| 1 |
Hi, |
| 2 |
|
| 3 |
ich hatte gestern endlich mal Zeit meinen neuen Rechner zusammenzubauen und |
| 4 |
Gentoo zu installieren. Ich hab gestern auch noch etliche Programme |
| 5 |
kompiliert - alles ohne Probleme... |
| 6 |
|
| 7 |
Heute morgen habe ich emerge dann 2 kde meta pakete bauen lassen und als ich |
| 8 |
vom Frühstück zurück kam sah ich folgendes auf meinem Bildschirm: |
| 9 |
|
| 10 |
Hardware Error |
| 11 |
Cpu 0: Machine Check Exception: 4 Bank 4: ba000000000b000f |
| 12 |
TSC Gf43dc30c0b MISC c008000001000000 |
| 13 |
This is not a software problem. |
| 14 |
<Contact your hardware vender oder so ähnlich> |
| 15 |
Kernel panic - not syncinc. Machine check |
| 16 |
|
| 17 |
Ich hab dann einfach reset gedrückt, der Rechner bootete normal, mittlerweile |
| 18 |
sind die Pakete auch installiert, sogar openoffice baut bis jetzt ohne |
| 19 |
Probleme. |
| 20 |
|
| 21 |
Mich würde interessieren, was dieser Fehler bedeutet. |
| 22 |
|
| 23 |
Hier noch ein Paar Info's zum Rechner: |
| 24 |
|
| 25 |
# sudo lspci |
| 26 |
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) |
| 27 |
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) |
| 28 |
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) |
| 29 |
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) |
| 30 |
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) |
| 31 |
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) |
| 32 |
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) |
| 33 |
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) |
| 34 |
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) |
| 35 |
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) |
| 36 |
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) |
| 37 |
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) |
| 38 |
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) |
| 39 |
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, |
| 40 |
Athlon64, Sempron] HyperTransport Configuration |
| 41 |
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, |
| 42 |
Athlon64, Sempron] Address Map |
| 43 |
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, |
| 44 |
Athlon64, Sempron] DRAM Controller |
| 45 |
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, |
| 46 |
Athlon64, Sempron] Miscellaneous Control |
| 47 |
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, |
| 48 |
Athlon64, Sempron] Link Control |
| 49 |
01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB |
| 50 |
chip / Technisat SkyStar2 DVB card (rev 02) |
| 51 |
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 |
| 52 |
Controller (PHY/Link) |
| 53 |
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev |
| 54 |
a1) |
| 55 |
|
| 56 |
# cat /proc/cpuinfo |
| 57 |
processor : 0 |
| 58 |
vendor_id : AuthenticAMD |
| 59 |
cpu family : 16 |
| 60 |
model : 2 |
| 61 |
model name : AMD Phenom(tm) 9500 Quad-Core Processor |
| 62 |
stepping : 2 |
| 63 |
cpu MHz : 2211.332 |
| 64 |
cache size : 512 KB |
| 65 |
physical id : 0 |
| 66 |
siblings : 4 |
| 67 |
core id : 0 |
| 68 |
cpu cores : 4 |
| 69 |
fpu : yes |
| 70 |
fpu_exception : yes |
| 71 |
cpuid level : 5 |
| 72 |
wp : yes |
| 73 |
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca |
| 74 |
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt |
| 75 |
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good pni cx16 popcnt |
| 76 |
lahf_lm cmp_legacy svm extapic cr8_legacy altmovcr8 abm sse4a misalignsse |
| 77 |
3dnowprefetch osvw |
| 78 |
bogomips : 4426.09 |
| 79 |
TLB size : 1024 4K pages |
| 80 |
clflush size : 64 |
| 81 |
cache_alignment : 64 |
| 82 |
address sizes : 48 bits physical, 48 bits virtual |
| 83 |
power management: ts ttp tm stc 100mhzsteps hwpstate |
| 84 |
|
| 85 |
processor : 1 |
| 86 |
vendor_id : AuthenticAMD |
| 87 |
cpu family : 16 |
| 88 |
model : 2 |
| 89 |
model name : AMD Phenom(tm) 9500 Quad-Core Processor |
| 90 |
stepping : 2 |
| 91 |
cpu MHz : 2211.332 |
| 92 |
cache size : 512 KB |
| 93 |
physical id : 0 |
| 94 |
siblings : 4 |
| 95 |
core id : 1 |
| 96 |
cpu cores : 4 |
| 97 |
fpu : yes |
| 98 |
fpu_exception : yes |
| 99 |
cpuid level : 5 |
| 100 |
wp : yes |
| 101 |
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca |
| 102 |
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt |
| 103 |
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good pni cx16 popcnt |
| 104 |
lahf_lm cmp_legacy svm extapic cr8_legacy altmovcr8 abm sse4a misalignsse |
| 105 |
3dnowprefetch osvw |
| 106 |
bogomips : 4422.86 |
| 107 |
TLB size : 1024 4K pages |
| 108 |
clflush size : 64 |
| 109 |
cache_alignment : 64 |
| 110 |
address sizes : 48 bits physical, 48 bits virtual |
| 111 |
power management: ts ttp tm stc 100mhzsteps hwpstate |
| 112 |
|
| 113 |
processor : 2 |
| 114 |
vendor_id : AuthenticAMD |
| 115 |
cpu family : 16 |
| 116 |
model : 2 |
| 117 |
model name : AMD Phenom(tm) 9500 Quad-Core Processor |
| 118 |
stepping : 2 |
| 119 |
cpu MHz : 2211.332 |
| 120 |
cache size : 512 KB |
| 121 |
physical id : 0 |
| 122 |
siblings : 4 |
| 123 |
core id : 3 |
| 124 |
cpu cores : 4 |
| 125 |
fpu : yes |
| 126 |
fpu_exception : yes |
| 127 |
cpuid level : 5 |
| 128 |
wp : yes |
| 129 |
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca |
| 130 |
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt |
| 131 |
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good pni cx16 popcnt |
| 132 |
lahf_lm cmp_legacy svm extapic cr8_legacy altmovcr8 abm sse4a misalignsse |
| 133 |
3dnowprefetch osvw |
| 134 |
bogomips : 4422.72 |
| 135 |
TLB size : 1024 4K pages |
| 136 |
clflush size : 64 |
| 137 |
cache_alignment : 64 |
| 138 |
address sizes : 48 bits physical, 48 bits virtual |
| 139 |
power management: ts ttp tm stc 100mhzsteps hwpstate |
| 140 |
|
| 141 |
processor : 3 |
| 142 |
vendor_id : AuthenticAMD |
| 143 |
cpu family : 16 |
| 144 |
model : 2 |
| 145 |
model name : AMD Phenom(tm) 9500 Quad-Core Processor |
| 146 |
stepping : 2 |
| 147 |
cpu MHz : 2211.332 |
| 148 |
cache size : 512 KB |
| 149 |
physical id : 0 |
| 150 |
siblings : 4 |
| 151 |
core id : 2 |
| 152 |
cpu cores : 4 |
| 153 |
fpu : yes |
| 154 |
fpu_exception : yes |
| 155 |
cpuid level : 5 |
| 156 |
wp : yes |
| 157 |
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca |
| 158 |
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt |
| 159 |
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good pni cx16 popcnt |
| 160 |
lahf_lm cmp_legacy svm extapic cr8_legacy altmovcr8 abm sse4a misalignsse |
| 161 |
3dnowprefetch osvw |
| 162 |
bogomips : 4422.73 |
| 163 |
TLB size : 1024 4K pages |
| 164 |
clflush size : 64 |
| 165 |
cache_alignment : 64 |
| 166 |
address sizes : 48 bits physical, 48 bits virtual |
| 167 |
power management: ts ttp tm stc 100mhzsteps hwpstate |
| 168 |
|
| 169 |
# sensors |
| 170 |
it8716-isa-0290 |
| 171 |
Adapter: ISA adapter |
| 172 |
VCore: +1.26 V (min = +0.00 V, max = +4.08 V) |
| 173 |
VDDR: +1.92 V (min = +0.00 V, max = +4.08 V) |
| 174 |
+3.3V: +3.34 V (min = +0.00 V, max = +4.08 V) |
| 175 |
+5V: +5.05 V (min = +0.00 V, max = +6.85 V) |
| 176 |
+12V: +11.97 V (min = +0.00 V, max = +16.32 V) |
| 177 |
in5: +0.06 V (min = +0.00 V, max = +4.08 V) |
| 178 |
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM |
| 179 |
5VSB: +4.95 V (min = +0.00 V, max = +6.85 V) |
| 180 |
VBat: +3.02 Vit8716-isa-0290 |
| 181 |
Adapter: ISA adapter |
| 182 |
VCore: +1.26 V (min = +0.00 V, max = +4.08 V) |
| 183 |
VDDR: +1.92 V (min = +0.00 V, max = +4.08 V) |
| 184 |
+3.3V: +3.34 V (min = +0.00 V, max = +4.08 V) |
| 185 |
+5V: +5.05 V (min = +0.00 V, max = +6.85 V) |
| 186 |
+12V: +11.97 V (min = +0.00 V, max = +16.32 V) |
| 187 |
in5: +0.06 V (min = +0.00 V, max = +4.08 V) |
| 188 |
in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM |
| 189 |
5VSB: +4.95 V (min = +0.00 V, max = +6.85 V) |
| 190 |
VBat: +3.02 V |
| 191 |
fan1: 1859 RPM (min = 10 RPM) |
| 192 |
fan2: 1544 RPM (min = 0 RPM) |
| 193 |
fan3: 0 RPM (min = 0 RPM) |
| 194 |
temp1: +25 C (low = +127 C, high = +127 C) sensor = thermistor |
| 195 |
temp2: -6 C (low = +127 C, high = +127 C) sensor = thermistor |
| 196 |
temp3: +36 C (low = +127 C, high = +70 C) sensor = diode |
| 197 |
vid: +0.000 V |
| 198 |
|
| 199 |
|
| 200 |
-- |
| 201 |
Greetings |
| 202 |
Chris |
| 203 |
fan1: 1859 RPM (min = 10 RPM) |
| 204 |
fan2: 1544 RPM (min = 0 RPM) |
| 205 |
fan3: 0 RPM (min = 0 RPM) |
| 206 |
temp1: +25 C (low = +127 C, high = +127 C) sensor = thermistor |
| 207 |
temp2: -6 C (low = +127 C, high = +127 C) sensor = thermistor |
| 208 |
temp3: +36 C (low = +127 C, high = +70 C) sensor = diode |
| 209 |
vid: +0.000 V |
| 210 |
-- |
| 211 |
gentoo-user-de@g.o mailing list |
Archives