1 |
Hallo, |
2 |
|
3 |
ich habe den AVM BlueFritz!USB-Dongle entsprechend der |
4 |
Anleitung unter http://de.gentoo-wiki.com/BlueFRITZ_USB |
5 |
eingerichtet. |
6 |
|
7 |
Beim Anschluss erscheint folgende Meldung: |
8 |
|
9 |
Mar 8 13:18:39 pc3 usb 1-1: new full speed USB |
10 |
device using uhci_hcd and address 2 |
11 |
Mar 8 13:18:39 pc3 usb 1-1: configuration #1 chosen from 2 choices |
12 |
Mar 8 13:18:40 pc3 usb.agent[8024]: Keeping default |
13 |
configuration with /sys//devices/pci0000:00/0000:00:07.2/usb1/1-1 |
14 |
Mar 8 13:18:40 pc3 Bluetooth: BlueFRITZ! USB loading firmware |
15 |
Mar 8 13:18:43 pc3 Bluetooth: BlueFRITZ! USB device ready |
16 |
Mar 8 13:18:43 pc3 capi-usb: could not load driver bfusb! |
17 |
Mar 8 13:18:44 pc3 hcid[8192]: Bluetooth HCI daemon |
18 |
Mar 8 13:18:44 pc3 sdpd[8194]: Bluetooth SDP daemon |
19 |
Mar 8 13:18:44 pc3 hcid[8192]: HCI dev 0 up |
20 |
Mar 8 13:18:44 pc3 hcid[8192]: Starting security manager 0 |
21 |
|
22 |
Muss ich mir wegen "capi-usb: could not load driver bfusb!" |
23 |
Gedanken machen? Wie kann ich das beheben? Wo finde ich den Treiber |
24 |
bfusb? (bei AVM gibt es nur die firmware) |
25 |
|
26 |
Danach verbinde ich mich mit "ciptool scan" mit dem |
27 |
AccessPoint. Dies scheint zu funktionieren. |
28 |
Daraufhin starte ich "/etc/init.d/capi start". Schließlich |
29 |
möchte ich die Verbindung mit "pppd call isdn/t-online" |
30 |
herstellen. Jedoch kommt diese nicht zustande: |
31 |
|
32 |
Mar 8 13:19:11 pc3 pppd[8254]: Plugin userpass.so loaded. |
33 |
Mar 8 13:19:11 pc3 pppd[8254]: userpass: $Revision: 1.5 $ |
34 |
Mar 8 13:19:11 pc3 pppd[8254]: Plugin capiplugin.so loaded. |
35 |
Mar 8 13:19:11 pc3 pppd[8254]: capiplugin: $Revision: 1.36 $ |
36 |
Mar 8 13:19:11 pc3 pppd[8254]: capiconn: 1.13 |
37 |
Mar 8 13:19:11 pc3 CSLIP: code copyright 1989 Regents of the University of California |
38 |
Mar 8 13:19:11 pc3 PPP generic driver version 2.4.2 |
39 |
Mar 8 13:19:11 pc3 pppd[8274]: pppd 2.4.2 started by root, uid 0 |
40 |
Mar 8 13:19:11 pc3 pppd[8274]: capiplugin: phase serialconn. |
41 |
Mar 8 13:19:11 pc3 pppd[8274]: capiplugin: contr=1 |
42 |
Mar 8 13:19:11 pc3 pppd[8274]: controller 1: listen_change_state 0 -> 1 |
43 |
Mar 8 13:19:11 pc3 pppd[8274]: controller 1: listen_change_state state=1 event=1 ???? |
44 |
Mar 8 13:19:11 pc3 pppd[8274]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 |
45 |
Mar 8 13:19:11 pc3 pppd[8274]: controller 1: listen_change_state 1 -> 0 |
46 |
Mar 8 13:19:11 pc3 pppd[8274]: plci_change_state:0x0 0 -> 1 event=1 |
47 |
Mar 8 13:19:11 pc3 pppd[8274]: capiplugin: dialing 0191011 (hdlc) |
48 |
Mar 8 13:19:11 pc3 pppd[8274]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 |
49 |
Mar 8 13:19:11 pc3 pppd[8274]: controller 1: listen_change_state state=0 event=3 ???? |
50 |
Mar 8 13:19:11 pc3 pppd[8274]: plci_change_state:0x101 1 -> 2 event=3 |
51 |
Mar 8 13:19:14 pc3 pppd[8274]: plci_change_state:0x101 2 -> 3 event=6 |
52 |
Mar 8 13:19:14 pc3 pppd[8274]: ncci_change_state:0x101 0 -> 1 event=1 |
53 |
Mar 8 13:19:14 pc3 pppd[8274]: ncci_change_state:0x10101 1 -> 3 event=3 |
54 |
Mar 8 13:19:14 pc3 pppd[8274]: ncci_change_state:0x10101 3 -> 4 event=7 |
55 |
Mar 8 13:19:14 pc3 pppd[8274]: ncci 0x10101 up |
56 |
Mar 8 13:19:14 pc3 pppd[8274]: capiplugin: connected: "" -> "0191011" outgoing (pcli=0x101/ncci=0x10101) |
57 |
Mar 8 13:19:15 pc3 pppd[8274]: using channel 1 |
58 |
Mar 8 13:19:15 pc3 pppd[8274]: Using interface ppp0 |
59 |
Mar 8 13:19:15 pc3 pppd[8274]: Connect: ppp0 <--> /dev/capi/0 |
60 |
Mar 8 13:19:15 pc3 pppd[8274]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x940ab1ef> <pcomp> <accomp>] |
61 |
Mar 8 13:19:15 pc3 pppd[8274]: capiplugin: phase establish (was serialconn). |
62 |
Mar 8 13:19:18 pc3 pppd[8274]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x940ab1ef> <pcomp> <accomp>] |
63 |
Mar 8 13:19:21 pc3 pppd[8274]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x940ab1ef> <pcomp> <accomp>] |
64 |
Mar 8 13:19:24 pc3 pppd[8274]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x940ab1ef> <pcomp> <accomp>] |
65 |
Mar 8 13:19:25 pc3 pppd[8274]: rcvd [LCP ConfReq id=0x1 <mru 1524> <auth pap> <mrru 1524> <endpoint [local:73.74.61.63.6b.69.6e.67]>] |
66 |
Mar 8 13:19:25 pc3 pppd[8274]: sent [LCP ConfRej id=0x1 <mrru 1524>] |
67 |
|
68 |
dies erscheint dann noch ein Dutzend mal. Danach sendet er ca. 20mal |
69 |
die Bentutzerdaten |
70 |
... und dann bricht die Verbindung zusammen (falls sie jemals bestand): |
71 |
|
72 |
Mar 8 13:20:11 pc3 pppd[8274]: controller 1: |
73 |
listen_change_state 1 -> 0 |
74 |
Mar 8 13:20:11 pc3 pppd[8274]: Connection terminated. |
75 |
Mar 8 13:20:11 pc3 pppd[8274]: capiplugin: phase disconnect (was dead). |
76 |
Mar 8 13:20:12 pc3 pppd[8274]: controller 1: listen_change_state 0 -> 1 |
77 |
Mar 8 13:20:12 pc3 pppd[8274]: controller 1: listen_change_state state=1 event=1 ???? |
78 |
Mar 8 13:20:12 pc3 pppd[8274]: controller 1: listen_change_state state=1 event=1 ???? |
79 |
Mar 8 13:20:12 pc3 pppd[8274]: controller 1: listen_change_state state=1 event=1 ???? |
80 |
Mar 8 13:20:12 pc3 pppd[8274]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 |
81 |
Mar 8 13:20:12 pc3 pppd[8274]: controller 1: listen_change_state 1 -> 0 |
82 |
Mar 8 13:20:12 pc3 pppd[8274]: capiplugin: exit |
83 |
Mar 8 13:20:12 pc3 pppd[8274]: Exit. |
84 |
Mar 8 13:20:12 pc3 kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000b LEN=0014 |
85 |
Mar 8 13:20:12 pc3 Controller/PLCI/NCCI = 0x1 |
86 |
Mar 8 13:20:12 pc3 Info = 0x0 |
87 |
Mar 8 13:20:12 pc3 ) |
88 |
Mar 8 13:20:12 pc3 kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000c LEN=0014 |
89 |
Mar 8 13:20:12 pc3 Controller/PLCI/NCCI = 0x1 |
90 |
Mar 8 13:20:12 pc3 Info = 0x0 |
91 |
Mar 8 13:20:12 pc3 ) |
92 |
Mar 8 13:20:12 pc3 kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000d LEN=0014 |
93 |
Mar 8 13:20:12 pc3 Controller/PLCI/NCCI = 0x1 |
94 |
Mar 8 13:20:12 pc3 Info = 0x0 |
95 |
Mar 8 13:20:12 pc3 ) |
96 |
Mar 8 13:20:12 pc3 kcapi: handle_message: applid 1 state released (LISTEN_CONF ID=001 #0x000e LEN=0014 |
97 |
Mar 8 13:20:12 pc3 Controller/PLCI/NCCI = 0x1 |
98 |
Mar 8 13:20:12 pc3 Info = 0x0 |
99 |
Mar 8 13:20:12 pc3 ) |
100 |
|
101 |
Hat irgendjemand eine Idee, wieso ich keine Verbindung bekomme? |
102 |
|
103 |
MfG |
104 |
Sebastian |