| 1 |
-----BEGIN PGP SIGNED MESSAGE----- |
| 2 |
Hash: RIPEMD160 |
| 3 |
|
| 4 |
|
| 5 |
Guten Tag - liebe Gentoo-liste-leute, |
| 6 |
|
| 7 |
nach dem Missverständnis von neulich, bei dem nicht nur mein Postfach |
| 8 |
mit unsinnigen Mails befüllt wurde, wollte ich mal wieder zu etwas |
| 9 |
Ernstem kommen... |
| 10 |
|
| 11 |
Für eine meiner unzähligen Platten steht regelmäßig im Syslog: |
| 12 |
"Feb 26 14:08:27 [smartd] Device: /dev/sdf, 1 Offline uncorrectable |
| 13 |
sectors_" |
| 14 |
|
| 15 |
Weiter unten habe ich noch mal die komplette Ausgabe von |
| 16 |
"smartctl --all /dev/sdf" angehängt. |
| 17 |
|
| 18 |
Den Fehler habe ich bestimmt schon seit ein paar Monaten, ich habe immer |
| 19 |
drauf gewartet, dass die Platte komplett den Geist aufgibt um sie dann |
| 20 |
auszuwechseln und den Raid1-Verbund wieder herzustellen, allerdings |
| 21 |
läuft sie nun ja schon seit Monaten... |
| 22 |
|
| 23 |
Also was meint ihr? Soll ich sie raussschmeissen? Wegschmeissen und neu |
| 24 |
kaufen? Habt ihr Erfahrungen mit solchen Fehlern? |
| 25 |
Ich habe smartd erst vor ein paar Wochen bei mir installiert und vorher |
| 26 |
immer erst Platten gewechselt, wenn sie halt nciht mehr liefen ;-) |
| 27 |
|
| 28 |
Gruß |
| 29 |
André |
| 30 |
=================================================== |
| 31 |
|
| 32 |
saturn ~ # smartctl --all /dev/sdf |
| 33 |
|
| 34 |
~ smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) |
| 35 |
2002-6 Bruce Allen |
| 36 |
Home page is http://smartmontools.sourceforge.net/ |
| 37 |
|
| 38 |
=== START OF INFORMATION SECTION === |
| 39 |
Device Model: SAMSUNG SP1614C |
| 40 |
Serial Number: XXXXXXXXXXXXXXX |
| 41 |
Firmware Version: SW100-25 |
| 42 |
User Capacity: 160,041,885,696 bytes |
| 43 |
Device is: In smartctl database [for details use: -P show] |
| 44 |
ATA Version is: 7 |
| 45 |
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 |
| 46 |
Local Time is: Tue Feb 26 15:23:14 2008 CET |
| 47 |
|
| 48 |
==> WARNING: May need -F samsung2 disabled; see manual for details. |
| 49 |
|
| 50 |
SMART support is: Available - device has SMART capability. |
| 51 |
SMART support is: Enabled |
| 52 |
|
| 53 |
=== START OF READ SMART DATA SECTION === |
| 54 |
SMART overall-health self-assessment test result: PASSED |
| 55 |
|
| 56 |
General SMART Values: |
| 57 |
Offline data collection status: (0x80) Offline data collection activity |
| 58 |
~ was never started. |
| 59 |
~ Auto Offline Data Collection: |
| 60 |
Enabled. |
| 61 |
Self-test execution status: ( 244) Self-test routine in progress... |
| 62 |
~ 40% of test remaining. |
| 63 |
Total time to complete Offline |
| 64 |
data collection: (5760) seconds. |
| 65 |
Offline data collection |
| 66 |
capabilities: (0x1b) SMART execute Offline immediate. |
| 67 |
~ Auto Offline data collection |
| 68 |
on/off su |
| 69 |
~ pport. |
| 70 |
~ Suspend Offline collection upon new |
| 71 |
~ command. |
| 72 |
~ Offline surface scan supported. |
| 73 |
~ Self-test supported. |
| 74 |
~ No Conveyance Self-test supported. |
| 75 |
~ No Selective Self-test supported. |
| 76 |
SMART capabilities: (0x0003) Saves SMART data before entering |
| 77 |
~ power-saving mode. |
| 78 |
~ Supports SMART auto save timer. |
| 79 |
Error logging capability: (0x01) Error logging supported. |
| 80 |
~ No General Purpose Logging support. |
| 81 |
Short self-test routine |
| 82 |
recommended polling time: ( 1) minutes. |
| 83 |
Extended self-test routine |
| 84 |
recommended polling time: ( 96) minutes. |
| 85 |
|
| 86 |
SMART Attributes Data Structure revision number: 16 |
| 87 |
Vendor Specific SMART Attributes with Thresholds: |
| 88 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
| 89 |
UPDATED WHE |
| 90 |
~ N_FAILED RAW_VALUE |
| 91 |
~ 1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always |
| 92 |
|
| 93 |
~ - 0 |
| 94 |
~ 3 Spin_Up_Time 0x0007 067 056 000 Pre-fail Always |
| 95 |
|
| 96 |
~ - 5696 |
| 97 |
~ 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always |
| 98 |
|
| 99 |
~ - 3002 |
| 100 |
~ 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always |
| 101 |
|
| 102 |
~ - 0 |
| 103 |
~ 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always |
| 104 |
|
| 105 |
~ - 0 |
| 106 |
~ 8 Seek_Time_Performance 0x0024 253 253 000 Old_age |
| 107 |
Offline |
| 108 |
~ - 0 |
| 109 |
~ 9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always |
| 110 |
|
| 111 |
~ - 2787h+44m |
| 112 |
~ 10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always |
| 113 |
|
| 114 |
~ - 0 |
| 115 |
~ 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always |
| 116 |
|
| 117 |
~ - 1765 |
| 118 |
194 Temperature_Celsius 0x0022 157 085 000 Old_age Always |
| 119 |
|
| 120 |
~ - 27 |
| 121 |
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always |
| 122 |
|
| 123 |
~ - 89102473 |
| 124 |
196 Reallocated_Event_Count 0x0012 100 100 000 Old_age Always |
| 125 |
|
| 126 |
~ - 1 |
| 127 |
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always |
| 128 |
|
| 129 |
~ - 0 |
| 130 |
198 Offline_Uncorrectable 0x0031 100 100 010 Pre-fail |
| 131 |
Offline |
| 132 |
~ - 1 |
| 133 |
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always |
| 134 |
|
| 135 |
~ - 0 |
| 136 |
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always |
| 137 |
|
| 138 |
~ - 0 |
| 139 |
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always |
| 140 |
|
| 141 |
~ - 0 |
| 142 |
|
| 143 |
SMART Error Log Version: 1 |
| 144 |
ATA Error Count: 41728 (device log contains only the most recent five |
| 145 |
errors) |
| 146 |
~ CR = Command Register [HEX] |
| 147 |
~ FR = Features Register [HEX] |
| 148 |
~ SC = Sector Count Register [HEX] |
| 149 |
~ SN = Sector Number Register [HEX] |
| 150 |
~ CL = Cylinder Low Register [HEX] |
| 151 |
~ CH = Cylinder High Register [HEX] |
| 152 |
~ DH = Device/Head Register [HEX] |
| 153 |
~ DC = Device Command Register [HEX] |
| 154 |
~ ER = Error register [HEX] |
| 155 |
~ ST = Status register [HEX] |
| 156 |
Powered_Up_Time is measured from power on, and printed as |
| 157 |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
| 158 |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
| 159 |
|
| 160 |
Error 41728 occurred at disk power-on lifetime: 2153 hours (89 days + 17 |
| 161 |
hours |
| 162 |
~ ) |
| 163 |
~ When the command that caused the error occurred, the device was active |
| 164 |
or id |
| 165 |
~ le. |
| 166 |
|
| 167 |
~ After command completion occurred, registers were: |
| 168 |
~ ER ST SC SN CL CH DH |
| 169 |
~ -- -- -- -- -- -- -- |
| 170 |
~ 40 51 00 26 b1 f0 e0 Error: UNC at LBA = 0x00f0b126 = 15773990 |
| 171 |
|
| 172 |
~ Commands leading to the command that caused the error were: |
| 173 |
~ CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 174 |
~ -- -- -- -- -- -- -- -- ---------------- -------------------- |
| 175 |
~ c8 00 00 26 b1 f0 e0 00 02:52:36.313 READ DMA |
| 176 |
~ c8 00 b8 6e b0 f0 e0 00 02:52:36.313 READ DMA |
| 177 |
~ c8 00 08 8e 83 ef e0 00 02:52:36.313 READ DMA |
| 178 |
~ c8 00 48 26 b0 f0 e0 00 02:52:36.313 READ DMA |
| 179 |
~ c8 00 00 26 af f0 e0 00 02:52:36.313 READ DMA |
| 180 |
|
| 181 |
Error 41727 occurred at disk power-on lifetime: 881 hours (36 days + 17 |
| 182 |
hours) |
| 183 |
~ When the command that caused the error occurred, the device was active |
| 184 |
or id |
| 185 |
~ le. |
| 186 |
|
| 187 |
~ After command completion occurred, registers were: |
| 188 |
~ ER ST SC SN CL CH DH |
| 189 |
~ -- -- -- -- -- -- -- |
| 190 |
~ 40 51 00 77 b1 f0 e0 Error: UNC at LBA = 0x00f0b177 = 15774071 |
| 191 |
|
| 192 |
~ Commands leading to the command that caused the error were: |
| 193 |
~ CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 194 |
~ -- -- -- -- -- -- -- -- ---------------- -------------------- |
| 195 |
~ c8 00 00 77 b1 f0 e0 00 02:58:46.188 READ DMA |
| 196 |
~ ec 00 00 00 00 00 a0 00 02:58:46.188 IDENTIFY DEVICE |
| 197 |
~ ef 03 46 00 00 00 a0 00 02:58:46.188 SET FEATURES [Set transfer |
| 198 |
mode] |
| 199 |
~ ec 00 00 00 00 00 a0 00 02:58:46.188 IDENTIFY DEVICE |
| 200 |
|
| 201 |
Error 41726 occurred at disk power-on lifetime: 881 hours (36 days + 17 |
| 202 |
hours) |
| 203 |
~ When the command that caused the error occurred, the device was active |
| 204 |
or id |
| 205 |
~ le. |
| 206 |
|
| 207 |
~ After command completion occurred, registers were: |
| 208 |
~ ER ST SC SN CL CH DH |
| 209 |
~ -- -- -- -- -- -- -- |
| 210 |
~ 40 51 00 77 b1 f0 e0 Error: UNC at LBA = 0x00f0b177 = 15774071 |
| 211 |
|
| 212 |
~ Commands leading to the command that caused the error were: |
| 213 |
~ CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 214 |
~ -- -- -- -- -- -- -- -- ---------------- -------------------- |
| 215 |
~ c8 00 00 77 b1 f0 e0 00 02:58:45.125 READ DMA |
| 216 |
~ ec 00 00 00 00 00 a0 00 02:58:45.125 IDENTIFY DEVICE |
| 217 |
~ ef 03 46 00 00 00 a0 00 02:58:45.125 SET FEATURES [Set transfer |
| 218 |
mode] |
| 219 |
~ ec 00 00 00 00 00 a0 00 02:58:45.125 IDENTIFY DEVICE |
| 220 |
|
| 221 |
Error 41725 occurred at disk power-on lifetime: 881 hours (36 days + 17 |
| 222 |
hours) |
| 223 |
~ When the command that caused the error occurred, the device was active |
| 224 |
or id |
| 225 |
~ le. |
| 226 |
|
| 227 |
~ After command completion occurred, registers were: |
| 228 |
~ ER ST SC SN CL CH DH |
| 229 |
~ -- -- -- -- -- -- -- |
| 230 |
~ 40 51 00 77 b1 f0 e0 Error: UNC at LBA = 0x00f0b177 = 15774071 |
| 231 |
|
| 232 |
~ Commands leading to the command that caused the error were: |
| 233 |
~ CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 234 |
~ -- -- -- -- -- -- -- -- ---------------- -------------------- |
| 235 |
~ c8 00 00 77 b1 f0 e0 00 02:58:44.125 READ DMA |
| 236 |
~ ec 00 00 00 00 00 a0 00 02:58:44.125 IDENTIFY DEVICE |
| 237 |
~ ef 03 46 00 00 00 a0 00 02:58:44.125 SET FEATURES [Set transfer |
| 238 |
mode] |
| 239 |
~ ec 00 00 00 00 00 a0 00 02:58:44.125 IDENTIFY DEVICE |
| 240 |
|
| 241 |
Error 41724 occurred at disk power-on lifetime: 881 hours (36 days + 17 |
| 242 |
hours) |
| 243 |
~ When the command that caused the error occurred, the device was active |
| 244 |
or id |
| 245 |
~ le. |
| 246 |
|
| 247 |
~ After command completion occurred, registers were: |
| 248 |
~ ER ST SC SN CL CH DH |
| 249 |
~ -- -- -- -- -- -- -- |
| 250 |
~ 40 51 00 77 b1 f0 e0 Error: UNC at LBA = 0x00f0b177 = 15774071 |
| 251 |
|
| 252 |
~ Commands leading to the command that caused the error were: |
| 253 |
~ CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 254 |
~ -- -- -- -- -- -- -- -- ---------------- -------------------- |
| 255 |
~ c8 00 00 77 b1 f0 e0 00 02:58:43.063 READ DMA |
| 256 |
~ ec 00 00 00 00 00 a0 00 02:58:43.063 IDENTIFY DEVICE |
| 257 |
~ ef 03 46 00 00 00 a0 00 02:58:43.063 SET FEATURES [Set transfer |
| 258 |
mode] |
| 259 |
~ ec 00 00 00 00 00 a0 00 02:58:43.063 IDENTIFY DEVICE |
| 260 |
|
| 261 |
SMART Self-test log structure revision number 1 |
| 262 |
Num Test_Description Status Remaining |
| 263 |
LifeTime(hours) L |
| 264 |
~ BA_of_first_error |
| 265 |
# 1 Short offline Completed without error 00% 2786 |
| 266 |
~ - |
| 267 |
# 2 Short offline Completed without error 00% 2777 |
| 268 |
~ - |
| 269 |
# 3 Short offline Completed without error 00% 2777 |
| 270 |
~ - |
| 271 |
# 4 Short offline Completed without error 00% 2776 |
| 272 |
~ - |
| 273 |
# 5 Short offline Completed without error 00% 2714 |
| 274 |
~ - |
| 275 |
# 6 Short offline Completed without error 00% 2700 |
| 276 |
~ - |
| 277 |
# 7 Short offline Completed without error 00% 2693 |
| 278 |
~ - |
| 279 |
# 8 Short offline Completed without error 00% 2687 |
| 280 |
~ - |
| 281 |
# 9 Extended offline Completed without error 00% 2676 |
| 282 |
~ - |
| 283 |
#10 Short offline Completed without error 00% 2662 |
| 284 |
~ - |
| 285 |
#11 Short offline Completed without error 00% 2653 |
| 286 |
~ - |
| 287 |
#12 Short offline Completed without error 00% 2652 |
| 288 |
~ - |
| 289 |
#13 Short offline Completed without error 00% 2637 |
| 290 |
~ - |
| 291 |
#14 Short offline Completed without error 00% 2622 |
| 292 |
~ - |
| 293 |
#15 Short offline Completed without error 00% 2611 |
| 294 |
~ - |
| 295 |
#16 Short offline Completed without error 00% 2598 |
| 296 |
~ - |
| 297 |
#17 Extended offline Completed without error 00% 2585 |
| 298 |
~ - |
| 299 |
#18 Short offline Completed without error 00% 2570 |
| 300 |
~ - |
| 301 |
#19 Short offline Completed without error 00% 2557 |
| 302 |
~ - |
| 303 |
#20 Short offline Completed without error 00% 2541 |
| 304 |
~ - |
| 305 |
#21 Short offline Completed without error 00% 2529 |
| 306 |
~ - |
| 307 |
|
| 308 |
Device does not support Selective Self Tests/Logging |
| 309 |
|
| 310 |
- -- |
| 311 |
email@×××××.de - GnuPG Key-ID: 0x1489FF7D |
| 312 |
-----BEGIN PGP SIGNATURE----- |
| 313 |
Version: GnuPG v2.0.7 (GNU/Linux) |
| 314 |
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org |
| 315 |
|
| 316 |
iD8DBQFHxCEzeWPEmRSJ/30RAztNAJ9Y/uxe2IZdxghYmJThFG+hcci8dQCfdWvh |
| 317 |
SpC/qjxbJTchPfCHOWMQcYg= |
| 318 |
=IzaO |
| 319 |
-----END PGP SIGNATURE----- |
| 320 |
-- |
| 321 |
gentoo-user-de@l.g.o mailing list |
Archives