1 |
Moin |
2 |
|
3 |
Ich habe hier ein mehr oder weniger interessantes Problem, weil ich es mir |
4 |
beim besten willen nicht erklären kann. |
5 |
Benutze ich irgendeinen Kernel höher als 2.6.6 wird der PC nach 14-18 |
6 |
Stunden schlagartig extrem langsam, z.b. dauert ein Login auf der Console |
7 |
1-2 Minuten, aufrufen von top dauert dann nochmal ne minute - usw. Der |
8 |
ganze PC lässt sich dann nicht mal mehr runterfahren, sondern muss |
9 |
ausgeschalten werden (habs mal 30mins runterfahren lassen und er hat |
10 |
nichtmal die init scripts stoppen können) |
11 |
|
12 |
Natürlich habe ich bereits meine Logfiles und DMESG abgegrast - aber |
13 |
absolut nichts gefunden. |
14 |
Mit dem Kernel 2.6.6 läuft der PC Wochenlang. |
15 |
|
16 |
Ich habe bereits versucht Plug and Play im Bios zu deaktivieren, nen |
17 |
anderen NIC Treiber zu nehmen, den Kernel ohne "Preemptible Kernel" mal |
18 |
mit 4K mal mit 8K Stacks, ne andere Grafikkarte ... |
19 |
Alles ohne Erfolg. |
20 |
|
21 |
Wenn euch was einfällt bin ich froh :) |
22 |
|
23 |
Hardware is wie folgt: |
24 |
IBM ThinkCentre Typ: 8187-EGG |
25 |
CPU: P4 2,8HT |
26 |
Graka: Matrox G400 und testweise GF2MX |
27 |
|
28 |
lspci: |
29 |
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub |
30 |
Interface (rev 02) |
31 |
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller |
32 |
(rev 02) |
33 |
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI |
34 |
#1 (rev 02) |
35 |
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI |
36 |
#2 (rev 02) |
37 |
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI |
38 |
#3 (rev 02) |
39 |
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI |
40 |
#4 (rev 02) |
41 |
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI |
42 |
Controller (rev 02) |
43 |
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) |
44 |
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge |
45 |
(rev 02) |
46 |
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA |
47 |
100 Storage Controller (rev 02) |
48 |
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller |
49 |
(rev 02) |
50 |
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER |
51 |
(ICH5/ICH5R) AC'97 Audio Controller (rev 02) |
52 |
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP |
53 |
(rev 03) |
54 |
0000:03:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet |
55 |
Controller (rev 02) |
56 |
|
57 |
lsmod: |
58 |
Module Size Used by |
59 |
mga 104148 2 |
60 |
usbhid 22912 0 |
61 |
ohci_hcd 17412 0 |
62 |
e100 30592 0 (hab auch mal den eepro100 versucht) |
63 |
ehci_hcd 24708 0 |
64 |
uhci_hcd 28176 0 |
65 |
intel_agp 15132 1 |
66 |
agpgart 26284 2 intel_agp |
67 |
snd_pcm_oss 46632 0 |
68 |
snd_mixer_oss 16896 1 snd_pcm_oss |
69 |
snd_intel8x0 29064 1 |
70 |
snd_ac97_codec 58500 1 snd_intel8x0 |
71 |
snd_pcm 82948 2 snd_pcm_oss,snd_intel8x0 |
72 |
snd_timer 22532 1 snd_pcm |
73 |
snd_page_alloc 9480 2 snd_intel8x0,snd_pcm |
74 |
snd_mpu401_uart 6912 1 snd_intel8x0 |
75 |
snd_rawmidi 20644 1 snd_mpu401_uart |
76 |
snd_seq_device 7304 1 snd_rawmidi |
77 |
snd 47460 11 |
78 |
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device |
79 |
soundcore 8416 1 snd |
80 |
|
81 |
dmesg: |
82 |
20: 00000000ff800000 - 0000000100000000 (reserved) |
83 |
0MB HIGHMEM available. |
84 |
511MB LOWMEM available. |
85 |
found SMP MP-table at 000f64e0 |
86 |
On node 0 totalpages: 130928 |
87 |
DMA zone: 4096 pages, LIFO batch:1 |
88 |
Normal zone: 126832 pages, LIFO batch:16 |
89 |
HighMem zone: 0 pages, LIFO batch:1 |
90 |
DMI present. |
91 |
IBM machine detected. Enabling interrupts during APM calls. |
92 |
IBM machine detected. Disabling SMBus accesses. |
93 |
ACPI: RSDP (v000 PTLTD ) @ 0x000f65a0 |
94 |
ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x1ff750c7 |
95 |
ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x1ff79e9d |
96 |
ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x1ff79f11 |
97 |
ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ |
98 |
0x1ff79f43 |
99 |
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x1ff79fa1 |
100 |
ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x1ff79fc9 |
101 |
ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000 |
102 |
ACPI: PM-Timer IO Port: 0x1008 |
103 |
ACPI: Local APIC address 0xfee00000 |
104 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
105 |
Processor #0 15:2 APIC version 20 |
106 |
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
107 |
Processor #1 15:2 APIC version 20 |
108 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
109 |
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
110 |
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) |
111 |
IOAPIC[0]: Assigned apic_id 2 |
112 |
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
113 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
114 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
115 |
Using ACPI (MADT) for SMP configuration information |
116 |
Built 1 zonelists |
117 |
Initializing CPU#0 |
118 |
Kernel command line: root=/dev/md1 md=0,/dev/hda1,/dev/hdc1 |
119 |
md=1,/dev/hda3,/dev/hdc3 |
120 |
md: Will configure md0 (super-block) from /dev/hda1,/dev/hdc1, below. |
121 |
md: Will configure md1 (super-block) from /dev/hda3,/dev/hdc3, below. |
122 |
CPU 0 irqstacks, hard=c0420000 soft=c0418000 |
123 |
PID hash table entries: 2048 (order 11: 16384 bytes) |
124 |
Detected 2792.871 MHz processor. |
125 |
Using pmtmr for high-res timesource |
126 |
Console: colour VGA+ 80x25 |
127 |
Memory: 515032k/523712k available (2079k kernel code, 7912k reserved, 897k |
128 |
data, 164k init, 0k highmem) |
129 |
Checking if this processor honours the WP bit even in supervisor mode... |
130 |
Ok. |
131 |
Calibrating delay loop... 5537.79 BogoMIPS |
132 |
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
133 |
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
134 |
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) |
135 |
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 |
136 |
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 |
137 |
CPU: Trace cache: 12K uops, L1 D cache: 8K |
138 |
CPU: L2 cache: 512K |
139 |
CPU: Physical Processor ID: 0 |
140 |
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 |
141 |
Intel machine check architecture supported. |
142 |
Intel machine check reporting enabled on CPU#0. |
143 |
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available |
144 |
CPU0: Thermal monitoring enabled |
145 |
Enabling fast FPU save and restore... done. |
146 |
Enabling unmasked SIMD FPU exception support... done. |
147 |
Checking 'hlt' instruction... OK. |
148 |
POSIX conformance testing by UNIFIX |
149 |
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 |
150 |
per-CPU timeslice cutoff: 1463.09 usecs. |
151 |
task migration cache decay timeout: 2 msecs. |
152 |
enabled ExtINT on CPU#0 |
153 |
ESR value before enabling vector: 00000000 |
154 |
ESR value after enabling vector: 00000000 |
155 |
Booting processor 1/1 eip 3000 |
156 |
CPU 1 irqstacks, hard=c0421000 soft=c0419000 |
157 |
Initializing CPU#1 |
158 |
masked ExtINT on CPU#1 |
159 |
ESR value before enabling vector: 00000000 |
160 |
ESR value after enabling vector: 00000000 |
161 |
Calibrating delay loop... 5570.56 BogoMIPS |
162 |
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 |
163 |
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 |
164 |
CPU: Trace cache: 12K uops, L1 D cache: 8K |
165 |
CPU: L2 cache: 512K |
166 |
CPU: Physical Processor ID: 0 |
167 |
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 |
168 |
Intel machine check architecture supported. |
169 |
Intel machine check reporting enabled on CPU#1. |
170 |
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available |
171 |
CPU1: Thermal monitoring enabled |
172 |
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 |
173 |
Total of 2 processors activated (11108.35 BogoMIPS). |
174 |
ENABLING IO-APIC IRQs |
175 |
init IO_APIC IRQs |
176 |
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not |
177 |
connected. |
178 |
..TIMER: vector=0x31 pin1=0 pin2=-1 |
179 |
Using local APIC timer interrupts. |
180 |
calibrating APIC timer ... |
181 |
..... CPU clock speed is 2792.0591 MHz. |
182 |
..... host bus clock speed is 199.0470 MHz. |
183 |
checking TSC synchronization across 2 CPUs: passed. |
184 |
Brought up 2 CPUs |
185 |
CPU0: online |
186 |
domain 0: span 03 |
187 |
groups: 01 02 |
188 |
domain 1: span 03 |
189 |
groups: 03 |
190 |
CPU1: online |
191 |
domain 0: span 03 |
192 |
groups: 02 01 |
193 |
domain 1: span 03 |
194 |
groups: 03 |
195 |
NET: Registered protocol family 16 |
196 |
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3 |
197 |
PCI: Using configuration type 1 |
198 |
mtrr: v2.0 (20020519) |
199 |
ACPI: Subsystem revision 20040326 |
200 |
ACPI: Interpreter enabled |
201 |
ACPI: Using IOAPIC for interrupt routing |
202 |
ACPI: PCI Root Bridge [PCI0] (00:00) |
203 |
PCI: Probing PCI hardware (bus 00) |
204 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 |
205 |
PCI: Transparent bridge - 0000:00:1e.0 |
206 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
207 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] |
208 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) |
209 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) |
210 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) |
211 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) |
212 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15) |
213 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, |
214 |
disabled. |
215 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, |
216 |
disabled. |
217 |
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) |
218 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] |
219 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
220 |
SCSI subsystem initialized |
221 |
usbcore: registered new driver hub |
222 |
00:00:1f[A] -> 2-18 -> IRQ 18 level low |
223 |
00:00:1f[B] -> 2-17 -> IRQ 17 level low |
224 |
00:00:1d[A] -> 2-16 -> IRQ 16 level low |
225 |
00:00:1d[B] -> 2-19 -> IRQ 19 level low |
226 |
00:00:1d[D] -> 2-23 -> IRQ 23 level low |
227 |
00:03:0a[A] -> 2-22 -> IRQ 22 level low |
228 |
00:03:0a[C] -> 2-20 -> IRQ 20 level low |
229 |
00:03:0a[D] -> 2-21 -> IRQ 21 level low |
230 |
number of MP IRQ sources: 16. |
231 |
number of IO-APIC #2 registers: 24. |
232 |
testing the IO APIC....................... |
233 |
IO APIC #2...... |
234 |
.... register #00: 02000000 |
235 |
....... : physical APIC id: 02 |
236 |
....... : Delivery Type: 0 |
237 |
....... : LTS : 0 |
238 |
.... register #01: 00178020 |
239 |
....... : max redirection entries: 0017 |
240 |
....... : PRQ implemented: 1 |
241 |
....... : IO APIC version: 0020 |
242 |
.... IRQ redirection table: |
243 |
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: |
244 |
00 0FF 0F 0 0 0 0 0 1 1 31 |
245 |
01 0FF 0F 0 0 0 0 0 1 1 39 |
246 |
02 0FF 0F 1 0 0 0 0 1 1 41 |
247 |
03 0FF 0F 0 0 0 0 0 1 1 49 |
248 |
04 0FF 0F 0 0 0 0 0 1 1 51 |
249 |
05 0FF 0F 0 0 0 0 0 1 1 59 |
250 |
06 0FF 0F 0 0 0 0 0 1 1 61 |
251 |
07 0FF 0F 0 0 0 0 0 1 1 69 |
252 |
08 0FF 0F 0 0 0 0 0 1 1 71 |
253 |
09 0FF 0F 0 1 0 0 0 1 1 79 |
254 |
0a 0FF 0F 0 0 0 0 0 1 1 81 |
255 |
0b 0FF 0F 0 0 0 0 0 1 1 89 |
256 |
0c 0FF 0F 0 0 0 0 0 1 1 91 |
257 |
0d 0FF 0F 0 0 0 0 0 1 1 99 |
258 |
0e 0FF 0F 0 0 0 0 0 1 1 A1 |
259 |
0f 0FF 0F 0 0 0 0 0 1 1 A9 |
260 |
10 003 03 1 1 0 1 0 1 1 C1 |
261 |
11 003 03 1 1 0 1 0 1 1 B9 |
262 |
12 003 03 1 1 0 1 0 1 1 B1 |
263 |
13 003 03 1 1 0 1 0 1 1 C9 |
264 |
14 003 03 1 1 0 1 0 1 1 E1 |
265 |
15 003 03 1 1 0 1 0 1 1 E9 |
266 |
16 003 03 1 1 0 1 0 1 1 D9 |
267 |
17 003 03 1 1 0 1 0 1 1 D1 |
268 |
IRQ to pin mappings: |
269 |
IRQ0 -> 0:0 |
270 |
IRQ1 -> 0:1 |
271 |
IRQ2 -> 0:2 |
272 |
IRQ3 -> 0:3 |
273 |
IRQ4 -> 0:4 |
274 |
IRQ5 -> 0:5 |
275 |
IRQ6 -> 0:6 |
276 |
IRQ7 -> 0:7 |
277 |
IRQ8 -> 0:8 |
278 |
IRQ9 -> 0:9 |
279 |
IRQ10 -> 0:10 |
280 |
IRQ11 -> 0:11 |
281 |
IRQ12 -> 0:12 |
282 |
IRQ13 -> 0:13 |
283 |
IRQ14 -> 0:14 |
284 |
IRQ15 -> 0:15 |
285 |
IRQ16 -> 0:16 |
286 |
IRQ17 -> 0:17 |
287 |
IRQ18 -> 0:18 |
288 |
IRQ19 -> 0:19 |
289 |
IRQ20 -> 0:20 |
290 |
IRQ21 -> 0:21 |
291 |
IRQ22 -> 0:22 |
292 |
IRQ23 -> 0:23 |
293 |
.................................... done. |
294 |
PCI: Using ACPI for IRQ routing |
295 |
Simple Boot Flag at 0x35 set to 0x1 |
296 |
Machine check exception polling timer started. |
297 |
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) |
298 |
apm: disabled - APM is not SMP safe. |
299 |
Starting balanced_irq |
300 |
devfs: 2004-01-31 Richard Gooch (rgooch@××××××××××.au) |
301 |
devfs: boot_options: 0x1 |
302 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
303 |
udf: registering filesystem |
304 |
ACPI: Power Button (FF) [PWRF] |
305 |
ACPI: Processor [CPU0] (supports C1, 8 throttling states) |
306 |
ACPI: Processor [CPU1] (supports C1, 8 throttling states) |
307 |
ACPI: Thermal Zone [THM0] (65 C) |
308 |
Real Time Clock Driver v1.12 |
309 |
Non-volatile memory driver v1.2 |
310 |
hw_random: RNG not detected |
311 |
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled |
312 |
Using anticipatory io scheduler |
313 |
Floppy drive(s): fd0 is 1.44M |
314 |
FDC 0 is a post-1991 82077 |
315 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
316 |
ide: Assuming 33MHz system bus speed for PIO modes; override with |
317 |
idebus=xx |
318 |
ICH5: IDE controller at PCI slot 0000:00:1f.1 |
319 |
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) |
320 |
ICH5: chipset revision 2 |
321 |
ICH5: not 100% native mode: will probe irqs later |
322 |
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:pio |
323 |
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:pio |
324 |
hda: HDS722580VLAT20, ATA DISK drive |
325 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
326 |
hdc: ST340014A, ATA DISK drive |
327 |
hdd: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive |
328 |
ide1 at 0x170-0x177,0x376 on irq 15 |
329 |
hda: max request size: 1024KiB |
330 |
hda: 120103200 sectors (61492 MB) w/1794KiB Cache, CHS=16383/255/63, |
331 |
UDMA(100) |
332 |
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 |
333 |
hdc: max request size: 1024KiB |
334 |
hdc: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=16383/255/63, |
335 |
UDMA(100) |
336 |
/dev/ide/host0/bus1/target0/lun0: p1 p2 p3 |
337 |
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) |
338 |
Uniform CD-ROM driver Revision: 3.20 |
339 |
mice: PS/2 mouse device common for all mice |
340 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
341 |
input: PS/2 Generic Mouse on isa0060/serio1 |
342 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
343 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
344 |
md: linear personality registered as nr 1 |
345 |
md: raid0 personality registered as nr 2 |
346 |
md: raid1 personality registered as nr 3 |
347 |
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 |
348 |
NET: Registered protocol family 2 |
349 |
IP: routing cache hash table of 4096 buckets, 32Kbytes |
350 |
TCP: Hash tables configured (established 32768 bind 32768) |
351 |
NET: Registered protocol family 1 |
352 |
NET: Registered protocol family 17 |
353 |
ACPI: (supports S0 S1 S3 S4 S5) |
354 |
md: Autodetecting RAID arrays. |
355 |
md: autorun ... |
356 |
md: ... autorun DONE. |
357 |
md: Loading md0: /dev/hda1 |
358 |
md: bind<hda1> |
359 |
md: bind<hdc1> |
360 |
raid1: raid set md0 active with 2 out of 2 mirrors |
361 |
md: Loading md1: /dev/hda3 |
362 |
md: bind<hda3> |
363 |
md: bind<hdc3> |
364 |
md: md1: raid array is not clean -- starting background reconstruction |
365 |
raid1: raid set md1 active with 2 out of 2 mirrors |
366 |
md: syncing RAID array md1 |
367 |
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. |
368 |
md: using maximum available idle IO bandwith (but not more than 200000 |
369 |
KB/sec) for reconstruction. |
370 |
md: using 128k window, over a total of 35158144 blocks. |
371 |
ReiserFS: md1: found reiserfs format "3.6" with standard journal |
372 |
ReiserFS: md1: using ordered data mode |
373 |
ReiserFS: md1: journal params: device md1, size 8192, journal first block |
374 |
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 |
375 |
ReiserFS: md1: checking transaction log (md1) |
376 |
ReiserFS: md1: Using r5 hash to sort names |
377 |
VFS: Mounted root (reiserfs filesystem) readonly. |
378 |
Mounted devfs on /dev |
379 |
Freeing unused kernel memory: 164k freed |
380 |
Adding 996020k swap on /dev/hdc2. Priority:-1 extents:1 |
381 |
Adding 996020k swap on /dev/hda2. Priority:-2 extents:1 |
382 |
PCI: Setting latency timer of device 0000:00:1f.5 to 64 |
383 |
intel8x0_measure_ac97_clock: measured 49561 usecs |
384 |
intel8x0: clocking to 48000 |
385 |
ReiserFS: hda4: found reiserfs format "3.6" with standard journal |
386 |
ReiserFS: hda4: using ordered data mode |
387 |
ReiserFS: hda4: journal params: device hda4, size 8192, journal first |
388 |
block 18, max trans len 1024, max batch 900, max commit age 30, max trans |
389 |
age 30 |
390 |
ReiserFS: hda4: checking transaction log (hda4) |
391 |
ReiserFS: hda4: Using r5 hash to sort names |
392 |
Linux agpgart interface v0.100 (c) Dave Jones |
393 |
agpgart: Detected an Intel 865 Chipset. |
394 |
agpgart: Maximum main memory to use for agp memory: 439M |
395 |
agpgart: AGP aperture is 32M @ 0xfa000000 |
396 |
USB Universal Host Controller Interface driver v2.2 |
397 |
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 |
398 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
399 |
uhci_hcd 0000:00:1d.0: irq 16, io base 00001800 |
400 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 |
401 |
hub 1-0:1.0: USB hub found |
402 |
hub 1-0:1.0: 2 ports detected |
403 |
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 |
404 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
405 |
uhci_hcd 0000:00:1d.1: irq 19, io base 00001820 |
406 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 |
407 |
hub 2-0:1.0: USB hub found |
408 |
hub 2-0:1.0: 2 ports detected |
409 |
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 |
410 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
411 |
uhci_hcd 0000:00:1d.2: irq 18, io base 00001840 |
412 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 |
413 |
hub 3-0:1.0: USB hub found |
414 |
hub 3-0:1.0: 2 ports detected |
415 |
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 |
416 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
417 |
uhci_hcd 0000:00:1d.3: irq 16, io base 00001860 |
418 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 |
419 |
hub 4-0:1.0: USB hub found |
420 |
hub 4-0:1.0: 2 ports detected |
421 |
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI |
422 |
Controller |
423 |
PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
424 |
ehci_hcd 0000:00:1d.7: irq 23, pci mem e0aee000 |
425 |
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 |
426 |
PCI: cache line size of 128 is not supported by device 0000:00:1d.7 |
427 |
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 |
428 |
hub 5-0:1.0: USB hub found |
429 |
hub 5-0:1.0: 8 ports detected |
430 |
e100: Intel(R) PRO/100 Network Driver, 3.0.17 |
431 |
e100: Copyright(c) 1999-2004 Intel Corporation |
432 |
e100: eth0: e100_probe: addr 0xf9000000, irq 20, MAC addr |
433 |
00:09:6B:07:B4:DF |
434 |
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
435 |
ohci_hcd: block sizes: ed 64 td 64 |
436 |
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex |
437 |
usb 2-1: new low speed USB device using address 2 |
438 |
chmp: HID Mouse "0x39" forced to 2 ms polling |
439 |
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with |
440 |
IntelliEye(TM)] on usb-0000:00:1d.1-1 |
441 |
usbcore: registered new driver hid |
442 |
drivers/usb/input/hid-core.c: v2.0:USB HID core driver |
443 |
[drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox Graphics, Inc. MGA |
444 |
G400 AGP |
445 |
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. |
446 |
agpgart: Device is in legacy mode, falling back to 2.x |
447 |
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode |
448 |
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode |
449 |
|
450 |
mfg MER |
451 |
|
452 |
-- |
453 |
gentoo-user-de@g.o mailing list |