Re: [gentoo-user-fr] connection reseau local

[Bertrand Van den Plas]

une vérification des log sur eth me donne:

May 15 17:48:13 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 15 17:52:14 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 15 17:52:17 porbert uli526x: eth0 NIC Link is Down
May 15 17:52:26 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 17:52:54 porbert uli526x: eth0 NIC Link is Down
May 15 17:55:37 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 19:49:11 porbert uli526x: eth0 NIC Link is Down
May 15 19:57:12 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 19:57:24 porbert uli526x: eth0 NIC Link is Down
May 15 19:57:27 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 20:03:32 porbert uli526x: eth0 NIC Link is Down
May 15 21:09:28 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 21:16:13 porbert uli526x: eth0 NIC Link is Down
May 15 21:16:16 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 21:19:04 porbert uli526x: eth0 NIC Link is Down
May 15 21:20:47 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 22:28:52 porbert uli526x: eth0 NIC Link is Down
May 15 22:29:14 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 23:10:52 porbert uli526x: eth0 NIC Link is Down
May 15 23:14:30 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 15 23:17:31 porbert uli526x: eth0 NIC Link is Down
May 16 06:32:24 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 16 06:33:01 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 16 06:33:04 porbert uli526x: eth0 NIC Link is Down
May 16 06:34:10 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 16 06:35:19 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 16 06:35:44 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 16 06:35:47 porbert uli526x: eth0 NIC Link is Down
May 16 06:36:27 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 16 06:36:42 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 16 06:37:44 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp

[...] reboot sur un kernel vanilla tout juste compilé

May 17 16:50:55 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 17 16:51:16 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 17 16:51:20 porbert uli526x: eth0 NIC Link is Up 10 Mbps Half duplex
May 17 17:47:58 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 17 18:11:50 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 17 18:11:53 porbert uli526x: eth0 NIC Link is Down
May 17 18:17:05 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 17 18:19:31 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp
May 17 18:19:34 porbert uli526x: eth0 NIC Link is Down
May 17 18:28:37 porbert eth0: ULi M5263 at pci0000:00:1b.0,
00:40:d0:8e:78:81, irq 22.
May 17 18:34:27 porbert rc-scripts: Configuration not set for eth0 -
assuming dhcp

[...]

On Wed, 2006-05-17 at 22:10 +0200, Boris Fersing wrote:
> 2006/5/17, Bertrand Van den Plas <jonibo@×××××.com>:
> > Ce qu'il y a, c'est que quand je définis une adresse fixe, il me
> > l'indique avec ifconfig mais ne me permet pas d'accéder au réseau. Dans
> > ce cas ci, j'ai laissé le fichier /etc/conf.d/net vide pour lancer dhcp
> > mais il ne veut pas me connecter:
> >
> > /etc/init.d/net.eth0 restart
> > Starting eth0
> >   Loading networking modules for eth0
> >     modules: iptunnel ifconfig dhcpcd apipa
> >       ifconfig provides interface
> >       dhcpcd provides dhcp
> >   Bringing up eth0
> >     Configuration not set for eth0 - assuming dhcp
> >     dhcp
> >       Running dhcpcd ...                [!!]
> >
>
> "uli526x: eth0 NIC Link is Down" <-- le cable est bien branché et il
> fonctionne ?
>
> Boris.
> > On Wed, 2006-05-17 at 20:58 +0200, Jean Magnan de Bornier wrote:
> > > Le 17 mai à 18:38:36 Bertrand Van den Plas <jonibo@×××××.com> écrit notamment:
> > >
> > > | Voilà voilà,
> > > | 1) net.eth0 au boot ou lancé à la main par la suite ne change rien.
> > > >
> > > | 2) le module de la carte est chargé:
> > > >
> > > | dmesg | grep eth
> > > >
> > > | eth0: ULi M5263 at pci0000:00:1b.0, 00:40:d0:8e:78:81, irq 22.
> > > | uli526x: eth0 NIC Link is Down
> > > >
> > >
> > > ces derniers mots te disent que eth0 n'est pas connecté...
> > >
> > > >
> > > | 3) ifconfig -a:
> > > | eth0      Link encap:Ethernet  HWaddr 00:40:D0:8E:78:81
> > > |           BROADCAST MULTICAST  MTU:1500  Metric:1
> > > |           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > |           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> > > |           collisions:0 txqueuelen:1000
> > > |           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> > > |           Interrupt:22 Base address:0x2000
> > >
> > > et ceci que n'as pas d'adresse ip affectée à ta carte eth0
> > >
> > >
> > > Donc ta config réseau est à revoir; soit tu fonctionnes en dhcp et c'est
> > > "dhcpcd" en root qu'il faut taper; soit tu dois indiquer une ip et c'est
> > > dans /etc/conf.d/net que tu l'écris.
> > >
> > >
> > > --
> > > Jean
> > >
> >
> > --
> > gentoo-user-fr@g.o mailing list
> >
> >
>
>
> --
> Quiconque me parle de Dieu en veut à ma bourse ou à ma liberté.
>

-- 
gentoo-user-fr@g.o mailing list