usb-phy4::radio |
28 |
Registered led device: rt2800usb-phy4::assoc |
29 |
Registered led device: rt2800usb-phy4::quality |
30 |
udev: renamed network interface wlan0 to wlan1 |
31 |
rt2800usb 1-6:1.0: firmware: requesting rt2870.bin |
32 |
phy4 -> rt2x00lib_request_firmware: Error - Current firmware does not support |
33 |
detected chipset. |
34 |
rt2800usb 1-6:1.0: firmware: requesting rt2870.bin |
35 |
phy4 -> rt2x00lib_request_firmware: Error - Current firmware does not support |
36 |
detected chipset. |
37 |
|
38 |
wo stellt man den die Firmware ein? |
39 |
|
40 |
ich hab mal den knetworkmanager genommen, doch da kommt das: |
41 |
|
42 |
KNetworkManager cannot start because the installation is misconfigured. |
43 |
System DBUS policy does not allow it to provide user settings; |
44 |
contact your system administrator or distribution. |
45 |
KNetworkManager will not start automatically in future. |
46 |
|
47 |
|
48 |
versteh das anscheinend nicht :-(( |
49 |
|
50 |
weiß jemand rat? |
51 |
|
52 |
|
53 |
|
54 |
-- |
55 |
Gruß |
56 |
Thomas |
57 |
--- |
58 |
CBUILD="x86_64-pc-linux-gnu" |
59 |
CFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" |
60 |
CXXFLAGS="-march=core2 -O2 -msse4.1 -msse4.2 -pipe" |
61 |
LDFLAGS="-Wl,-O1,--hash-style=gnu,--sort-common,--as-needed" |