1 |
Hier die angekündigte Ausgabe von dmesg: |
2 |
|
3 |
Linux version 2.6.17-gentoo-r8 (root@r1-gentoo) (gcc version 4.1.1 (Gentoo |
4 |
4.1.1)) #6 SMP Thu Oct 19 22:26:27 CEST 2006 |
5 |
BIOS-provided physical RAM map: |
6 |
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
7 |
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
8 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
9 |
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) |
10 |
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) |
11 |
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) |
12 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
13 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
14 |
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) |
15 |
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) |
16 |
255MB LOWMEM available. |
17 |
On node 0 totalpages: 65520 |
18 |
DMA zone: 4096 pages, LIFO batch:0 |
19 |
Normal zone: 61424 pages, LIFO batch:15 |
20 |
DMI 2.3 present. |
21 |
ACPI: RSDP (v000 AMI ) @ 0x000fa340 |
22 |
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x0fff0000 |
23 |
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x0fff0030 |
24 |
ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 |
25 |
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) |
26 |
Built 1 zonelists |
27 |
Kernel command line: root=/dev/hda5 |
28 |
Local APIC disabled by BIOS -- you can enable it with "lapic" |
29 |
mapped APIC to ffffd000 (01209000) |
30 |
Enabling fast FPU save and restore... done. |
31 |
Initializing CPU#0 |
32 |
CPU 0 irqstacks, hard=c0424000 soft=c041c000 |
33 |
PID hash table entries: 1024 (order: 10, 4096 bytes) |
34 |
Detected 1244.907 MHz processor. |
35 |
Using tsc for high-res timesource |
36 |
Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized |
37 |
Console: colour VGA+ 80x25 |
38 |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
39 |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
40 |
Memory: 255856k/262080k available (2366k kernel code, 5764k reserved, 583k |
41 |
data, 192k init, 0k highmem) |
42 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
43 |
Calibrating delay using timer specific routine.. 2492.72 BogoMIPS |
44 |
(lpj=4985458) |
45 |
Mount-cache hash table entries: 512 |
46 |
CPU: After generic identify, caps: 0183f9ff c1c3f9ff 00000000 00000000 |
47 |
00000000 00000000 00000000 |
48 |
CPU: After vendor identify, caps: 0183f9ff c1c3f9ff 00000000 00000000 00000000 |
49 |
00000000 00000000 |
50 |
Enabling disabled K7/SSE Support. |
51 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
52 |
CPU: L2 Cache: 256K (64 bytes/line) |
53 |
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 |
54 |
00000000 00000000 |
55 |
Checking 'hlt' instruction... OK. |
56 |
SMP alternatives: switching to UP code |
57 |
Freeing SMP alternatives: 16k freed |
58 |
ACPI: setting ELCR to 0200 (from 0820) |
59 |
CPU0: AMD Athlon(tm) Processor stepping 00 |
60 |
SMP motherboard not detected. |
61 |
Local APIC not detected. Using dummy APIC emulation. |
62 |
Brought up 1 CPUs |
63 |
migration_cost=0 |
64 |
NET: Registered protocol family 16 |
65 |
EISA bus registered |
66 |
ACPI: bus type pci registered |
67 |
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 |
68 |
Setting up standard PCI resources |
69 |
ACPI: Subsystem revision 20060127 |
70 |
ACPI: Interpreter enabled |
71 |
ACPI: Using PIC for interrupt routing |
72 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
73 |
PCI: Probing PCI hardware (bus 00) |
74 |
Uncovering SIS18 that hid as a SIS503 (compatible=1) |
75 |
Enabling SiS 96x SMBus. |
76 |
Boot video device is 0000:01:00.0 |
77 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
78 |
ACPI: Power Resource [URP1] (off) |
79 |
ACPI: Power Resource [URP2] (off) |
80 |
ACPI: Power Resource [FDDP] (off) |
81 |
ACPI: Power Resource [LPTP] (off) |
82 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) |
83 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
84 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) |
85 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) |
86 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
87 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
88 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. |
89 |
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) |
90 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
91 |
pnp: PnP ACPI init |
92 |
pnp: PnP ACPI: found 13 devices |
93 |
SCSI subsystem initialized |
94 |
PCI: Using ACPI for IRQ routing |
95 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
96 |
PCI: Bridge: 0000:00:01.0 |
97 |
IO window: disabled. |
98 |
MEM window: cde00000-cfefffff |
99 |
PREFETCH window: cbc00000-cdcfffff |
100 |
NET: Registered protocol family 2 |
101 |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
102 |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
103 |
TCP bind hash table entries: 4096 (order: 3, 32768 bytes) |
104 |
TCP: Hash tables configured (established 8192 bind 4096) |
105 |
TCP reno registered |
106 |
audit: initializing netlink socket (disabled) |
107 |
audit(1162407356.388:1): initialized |
108 |
squashfs: version 3.0 (2006/03/15) Phillip Lougher |
109 |
SGI XFS with ACLs, security attributes, realtime, large block numbers, no |
110 |
debug enabled |
111 |
SGI XFS Quota Management subsystem |
112 |
Initializing Cryptographic API |
113 |
io scheduler noop registered |
114 |
io scheduler deadline registered (default) |
115 |
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) |
116 |
Linux agpgart interface v0.101 (c) Dave Jones |
117 |
vesafb: NVidia, Riva TNT, A0 (OEM: NVidia) |
118 |
vesafb: VBE version: 3.0 |
119 |
vesafb: protected mode interface info at c000:043c |
120 |
vesafb: pmi: set display start = c00c0475, set palette = c00c04eb |
121 |
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf |
122 |
3d0 3d1 3d2 3d3 3d4 3d5 3da |
123 |
vesafb: VBIOS/hardware supports DDC2 transfers |
124 |
vesafb: monitor limits: vf = 99 Hz, hf = 85 kHz, clk = 148 MHz |
125 |
vesafb: scrolling: redraw |
126 |
Console: switching to colour frame buffer device 80x30 |
127 |
vesafb: framebuffer at 0xcc000000, mapped to 0xd0880000, using 15000k, total |
128 |
16384k |
129 |
fb0: VESA VGA frame buffer device |
130 |
isapnp: Scanning for PnP cards... |
131 |
isapnp: No Plug & Play device found |
132 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
133 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
134 |
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
135 |
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
136 |
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
137 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 |
138 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
139 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
140 |
mice: PS/2 mouse device common for all mice |
141 |
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
142 |
loop: loaded (max 8 devices) |
143 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
144 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
145 |
SIS5513: IDE controller at PCI slot 0000:00:02.5 |
146 |
SIS5513: chipset revision 208 |
147 |
SIS5513: not 100% native mode: will probe irqs later |
148 |
SIS5513: SiS735 ATA 100 (2nd gen) controller |
149 |
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA |
150 |
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA |
151 |
Probing IDE interface ide0... |
152 |
input: AT Translated Set 2 keyboard as /class/input/input0 |
153 |
logips2pp: Detected unknown logitech mouse model 1 |
154 |
hda: SAMSUNG SP8004H, ATA DISK drive |
155 |
input: PS/2 Logitech Mouse as /class/input/input1 |
156 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
157 |
Probing IDE interface ide1... |
158 |
hdc: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive |
159 |
hdd: TOSHIBA CD-ROM XM-6402B, ATAPI CD/DVD-ROM drive |
160 |
ide1 at 0x170-0x177,0x376 on irq 15 |
161 |
hda: max request size: 128KiB |
162 |
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) |
163 |
hda: cache flushes supported |
164 |
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > |
165 |
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) |
166 |
Uniform CD-ROM driver Revision: 3.20 |
167 |
hdd: ATAPI 32X CD-ROM drive, 256kB Cache, UDMA(33) |
168 |
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 |
169 |
md: bitmap version 4.39 |
170 |
EISA: Probing bus 0 at eisa.0 |
171 |
EISA: Detected 0 cards. |
172 |
TCP bic registered |
173 |
NET: Registered protocol family 1 |
174 |
NET: Registered protocol family 17 |
175 |
Using IPI Shortcut mode |
176 |
md: Autodetecting RAID arrays. |
177 |
md: autorun ... |
178 |
md: ... autorun DONE. |
179 |
kjournald starting. Commit interval 5 seconds |
180 |
EXT3-fs: mounted filesystem with ordered data mode. |
181 |
VFS: Mounted root (ext3 filesystem) readonly. |
182 |
Freeing unused kernel memory: 192k freed |
183 |
EXT3 FS on hda5, internal journal |
184 |
nvidia: module license 'NVIDIA' taints kernel. |
185 |
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 |
186 |
PCI: setting IRQ 5 as level-triggered |
187 |
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> |
188 |
IRQ 5 |
189 |
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7184 Tue Aug 1 18:38:58 |
190 |
PDT 2006 |
191 |
kjournald starting. Commit interval 5 seconds |
192 |
EXT3 FS on hda6, internal journal |
193 |
EXT3-fs: mounted filesystem with ordered data mode. |
194 |
NTFS driver 2.1.27 [Flags: R/O MODULE]. |
195 |
NTFS volume version 3.0. |
196 |
kjournald starting. Commit interval 5 seconds |
197 |
EXT3 FS on hda7, internal journal |
198 |
EXT3-fs: mounted filesystem with ordered data mode. |
199 |
kjournald starting. Commit interval 5 seconds |
200 |
EXT3 FS on hda8, internal journal |
201 |
EXT3-fs: mounted filesystem with ordered data mode. |
202 |
kjournald starting. Commit interval 5 seconds |
203 |
EXT3 FS on hda9, internal journal |
204 |
EXT3-fs: mounted filesystem with ordered data mode. |
205 |
kjournald starting. Commit interval 5 seconds |
206 |
EXT3 FS on hda10, internal journal |
207 |
EXT3-fs: mounted filesystem with ordered data mode. |
208 |
kjournald starting. Commit interval 5 seconds |
209 |
EXT3 FS on hda11, internal journal |
210 |
EXT3-fs: mounted filesystem with ordered data mode. |
211 |
kjournald starting. Commit interval 5 seconds |
212 |
EXT3 FS on hda12, internal journal |
213 |
EXT3-fs: mounted filesystem with ordered data mode. |
214 |
subfs 0.9 |
215 |
usbcore: registered new driver usbfs |
216 |
usbcore: registered new driver hub |
217 |
Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k |
218 |
Real Time Clock Driver v1.12ac |
219 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
220 |
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 |
221 |
PCI: setting IRQ 11 as level-triggered |
222 |
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> |
223 |
IRQ 11 |
224 |
ohci_hcd 0000:00:02.2: OHCI Host Controller |
225 |
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 |
226 |
ohci_hcd 0000:00:02.2: irq 11, io mem 0xcfffe000 |
227 |
usb usb1: configuration #1 chosen from 1 choice |
228 |
hub 1-0:1.0: USB hub found |
229 |
hub 1-0:1.0: 3 ports detected |
230 |
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 |
231 |
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> |
232 |
IRQ 11 |
233 |
ohci_hcd 0000:00:02.3: OHCI Host Controller |
234 |
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 |
235 |
ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000 |
236 |
usb usb2: configuration #1 chosen from 1 choice |
237 |
hub 2-0:1.0: USB hub found |
238 |
hub 2-0:1.0: 3 ports detected |
239 |
usb 1-1: new full speed USB device using ohci_hcd and address 2 |
240 |
usb 1-1: configuration #1 chosen from 1 choice |
241 |
Initializing USB Mass Storage driver... |
242 |
scsi0 : SCSI emulation for USB Mass Storage devices |
243 |
usbcore: registered new driver usb-storage |
244 |
USB Mass Storage support registered. |
245 |
usb-storage: device found at 2 |
246 |
usb-storage: waiting for device to settle before scanning |
247 |
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 |
248 |
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 11 (level, low) -> |
249 |
IRQ 11 |
250 |
intel8x0_measure_ac97_clock: measured 52766 usecs |
251 |
intel8x0: clocking to 48000 |
252 |
8139too Fast Ethernet driver 0.9.27 |
253 |
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> |
254 |
IRQ 5 |
255 |
eth0: RealTek RTL8139 at 0xd183ef00, 00:40:f4:c0:b3:d2, IRQ 5 |
256 |
eth0: Identified 8139 chip type 'RTL-8100B/8139D' |
257 |
input: PC Speaker as /class/input/input2 |
258 |
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 |
259 |
Vendor: Kingston Model: DataTraveler 2.0 Rev: 4.10 |
260 |
Type: Direct-Access ANSI SCSI revision: 02 |
261 |
SCSI device sda: 251904 512-byte hdwr sectors (129 MB) |
262 |
sda: Write Protect is off |
263 |
sda: Mode Sense: 0b 00 00 08 |
264 |
sda: assuming drive cache: write through |
265 |
SCSI device sda: 251904 512-byte hdwr sectors (129 MB) |
266 |
sda: Write Protect is off |
267 |
sda: Mode Sense: 0b 00 00 08 |
268 |
sda: assuming drive cache: write through |
269 |
sda: sda1 |
270 |
sd 0:0:0:0: Attached scsi removable disk sda |
271 |
usb-storage: device scan complete |
272 |
Floppy drive(s): fd0 is 1.44M |
273 |
FDC 0 is a post-1991 82077 |
274 |
parport: PnPBIOS parport detected. |
275 |
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
276 |
ohci_hcd 0000:00:02.3: wakeup |
277 |
usb 2-1: new full speed USB device using ohci_hcd and address 2 |
278 |
usb 2-1: configuration #1 chosen from 1 choice |
279 |
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 |
280 |
proto 2 vid 0x04A9 pid 0x1051 |
281 |
usbcore: registered new driver usblp |
282 |
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver |
283 |
subfs: submountd execution failure. Error 256 |
284 |
sebastian@r1-gentoo ~ $ |
285 |
|
286 |
Gruß |
287 |
Sebastian |
288 |
|
289 |
-- |
290 |
gentoo-user-de@g.o mailing list |