1 |
Hola amigos de la lista |
2 |
|
3 |
le escribo ya que nesecito su ayuda nuevamente. |
4 |
|
5 |
tengo ploblemas al quemar un imagen bin/cue de svcd creada con vcdxbuild, |
6 |
|
7 |
he probado con crrdao y cdrecord y ambos fallan en lo mismo me parece. |
8 |
|
9 |
aca esta la orden y la salida |
10 |
|
11 |
con cdrdao: |
12 |
************************************************************* |
13 |
|
14 |
~ $ cdrdao write --device /dev/cdrw "videocd.cue" |
15 |
|
16 |
Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas@×××××.de> |
17 |
SCSI interface library - (C) Joerg Schilling |
18 |
Paranoia DAE library - (C) Monty |
19 |
|
20 |
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. |
21 |
|
22 |
Using libscg version 'schily-0.8' |
23 |
|
24 |
/dev/cdrw: HL-DT-ST RW/DVD GCC-4243N Rev: 1.07 |
25 |
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) |
26 |
|
27 |
Starting write at speed 24... |
28 |
Pausing 10 seconds - hit CTRL-C to abort. |
29 |
Process can be aborted with QUIT signal (usually CTRL-\). |
30 |
Turning BURN-Proof on |
31 |
Executing power calibration... |
32 |
Power calibration successful. |
33 |
?: Success. : scsi sendcmd: no error |
34 |
CDB: 2A 00 FF FF FF 6A 00 00 1A 00 |
35 |
status: 0x2 (CHECK CONDITION) |
36 |
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 |
37 |
Sense Key: 0x5 Illegal Request, Segment 0 |
38 |
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 |
39 |
Sense flags: Blk 0 (not valid) |
40 |
resid: 60736 |
41 |
cmd finished after 0.001s timeout 180s |
42 |
ERROR: Write data failed. |
43 |
ERROR: Writing failed. |
44 |
|
45 |
************************************************************* |
46 |
|
47 |
con cdrecord: |
48 |
************************************************************* |
49 |
|
50 |
~ $ cdrecord -v gracetime=2 dev=/dev/cdrw speed=24 -dao |
51 |
driveropts=burnfree cuefile=videocd.cue -eject |
52 |
|
53 |
Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C) |
54 |
1995-2006 Jörg Schilling |
55 |
TOC Type: 1 = CD-ROM |
56 |
scsidev: '/dev/cdrw' |
57 |
devname: '/dev/cdrw' |
58 |
scsibus: -2 target: -2 lun: -2 |
59 |
Warning: Open by 'devname' is unintentional and not supported. |
60 |
Linux sg driver version: 3.5.27 |
61 |
Using libscg version 'schily-0.8'. |
62 |
Driveropts: 'burnfree' |
63 |
SCSI buffer size: 64512 |
64 |
atapi: 1 |
65 |
Device type : Removable CD-ROM |
66 |
Version : 0 |
67 |
Response Format: 2 |
68 |
Capabilities : |
69 |
Vendor_info : 'HL-DT-ST' |
70 |
Identifikation : 'RW/DVD GCC-4243N' |
71 |
Revision : '1.07' |
72 |
Device seems to be: Generic mmc2 DVD-ROM. |
73 |
Current: CD-R |
74 |
Profile: DVD-ROM |
75 |
Profile: CD-ROM |
76 |
Profile: CD-R (current) |
77 |
Profile: CD-RW |
78 |
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). |
79 |
Driver flags : MMC-3 SWABAUDIO BURNFREE |
80 |
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R |
81 |
Drive buf size : 1601712 = 1564 KB |
82 |
FIFO size : 4194304 = 4096 KB |
83 |
Track 01: data 1 MB |
84 |
Track 02: data 644 MB |
85 |
Total size: 645 MB (63:59.62) = 287972 sectors |
86 |
Lout start: 646 MB (64:01/47) = 287972 sectors |
87 |
Current Secsize: 2048 |
88 |
ATIP info from disk: |
89 |
Indicated writing power: 5 |
90 |
Is not unrestricted |
91 |
Is not erasable |
92 |
Disk sub type: Medium Type A, low Beta category (A-) (2) |
93 |
ATIP start of lead in: -11535 (97:28/15) |
94 |
ATIP start of lead out: 359847 (79:59/72) |
95 |
Disk type: Short strategy type (Phthalocyanine or similar) |
96 |
Manuf. index: 7 |
97 |
Manufacturer: GIGASTORAGE CORPORATION |
98 |
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 71875 |
99 |
Starting to write CD/DVD at speed 24 in real SAO mode for single session. |
100 |
Last chance to quit, starting real write 0 seconds. Operation starts. |
101 |
Waiting for reader process to fill input buffer ... input buffer ready. |
102 |
BURN-Free is ON. |
103 |
Performing OPC... |
104 |
Sending CUE sheet... |
105 |
Writing pregap for track 1 at -150 |
106 |
cdrecord: Success. write_g1: scsi sendcmd: no error |
107 |
CDB: 2A 00 FF FF FF 6A 00 00 1B 00 |
108 |
status: 0x2 (CHECK CONDITION) |
109 |
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 |
110 |
Sense Key: 0x5 Illegal Request, Segment 0 |
111 |
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 |
112 |
Sense flags: Blk 0 (not valid) |
113 |
resid: 63504 |
114 |
cmd finished after 0.001s timeout 200s |
115 |
write track pad data: error after 0 bytes |
116 |
BFree: 1564 K BSize: 1564 K |
117 |
Starting new track at sector: 0 |
118 |
Track 01: 0 of 1 MB written.cdrecord: Success. write_g1: scsi |
119 |
sendcmd: no error |
120 |
CDB: 2A 00 00 00 00 00 00 00 1B 00 |
121 |
status: 0x2 (CHECK CONDITION) |
122 |
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 |
123 |
Sense Key: 0x5 Illegal Request, Segment 0 |
124 |
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 |
125 |
Sense flags: Blk 0 (not valid) |
126 |
resid: 63504 |
127 |
cmd finished after 0.001s timeout 200s |
128 |
|
129 |
write track data: error after 0 bytes |
130 |
cdrecord: A write error occured. |
131 |
cdrecord: Please properly read the error message above. |
132 |
Writing time: 10.168s |
133 |
Average write speed 766.4x. |
134 |
Fixating... |
135 |
Fixating time: 0.002s |
136 |
cdrecord: fifo had 64 puts and 1 gets. |
137 |
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. |
138 |
|
139 |
|
140 |
************************************************************* |
141 |
|
142 |
|
143 |
|
144 |
bueno eso es, no se como solucionarlo. |
145 |
|
146 |
nunca habia intentado quemar una imagen bin/cue, solo iso y con estas |
147 |
nunca tuve problemas |
148 |
|
149 |
|
150 |
de antemano les agradesco su ayuda |
151 |
|
152 |
|
153 |
adios. |
154 |
-- |
155 |
C.M.C. |
156 |
-- |
157 |
gentoo-user-es@g.o mailing list |