Re: [gentoo-user-hu] Re: CD eject probléma

[Bukuli Norbert]

Nincs bekapcsolva.

Bukuli Norbert <bukuli.norbert@×××××.com> írta (2010. június 25. 10:02):
> Szia!
>
> Elvileg nincs.
> Este leszek gép előtt, akkor tudom megmondani pontosan.
>
> Testa <testa.a.tapos@×××××.com> írta (2010. június 24. 23:54):
>> Bocs hogy közbe röfögök nem olvastam végig mindent elég figyelmesen.
>> De nincs véletlen bekapcsolva a scsi emuláció????
>>
>> On 23 June 2010 23:30, Bukuli Norbert <bukuli.norbert@×××××.com> wrote:
>>> A config magától generálódik, minden induláskor.
>>>
>>> $ sudo grep 0000:03:00.0 /var/log/dmesg
>>> pci 0000:03:00.0: reg 24 32bit mmio: [0xf8000000-0xf8001fff]
>>> pci 0000:03:00.0: PME# supported from D3hot
>>> pci 0000:03:00.0: PME# disabled
>>> ahci 0000:03:00.0: version 3.0
>>> ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>>> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>>> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
>>> ahci 0000:03:00.0: setting latency timer to 64
>>>
>>>
>>> $ sudo grep 0000:03:00.1 /var/log/dmesg
>>> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
>>> pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
>>> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
>>> pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
>>> pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
>>> jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
>>> pci 0000:03:00.1: enabling device (0000 -> 0001)
>>> pci 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>>> jmicron 0000:03:00.1: 100% native mode on irq 17
>>> pci 0000:03:00.1: setting latency timer to 64
>>>
>>> Sajnos nem vagyok tisztában vele, hogy a PCI buszon milyen szabályok
>>> szerint történik az eszközök számozása, de ha a .1 végűt összevetem a
>>> korábban írtakkal, akkor lehet némi tartománybeli egyezést
>>> megfigyelni:
>>>
>>> ide0 at 0xc000-0xc007,0xc102 on irq 17
>>> pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
>>>
>>> ill.:
>>>
>>> ide1 at 0xc200-0xc207,0xc302 on irq 17
>>> pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
>>>
>>>
>>> Persze lehet, hogy ez két teljesen külön álló buszon szereplő
>>> címtartomány és csak véletlen egybeesésről van szó.
>>>
>>> 2010/6/23 cjvt <cjvt@××××××××.hu>:
>>>> Nem biztos de ez alapjan a NEC-nek a rule-ban nem a
>>>> pci-0000:03:00.0 -on kene lennie?
>>>>
>>>>
>>>> 2010. június 23. 22:44:52 dátummal Bukuli Norbert az alábbiakat írta:
>>>>> Úgy értettem, hogy egy eject folyamán nem keletkezik semmilyen
>>>>> bejegyzés a dmesgben.
>>>>>
>>>>> A vonatkozó sorok:
>>>>> Probing IDE interface ide0...
>>>>> hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>>>>> hdb: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
>>>>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>>>>> hda: UDMA/33 mode selected
>>>>> hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>>>>> hdb: UDMA/66 mode selected
>>>>> Probing IDE interface ide1...
>>>>> ide0 at 0xc000-0xc007,0xc102 on irq 17
>>>>> ide1 at 0xc200-0xc207,0xc302 on irq 17
>>>>> ide_generic: please use "probe_mask=0x3f" module parameter for probing
>>>>> all legacy ISA IDE ports
>>>>> ide-gd driver 1.18
>>>>> ide-cd driver 5.00
>>>>> ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>> ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
>>>>>
>>>>> ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>> ata4.01: HPA detected: current 234439535, native 234441648
>>>>> ata4.01: ATA-7: SAMSUNG HD120IJ, WZ100-33, max UDMA7
>>>>> ata4.01: 234439535 sectors, multi 16: LBA48 NCQ (depth 0/32)
>>>>> ata4.01: configured for UDMA/133
>>>>>
>>>>> ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>>>>> ata3.01: HPA detected: current 976771055, native 976773168
>>>>> ata3.01: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133
>>>>> ata3.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
>>>>> ata3.01: configured for UDMA/133
>>>>>
>>>>>
>>>>> # lshw -C disk
>>>>>   *-cdrom:0
>>>>>        description: DVD writer
>>>>>        product: _NEC DVD_RW ND-3500AG
>>>>>        physical id: 0
>>>>>        bus info: ide@0.0
>>>>>        logical name: /dev/hda
>>>>>        version: 2.1B
>>>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba
>>>>> iordy audio cd-r cd-rw dvd dvd-r
>>>>>        configuration: mode=udma2 status=nodisc
>>>>>   *-cdrom:1
>>>>>        description: DVD writer
>>>>>        product: PIONEER DVD-RW DVR-111D
>>>>>        vendor: Pioneer
>>>>>        physical id: 1
>>>>>        bus info: ide@0.1
>>>>>        logical name: /dev/hdb
>>>>>        version: 1.19
>>>>>        capabilities: packet atapi cdrom removable nonmagnetic dma lba
>>>>> iordy pm audio cd-r cd-rw dvd dvd-r
>>>>>        configuration: mode=udma4 status=nodisc
>>>>>   *-disk:0
>>>>>        description: ATA Disk
>>>>>        product: WDC WD5000AAKS-2
>>>>>        vendor: Western Digital
>>>>>        physical id: 0
>>>>>        bus info: scsi@2:0.1.0
>>>>>        logical name: /dev/sda
>>>>>        version: 01.0
>>>>>        serial: WD-WMASY3020281
>>>>>        size: 465GiB (500GB)
>>>>>        capabilities: partitioned partitioned:dos
>>>>>        configuration: ansiversion=5 signature=24eeb6a2
>>>>>   *-disk:1
>>>>>        description: ATA Disk
>>>>>        product: SAMSUNG HD120IJ
>>>>>        physical id: 1
>>>>>        bus info: scsi@3:0.1.0
>>>>>        logical name: /dev/sdb
>>>>>        version: WZ10
>>>>>        serial: S0AEJ1LYB06095
>>>>>        size: 111GiB (120GB)
>>>>>        capabilities: partitioned partitioned:dos
>>>>>        configuration: ansiversion=5 signature=a8a8a8a8
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Üdvözlettel:
>>> Bukuli Norbert
>>>
>>>
>>
>>
>>
>> --
>> www.airndsoft.com
>> Artificial Intelligence Research aNd Development Software Company
>>
>>
>
>
>
> --
> Üdvözlettel:
> Bukuli Norbert
>



-- 
Üdvözlettel:
Bukuli Norbert