| 1 |
Hallo zusammen, |
| 2 |
|
| 3 |
ich habe heute den Kernel auf 2.6.12-r10 upgedated. Dabei tritt nun folgende |
| 4 |
Fehlermeldung beim Booten auf: |
| 5 |
|
| 6 |
Probing IDE interface ide1... |
| 7 |
hdc: CD-224E, ATAPI CD/DVD-ROM drive |
| 8 |
irq 15: nobody cared (try booting with the "irqpoll" option) |
| 9 |
[<c013a2ca>] __report_bad_irq+0x2a/0xa0 |
| 10 |
[<c013a3e0>] note_interrupt+0x80/0xf0 |
| 11 |
[<c0139ca8>] __do_IRQ+0x118/0x130 |
| 12 |
[<c0104f69>] do_IRQ+0x19/0x30 |
| 13 |
[<c0103352>] common_interrupt+0x1a/0x20 |
| 14 |
[<c011c95e>] __do_softirq+0x2e/0x90 |
| 15 |
[<c011c9e6>] do_softirq+0x26/0x30 |
| 16 |
[<c011cab5>] irq_exit+0x35/0x40 |
| 17 |
[<c0104f6e>] do_IRQ+0x1e/0x30 |
| 18 |
[<c0103352>] common_interrupt+0x1a/0x20 |
| 19 |
[<c014007b>] __alloc_pages+0x3b/0x430 |
| 20 |
[<c0139f32>] setup_irq+0xb2/0x130 |
| 21 |
[<c03327d0>] ide_intr+0x0/0x1a0 |
| 22 |
[<c013a142>] request_irq+0x82/0xa0 |
| 23 |
[<c03327d0>] ide_intr+0x0/0x1a0 |
| 24 |
[<c033684d>] init_irq+0x17d/0x470 |
| 25 |
[<c03327d0>] ide_intr+0x0/0x1a0 |
| 26 |
[<c033705d>] hwif_init+0xdd/0x260 |
| 27 |
[<c0336456>] probe_hwif_init_with_fixup+0x26/0xa0 |
| 28 |
[<c0339d72>] ide_setup_pci_device+0x92/0xb0 |
| 29 |
[<c05de8ad>] ide_scan_pcidev+0x5d/0x70 |
| 30 |
[<c05de907>] ide_scan_pcibus+0x47/0xd0 |
| 31 |
[<c05de1c0>] probe_for_hwifs+0x10/0x20 |
| 32 |
[<c05de22c>] ide_init+0x5c/0x70 |
| 33 |
[<c05c288b>] do_initcalls+0x2b/0xc0 |
| 34 |
[<c01002b0>] init+0x0/0x110 |
| 35 |
[<c01002b0>] init+0x0/0x110 |
| 36 |
[<c01002da>] init+0x2a/0x110 |
| 37 |
[<c0101348>] kernel_thread_helper+0x0/0x18 |
| 38 |
[<c010134d>] kernel_thread_helper+0x5/0x18 |
| 39 |
handlers: |
| 40 |
[<c03327d0>] (ide_intr+0x0/0x1a0) |
| 41 |
Disabling IRQ #15 |
| 42 |
ide1 at 0x170-0x177,0x376 on irq 15 |
| 43 |
Probing IDE interface ide2... |
| 44 |
Probing IDE interface ide3... |
| 45 |
Probing IDE interface ide4... |
| 46 |
Probing IDE interface ide5... |
| 47 |
hda: max request size: 128KiB |
| 48 |
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(33) |
| 49 |
hda: cache flushes not supported |
| 50 |
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > |
| 51 |
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) |
| 52 |
Uniform CD-ROM driver Revision: 3.20 |
| 53 |
ide-floppy driver 0.99.newide |
| 54 |
libata version 1.11 loaded. |
| 55 |
|
| 56 |
ich habe irqpoll mal als Kernel Option angegeben und konnte wenigstens ohne |
| 57 |
weitere Probleme starten. |
| 58 |
|
| 59 |
Woher kommt denn nun diese Fehlermeldung? |
| 60 |
Und was kann ich dagegen machen, bzw. wie kann ich das reparieren? |
| 61 |
|
| 62 |
Thx |
| 63 |
Christian |
| 64 |
-- |
| 65 |
gentoo-user-de@g.o mailing list |
Archives