Re: [gentoo-user-hu] /usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode. [SOLVED]

[Tóth Péter Barnabás]

Helló!

néha a legegyszerûbb dolgot felejti el megnézni az ember: hibás volt a 
cd amit másoltam volna...
sorry...

barnabás


Tóth Péter Barnabás wrote:

> Helló!
>
> Van valakinek ötlete mért állhat le a cd írás ilyen hibaüzenettel?
> Csak ha cd-rõl egész cd-t akarok másolni akkor jön, ha merevlemezrõl
> akkor nem.
> Most próbáltam elõször mióta 3.2.2-es KDE-re upgradeltem, bár amint
> látszik a 0.11.6-ra lefokozott k3b-nél is ott a hiba, pedig régen nem
> volt. A setupon semmit sem változtattam és régen nem volt vele gond.
>
> Ami még gond lehet a cdrdao, amit szintén újra tettem mert 1.1.8-a2
> volt CVS-bõl rég , most meg az 1.1.8 ebuildbõl, miután elõjött a hiba,
> de ez sem segített...
>
> betettem a cdrecord felhasználói beállítások közé -raw96r opciót ahogy
> tanácsolta és így a cd-rõl cd-re másolást klónozással meg tudom
> csinálni, de az elég lassú...
>
> Van ötletetek, hogy tudnám visszaállítani a rendes, közvetlen cd-rõl
> cd-re másolást, mert a -raw96r opcióval meg a normál írás nem akar
> menni...
>
> Kösz!
> barnabás
>
>
> ----------------------------------------------------------
> System
> -----------------------
> K3b Version: 0.11.6
> KDE Version: 3.2.2
> QT Version:  3.3.0
>
> cdrecord
> -----------------------
> scsidev: '/dev/ide/host0/bus0/target1/lun0/cd'
> devname: '/dev/ide/host0/bus0/target1/lun0/cd'
> scsibus: -2 target: -2 lun: -2
> Warning: Open by 'devname' is unintentional and not supported.
> Linux sg driver version: 3.5.27
> SCSI buffer size: 64512
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> Cdrecord-Clone 2.01a25 (i686-pc-linux-gnu) Copyright (C) 1995-2004
> Jörg Schilling
> TOC Type: 3 = CD-ROM XA mode 2
> Waiting for data on stdin...
> Using libscg version 'schily-0.8'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'ATAPI   '
> Identifikation : 'CD-RW 40X12     '
> Revision       : 'V.PW'
> Device seems to be: Generic mmc CD-RW.
> Current: 0x0009
> Profile: 0x000A
> Profile: 0x0009 (current)
> Profile: 0x0008
> Profile: 0x0002 (current)
> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> Drive buf size : 1981056 = 1934 KB
> FIFO size      : 4194304 = 4096 KB
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> /usr/bin/cdrecord: Warning: controller returns wrong size for CD
> capabilities page.
> Track 01: data   570 MB        Total size:      652 MB (64:39.77) =
> 290983 sectors
> Lout start:      653 MB (64:41/58) = 290983 sectors
> Current Secsize: 2048
> ATIP info from disk:
>  Indicated writing power: 5
>  Is not unrestricted
>  Is not erasable
>  Disk sub type: Medium Type B, low Beta category (B-) (4)
>  ATIP start of lead in:  -11834 (97:24/16)
>  ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Short strategy type (Phthalocyanine or similar)
> Manuf. index: 24
> Manufacturer: SONY Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 68866
> Forcespeed is OFF.
> Starting to write CD/DVD at speed 16 in real SAO mode for single session.
> Last chance to quit, starting real write in 2 seconds.
>   1 seconds.
>   0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Performing OPC...
> Sending CUE sheet...
> /usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum
> pregapsize = 1.
> /usr/bin/cdrecord: Success. send_cue_sheet: scsi sendcmd: no error
> CDB:  5D 00 00 00 00 00 00 00 20 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 32
> cmd finished after 0.000s timeout 200s
> /usr/bin/cdrecord: CUE sheet still not accepted. Please try to write
> in RAW (-raw96r) mode.
> /usr/bin/cdrecord: Cannot send CUE sheet.
> /usr/bin/cdrecord: Could not write Lead-in.
> Writing  time:   13.258s
> /usr/bin/cdrecord: fifo had 64 puts and 0 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill
> was 100%.
> BURN-Free was never needed.
>
> cdrecord comand:
> -----------------------
> /usr/bin/cdrecord -v gracetime=2
> dev=/dev/ide/host0/bus0/target1/lun0/cd -dao driveropts=burnfree
> -eject -overburn -waiti -xa1 -tsize=598261048 -
>
>
> --
> gentoo-user-hu@g.o mailing list
>
>
>


--
gentoo-user-hu@g.o mailing list