1 |
saludos: |
2 |
|
3 |
Una pregunta, tengo 2 unidades de cdrom /de/hdc y /dev/hdd, mi |
4 |
problema rádica en /de/hdd cuando trato de montrar un cdrom en esta unida |
5 |
me indica |
6 |
|
7 |
#mount -t iso9660 /dev/hdd /mnt/cdrom1 |
8 |
#mount: special device /dev/hdd does not exist |
9 |
|
10 |
Por supuesto que el disco esta adentro de la unidad, buscando en el |
11 |
sistema me di cuenta que el problema es que el /dev/hdd no existe . |
12 |
|
13 |
# ls -l /dev/hd* |
14 |
lr-xr-xr-x 1 root root 32 Mar 29 06:06 /dev/hda -> |
15 |
ide/host0/bus0/target0/lun0/disc |
16 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda1 -> |
17 |
ide/host0/bus0/target0/lun0/part1 |
18 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda2 -> |
19 |
ide/host0/bus0/target0/lun0/part2 |
20 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda5 -> |
21 |
ide/host0/bus0/target0/lun0/part5 |
22 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda6 -> |
23 |
ide/host0/bus0/target0/lun0/part6 |
24 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda7 -> |
25 |
ide/host0/bus0/target0/lun0/part7 |
26 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda8 -> |
27 |
ide/host0/bus0/target0/lun0/part8 |
28 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hda9 -> |
29 |
ide/host0/bus0/target0/lun0/part9 |
30 |
lr-xr-xr-x 1 root root 32 Mar 29 06:06 /dev/hdb -> |
31 |
ide/host0/bus0/target1/lun0/disc |
32 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hdb1 -> |
33 |
ide/host0/bus0/target1/lun0/part1 |
34 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hdb2 -> |
35 |
ide/host0/bus0/target1/lun0/part2 |
36 |
lr-xr-xr-x 1 root root 33 Mar 29 06:06 /dev/hdb3 -> |
37 |
ide/host0/bus0/target1/lun0/part3 |
38 |
lr-xr-xr-x 1 root root 30 Mar 29 06:06 /dev/hdc -> |
39 |
ide/host0/bus1/target0/lun0/cd |
40 |
|
41 |
Solo muesta /dev hasta hdc, pero cuando arranca el kernel si lo |
42 |
detecta. |
43 |
|
44 |
Mar 29 06:06:38 section kernel: hda: SAMSUNG SV4002H, ATA DISK drive |
45 |
Mar 29 06:06:38 section kernel: hdb: SAMSUNG SV0432A, ATA DISK drive |
46 |
Mar 29 06:06:38 section kernel: blk: queue c0183680, I/O limit 4095Mb (mask |
47 |
0xffffffff) |
48 |
Mar 29 06:06:38 section kernel: blk: queue c01837bc, I/O limit 4095Mb (mask |
49 |
0xffffffff) |
50 |
Mar 29 06:06:38 section kernel: hdc: ATAPI CD-ROM DRIVE 36X MAXIMUM, ATAPI |
51 |
CD/DVD-ROM drive |
52 |
Mar 29 06:06:38 section kernel: hdd: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM |
53 |
drive |
54 |
Mar 29 06:06:38 section kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
55 |
Mar 29 06:06:38 section kernel: ide1 at 0x170-0x177,0x376 on irq 15 |
56 |
Mar 29 06:06:38 section kernel: hda: attached ide-disk driver. |
57 |
Mar 29 06:06:38 section kernel: hda: 78242976 sectors (40060 MB) w/1945KiB |
58 |
Cache, CHS=4870/255/63, |
59 |
UDMA(100) |
60 |
Mar 29 06:06:38 section kernel: hdb: attached ide-disk driver. |
61 |
Mar 29 06:06:38 section kernel: hdb: 8421840 sectors (4311 MB) w/482KiB |
62 |
Cache, CHS=524/255/63, UDMA |
63 |
(33) |
64 |
Mar 29 06:06:38 section kernel: hdc: attached ide-cdrom driver. |
65 |
Mar 29 06:06:38 section kernel: hdc: ATAPI 32X CD-ROM drive, 128kB Cache |
66 |
Mar 29 06:06:38 section kernel: Uniform CD-ROM driver Revision: 3.12 |
67 |
Mar 29 06:06:38 section kernel: Partition check: |
68 |
Mar 29 06:06:38 section kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < |
69 |
p5 p6 p7 p8 p9 > |
70 |
Mar 29 06:06:38 section kernel: /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 |
71 |
|
72 |
|
73 |
Entonces yo creo que la falla rádica en que el sistema por alguna |
74 |
razón no creo el /dev/hdd o en su defecto el |
75 |
ide/host0/bus1/target0/lun0/cd1 por ejemplo. |
76 |
|
77 |
A algunos de ustedes le paso este problema?. |
78 |
|
79 |
Nota la unidad esta buena ya que la uso en debian sin ningún |
80 |
problema. |
81 |
|
82 |
Cualquier sujerencia se las agradecería. |
83 |
|
84 |
atte: |
85 |
José Zamora |
86 |
|
87 |
|
88 |
-- |
89 |
gentoo-user-es@g.o mailing list |