1 |
Hallo Gerhard, |
2 |
|
3 |
na da sagt dmesg dir doch schon direkt, was das Problem ist und wie du |
4 |
es lösen kannst. |
5 |
|
6 |
Da fehlen einfach noch ein paar Firmware Files, die wohl in |
7 |
linux-firmware nicht enthalten sind. Aber wenn du dem Link von dmesg |
8 |
folgst, wirst du die Files erhalten und musst sie nur entsprechend in |
9 |
/lib/firmware ablegen. |
10 |
|
11 |
LG |
12 |
Martin |
13 |
|
14 |
Am 09.09.2016 um 10:31 schrieb Gössl Gerhard: |
15 |
> Hallo , |
16 |
> |
17 |
> dmesg bringt bei meinem selbstgebackenen Kernel |
18 |
> |
19 |
> folgendes: |
20 |
> |
21 |
> |
22 |
> |
23 |
> b43-phy0: Broadcom 4311 WLAN found (core revision 13) |
24 |
> b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9 |
25 |
> b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 |
26 |
> b43-phy0 warning: 5 GHz band is unsupported on this PHY |
27 |
> b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2 |
28 |
> b43 ssb0:0: Direct firmware load for b43/ucode13.fw failed with error -2 |
29 |
> b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with |
30 |
> error -2 |
31 |
> b43 ssb0:0: Direct firmware load for b43-open/ucode13.fw failed with |
32 |
> error -2 |
33 |
> b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found |
34 |
> b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found |
35 |
> b43-phy0 ERROR: You must go to |
36 |
> http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and |
37 |
> download the correct firmware for this driver version. Please carefully |
38 |
> read all instructions on this website. |
39 |
> |
40 |
> |
41 |
> |
42 |
> Habe aber sys-kernel/linux-firmware-20160628 installiert !! |
43 |
> |
44 |
> Die Treiber für den Broadcom 4311 sind als Module installiert. |
45 |
> |
46 |
> |
47 |
> |
48 |
> |
49 |
> GRUß |
50 |
> |
51 |
> Gerhard Gössl |
52 |
> |
53 |
> isny im ALL |
54 |
> |