| 1 |
Hi Leute, |
| 2 |
|
| 3 |
ich habe seit gestern kein Bild mehr bei KDE-TV, der Schirm bleibt einfach |
| 4 |
schwarz. Ton gibts noch. Es liegt nicht an Treibern/Config der TV-Karte, da |
| 5 |
ich mit TV-Time noch ein Bild bekomme. Ich habe nichts geändert. Einzig die |
| 6 |
Updates der letzten beiden Tage über Portage eingespielt. |
| 7 |
|
| 8 |
Hier das Log von kdetv über Konsole gestartet: |
| 9 |
kv4lsetup: using X11 display :0 |
| 10 |
dga: version 2.0 |
| 11 |
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xc0000000 |
| 12 |
/dev/v4l/video0 [v4l2]: configuration done |
| 13 |
Try to open v4l2 vbi device, libzvbi interface rev. |
| 14 |
$Id: io-v4l2.c,v 1.12 2002/11/30 02:37:18 mschimek Exp $Opened /dev/vbi |
| 15 |
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev. |
| 16 |
$Id: io-v4l2k.c,v 1.4 2003/02/16 18:58:07 mschimek Exp $Opened /dev/vbi |
| 17 |
/dev/vbi (BT878 video (Terratec TerraTVal) is a v4l2 vbi device, |
| 18 |
driver bttv, version 0x0000090f |
| 19 |
Current scanning system is 625 |
| 20 |
Querying current vbi parameters... success |
| 21 |
VBI capture parameters granted: format 59455247, 35468950 Hz, 2048 bpl, offs |
| 22 |
244, F1 7+16, F2 319+16, flags 00000000 |
| 23 |
Nyquist check passed |
| 24 |
Request decoding of services 0x60000c7f |
| 25 |
Will decode services 0x0000041f |
| 26 |
Using streaming interface |
| 27 |
Fifo initialized |
| 28 |
Requesting streaming i/o buffers |
| 29 |
kdetv: WARNING: VBIDecoder: vbi_capture_v4l2_new error: Cannot request |
| 30 |
streaming i/o buffers from /dev/vbi (BT878 video (Terratec TerraTVal): 22, |
| 31 |
Invalid argument. |
| 32 |
Try to open v4l vbi device, libzvbi interface rev. |
| 33 |
$Id: io-v4l.c,v 1.9 2002/11/30 02:37:18 mschimek Exp $Opened /dev/vbi |
| 34 |
Driver name 'BT878 video (Terratec TerraTVal' |
| 35 |
Attempt to guess the videostandard |
| 36 |
Driver supports VIDIOCGTUNER: 0 |
| 37 |
Videostandard is PAL/SECAM |
| 38 |
/dev/vbi (BT878 video (Terratec TerraTVal) is a v4l vbi device |
| 39 |
Hinted video standard 0, guessed 625 |
| 40 |
Driver supports VIDIOCGVBIFMT, guessed videostandard 625 |
| 41 |
Accept current vbi parameters |
| 42 |
Guessed videostandard 625 |
| 43 |
Nyquist check passed |
| 44 |
Will decode services 0x0000041f |
| 45 |
Warning: no read select, reading will block |
| 46 |
Capture buffer allocated |
| 47 |
Successful opened /dev/vbi (BT878 video (Terratec TerraTVal) |
| 48 |
kdetv: WARNING: V4L2Dev::enqueueBuffer(): buffer already queued: 2 |
| 49 |
V4L2Grabber::~V4L2Grabber(): wait(). |
| 50 |
V4L2Grabber::~V4L2Grabber(): deleted. |
| 51 |
|
| 52 |
|
| 53 |
Wäre Klasse, wenn mir jemand helfen könnte. |
| 54 |
|
| 55 |
viele Grüße |
| 56 |
|
| 57 |
matthias |
| 58 |
|
| 59 |
-- |
| 60 |
gentoo-user-de@g.o mailing list |
Archives