1 |
Am Freitag 18 Januar 2008 07:52:47 schrieb acid: |
2 |
> Hallo Erik, |
3 |
> |
4 |
> was zeigt dmesg denn an, nachdem du den Stick reingesteckt hast? ('dmesg |
5 |
> |
6 |
> | grep dvb') |
7 |
> |
8 |
bronco ~ # dmesg | grep dvb |
9 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/pvrusb2-main.c: Hauppauge |
10 |
WinTV-PVR-USB2 MPEG2 Encoder/Tuner : V4L in-tree version |
11 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/pvrusb2-main.c: Debug mask |
12 |
is 15 (0xf) |
13 |
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's |
14 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner |
15 |
callback |
16 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner |
17 |
callback |
18 |
|
19 |
> Wo besteht genau dein Problem? |
20 |
|
21 |
dmesg (vor dem Einstecken des Sticks): |
22 |
.... |
23 |
Linux video capture interface: v2.00 |
24 |
usbcore: registered new interface driver pvrusb2 |
25 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/pvrusb2-main.c: Hauppauge |
26 |
WinTV-PVR-USB2 MPEG2 Encoder/Tuner : V4L in-tree version |
27 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/pvrusb2-main.c: Debug mask |
28 |
is 15 (0xf) |
29 |
... |
30 |
|
31 |
dmesg (nach dem Einstecken des Sticks): |
32 |
... |
33 |
usb 1-2: new high speed USB device using ehci_hcd and address 5 |
34 |
usb 1-2: configuration #1 chosen from 1 choice |
35 |
em28xx v4l2 driver version 0.0.1 loaded |
36 |
em28xx new video device (2040:6502): interface 0, class 255 |
37 |
em28xx: device is attached to a USB 2.0 bus |
38 |
em28xx: you're using the experimental/unstable tree from mcentral.de |
39 |
em28xx: there's also a stable tree available but which is limited to |
40 |
em28xx: linux <=2.6.19.2 |
41 |
em28xx: it's fine to use this driver but keep in mind that it will move |
42 |
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's |
43 |
em28xx: proved to be stable |
44 |
em28xx #0: Alternate settings: 8 |
45 |
em28xx #0: Alternate setting 0, max size= 0 |
46 |
em28xx #0: Alternate setting 1, max size= 0 |
47 |
em28xx #0: Alternate setting 2, max size= 1448 |
48 |
em28xx #0: Alternate setting 3, max size= 2048 |
49 |
em28xx #0: Alternate setting 4, max size= 2304 |
50 |
em28xx #0: Alternate setting 5, max size= 2580 |
51 |
em28xx #0: Alternate setting 6, max size= 2892 |
52 |
em28xx #0: Alternate setting 7, max size= 3072 |
53 |
FAILED: 0xa0 0x07 |
54 |
em28xx #0: Your board has no eeprom inside it and thus can't |
55 |
em28xx #0: be autodetected. Please pass card=<n> insmod option to |
56 |
em28xx #0: workaround that. Redirect complaints to the vendor of |
57 |
em28xx #0: the TV card. Generic type will be used. |
58 |
em28xx #0: Best regards, |
59 |
em28xx #0: -- tux |
60 |
em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod |
61 |
option: |
62 |
em28xx #0: card=0 -> Generic EM2800 video grabber |
63 |
em28xx #0: card=1 -> Generic EM2820 video grabber |
64 |
em28xx #0: card=2 -> Generic EM2821 video grabber |
65 |
em28xx #0: card=3 -> Generic EM2870 video grabber |
66 |
em28xx #0: card=4 -> Generic EM2881 video grabber |
67 |
em28xx #0: card=5 -> Generic EM2860 video grabber |
68 |
em28xx #0: card=6 -> Generic EM2861 video grabber |
69 |
em28xx #0: card=7 -> Terratec Cinergy 250 USB |
70 |
em28xx #0: card=8 -> Pinnacle PCTV USB 2 |
71 |
em28xx #0: card=9 -> Hauppauge WinTV USB 2 |
72 |
em28xx #0: card=10 -> MSI VOX USB 2.0 |
73 |
em28xx #0: card=11 -> Terratec Cinergy 200 USB |
74 |
em28xx #0: card=12 -> Leadtek Winfast USB II |
75 |
em28xx #0: card=13 -> Kworld USB2800 |
76 |
em28xx #0: card=14 -> Pinnacle Dazzle DVC 90 |
77 |
em28xx #0: card=15 -> Hauppauge WinTV HVR 900 |
78 |
em28xx #0: card=16 -> Terratec Hybrid XS |
79 |
em28xx #0: card=17 -> Terratec Hybrid XS Secam |
80 |
em28xx #0: card=18 -> Kworld PVR TV 2800 RF |
81 |
em28xx #0: card=19 -> Terratec Prodigy XS |
82 |
em28xx #0: card=20 -> Videology 20K14XUSB USB2.0 |
83 |
em28xx #0: card=21 -> Usbgear VD204v9 |
84 |
em28xx #0: card=22 -> Terratec Cinergy T XS |
85 |
em28xx #0: card=23 -> Pinnacle PCTV DVB-T |
86 |
em28xx #0: card=24 -> DNT DA2 Hybrid |
87 |
em28xx #0: card=25 -> Pinnacle Hybrid Pro |
88 |
em28xx #0: card=26 -> Hercules Smart TV USB 2.0 |
89 |
em28xx #0: card=27 -> Compro, VideoMate U3 |
90 |
em28xx #0: card=28 -> KWorld DVB-T 310U |
91 |
em28xx #0: card=29 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 |
92 |
em28xx #0: card=30 -> Terratec Cinergy T XS (MT2060) |
93 |
em28xx #0: card=31 -> MSI DigiVox A/D |
94 |
em28xx #0: card=32 -> D-Link DUB-T210 TV Tuner |
95 |
em28xx #0: card=33 -> Gadmei UTV310 |
96 |
em28xx #0: card=34 -> Kworld 355 U DVB-T |
97 |
em28xx #0: card=35 -> Supercomp USB 2.0 TV |
98 |
em28xx #0: card=36 -> Hauppauge WinTV HVR Rev. 1.2 |
99 |
em28xx #0: card=37 -> Gadmei UTV330 |
100 |
em28xx #0: card=38 -> V-Gear PocketTV |
101 |
em28xx #0: card=39 -> Kworld 350 U DVB-T |
102 |
em28xx #0: card=40 -> Terratec Hybrid XS (em2882) |
103 |
em28xx #0: card=41 -> Pinnacle Dazzle DVC 100 |
104 |
em28xx #0: card=42 -> Generic EM2750 video grabber |
105 |
em28xx #0: card=43 -> Yakumo MovieMixer |
106 |
em28xx #0: card=44 -> Huaqi DLCW-130 |
107 |
em28xx #0: card=45 -> Generic EM2883 video grabber |
108 |
em28xx #0: card=46 -> Hauppauge WinTV HVR 950 |
109 |
em28xx #0: card=47 -> Pinnacle PCTV HD Pro |
110 |
em28xx #0: card=48 -> Pinnacle Hybrid Pro (2) |
111 |
em28xx #0: card=49 -> Hauppauge WinTV USB 2 (R2) |
112 |
em28xx #0: card=50 -> NetGMBH Cam |
113 |
em28xx #0: card=51 -> Leadtek Winfast USB II Deluxe |
114 |
em28xx #0: card=52 -> MSI DigiVox A/D II |
115 |
em28xx #0: card=53 -> Typhoon DVD Maker |
116 |
em28xx #0: card=54 -> Pinnacle PCTV USB 2 (Philips FM1216ME) |
117 |
em28xx #0: card=55 -> EM2751 Webcam + Audio |
118 |
em28xx #0: card=56 -> KWorld DVB-T 305U |
119 |
em28xx #0: card=57 -> KWorld PVRTV 300U |
120 |
em28xx #0: card=58 -> Kworld PlusTV HD Hybrid 330 |
121 |
em28xx #0: card=59 -> Terratec Cinergy A Hybrid XS |
122 |
em28xx #0: card=60 -> Plextor ConvertX PX-TV100U |
123 |
em28xx #0: card=61 -> Kworld VS-DVB-T 323UR |
124 |
attach_inform: eeprom detected. |
125 |
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 |
126 |
em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 |
127 |
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 |
128 |
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 |
129 |
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
130 |
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
131 |
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 |
132 |
em28xx #0: i2c eeprom 70: 33 00 30 00 35 00 37 00 35 00 34 00 33 00 30 00 |
133 |
em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 |
134 |
em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 |
135 |
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 |
136 |
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 46 b3 |
137 |
em28xx #0: i2c eeprom c0: 3d f0 74 02 01 00 01 79 04 00 00 00 00 00 00 00 |
138 |
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89 |
139 |
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 46 b3 |
140 |
em28xx #0: i2c eeprom f0: 3d f0 74 02 01 00 01 79 04 00 00 00 00 00 00 00 |
141 |
EEPROM ID= 0x9567eb1a |
142 |
Vendor/Product ID= 2040:6502 |
143 |
AC97 audio (5 sample rates) |
144 |
500mA max power |
145 |
Table at 0x24, strings=0x1e82, 0x186a, 0x0000 |
146 |
tuner 4-0061: chip found @ 0xc2 (em28xx #0) |
147 |
attach inform (default): detected I2C address c2 |
148 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner |
149 |
callback |
150 |
/home/ed/download/linuxtv/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner |
151 |
callback |
152 |
i2c-adapter i2c-4: FATAL: max6650_attach_adapter class HWMON not set |
153 |
em28xx #0: found i2c device @ 0xa0 [eeprom] |
154 |
em28xx #0: found i2c device @ 0xc2 [tuner (analog)] |
155 |
tuner 4-0061: Tuner has no way to set tv freq |
156 |
em28xx #0: Found Generic EM2881 video grabber |
157 |
usbcore: registered new interface driver em28xx |
158 |
|
159 |
|
160 |
Die dritte Zeile von unten bedeutet für mich, daß mit der Firmware etwas nicht |
161 |
stimmt. Oder liege ich da falsch? |
162 |
|
163 |
|
164 |
> Vielleicht kannst du uns ja die Stelle in |
165 |
> dem HowTo sagen an der du nicht weiter kommt. |
166 |
|
167 |
An dieser Stelle des HOWTOs komme ich schon in Schwierigkeiten: |
168 |
|
169 |
"Firmware v3 ist für folgende Geräte nötig: |
170 |
* HVR 900 B2C0 (Die nummer steht auf der Unterseite auf dem Sticker)" |
171 |
|
172 |
auf meinem steht "B3C0" |
173 |
|
174 |
Gruß Erik |