Re: [gentoo-user-pl] problemy z siecia(sorrki,dlugie-logi)

[abu sami]

U¿ytkownik Artur Hefczyc napisa³:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
>
> dmesg > jakispliktextowy.txt
> lub
> dmesg | less
>
>

>
> Sprawdz jakie masz moduly zaladowe po uruchomieniu z plyty instalacyjnej.
> Mozesz rowniez zobaczyc jak wygladaja sktypty instalacyjne na plycie
> instalacyjnej i porownac.
>
> Niestety ja juz tez nie mam wiecej pomyslow.
> Ale skoro dziala siec po uruchomieniu z plyty instalcyjnej to musi sie dac.
>
> Sprobuj tez zaladowac modul config (jesli jest skompilowany)
> modprobe config
> i wtedy mozesz podeslac konfiguracje ktora mozna odczytac z pliku:
> /proc/config
> Moze to komus podsunie pomysl co jest zle.
>
> Artur
> - --
> Artur Hefczyc                                artur.hefczyc@×××××××.pl
> Open Source Developer
> http://www.geotools.org/
> http://wttools.sourceforge.net/
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.2 (GNU/Linux)
>
> iD8DBQE+6x3Z0/6x1bjSKPkRAsxrAKCOSQvAQcS6/MmBu6jFrd+wN+9X4wCgqLIW
> /j105LYU33KQpKxDCfaE7WY=
> =U+EY
> -----END PGP SIGNATURE-----
>
>
> --
> gentoo-user-pl@g.o mailing list
>
>
witam.niestety dalej leze z siecia i powoli zaczynam sie zniechcecac :-(
co mam sprawdzic po zainstalowaniu z plyty?
porownalem pliki w /etc i zauwazylem ze po wrzuceniu z plyty mam taki
plik yp.config z zawartoscia:
domain flatrate.dk broadcast

a normalnie go w nie mam.

to moj lastlog z plyty:

Linux version 2.4.20-xfs-r2 (root@ToyRoom) (gcc version 3.2.1 20021207
(Gentoo Linux 3.2.1-20021207)) #1 Thu Apr 10 02:24:31 Local time zone
must be set--see zic manu
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: vga=791 initrd=initrd.1024 acpi=off root=/dev/ram0
init=/linuxrc nomce BOOT_IMAGE=gentoo vga=794
Initializing CPU#0
Detected 1667.388 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3329.22 BogoMIPS
Memory: 510316k/524224k available (1927k kernel code, 13520k reserved,
568k data, 104k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by ptb@×××××××.es
proc config counted 6134 bytes in names
proc config counted 668 bytes in value handles
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@××××××××××.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021212
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfb740, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@××××××××××.au)
devfs: boot_options: 0x0
SGI XFS snapshot 2.4.20-2003-01-14_00:43_UTC with ACLs, DMAPI, realtime,
quota, no debug enabled
vesafb: framebuffer at 0xe0000000, mapped to 0xe080d000, size 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:b850
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... no good signature found.
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try
using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
VP_IDE: default first interface base=0x01f0, second interface base=0x170
     ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
HPT374: IDE controller on PCI bus 00 dev 98
PCI: Found IRQ 10 for device 00:13.0
PCI: Sharing IRQ 10 with 00:10.2
PCI: Sharing IRQ 10 with 00:0e.2
PCI: Sharing IRQ 10 with 00:11.5
PCI: Sharing IRQ 10 with 00:13.1
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
HPT374: first interface base=0xc000, second interface base=0xc800
     ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio
     ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
HPT374: IDE controller on PCI bus 00 dev 99
PCI: Found IRQ 10 for device 00:13.1
PCI: Sharing IRQ 10 with 00:10.2
PCI: Sharing IRQ 10 with 00:0e.2
PCI: Sharing IRQ 10 with 00:11.5
PCI: Sharing IRQ 10 with 00:13.0
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
HPT374: first interface base=0xd400, second interface base=0xdc00
     ide4: BM-DMA at 0xe400-0xe407, BIOS settings: hdi:pio, hdj:pio
     ide5: BM-DMA at 0xe408-0xe40f, BIOS settings: hdk:pio, hdl:pio
hda: Maxtor 6Y060L0, ATA DISK drive
hdc: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03b3424, I/O limit 4095Mb (mask 0xffffffff)
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63,
UDMA(133)
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33)
Partition check:
  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon
Janes (simon@×××.com)
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 5000 blocks [1 disk] into ram disk...
(...)-\|done.
Freeing initrd memory: 5012k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 104k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:0e.2
PCI: Sharing IRQ 10 with 00:10.2
PCI: Sharing IRQ 10 with 00:11.5
PCI: Sharing IRQ 10 with 00:13.0
PCI: Sharing IRQ 10 with 00:13.1
hcd.c: ehci-hcd @ 00:0e.2, VIA Technologies, Inc. USB 2.0
hcd.c: irq 10, pci mem e4826000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95
hub.c: USB hub found
hub.c: 4 ports detected
PCI: Found IRQ 7 for device 00:10.3
PCI: Sharing IRQ 7 with 00:0e.0
hcd.c: ehci-hcd @ 00:10.3, VIA Technologies, Inc. USB 2.0 (#2)
hcd.c: irq 7, pci mem e4828000
usb.c: new USB bus registered, assigned bus number 2
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 7 for device 00:0e.0
PCI: Sharing IRQ 7 with 00:10.3
uhci.c: USB UHCI at I/O 0xa000, IRQ 7
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:0e.1
PCI: Sharing IRQ 3 with 00:10.1
uhci.c: USB UHCI at I/O 0xa400, IRQ 3
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:0b.0
PCI: Sharing IRQ 11 with 00:0b.1
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:12.0
uhci.c: USB UHCI at I/O 0xa800, IRQ 11
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
PCI: Sharing IRQ 3 with 00:0e.1
uhci.c: USB UHCI at I/O 0xac00, IRQ 3
usb.c: new USB bus registered, assigned bus number 6
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:10.2
PCI: Sharing IRQ 10 with 00:0e.2
PCI: Sharing IRQ 10 with 00:11.5
PCI: Sharing IRQ 10 with 00:13.0
PCI: Sharing IRQ 10 with 00:13.1
uhci.c: USB UHCI at I/O 0xb000, IRQ 10
usb.c: new USB bus registered, assigned bus number 7
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@××××.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /newroot/mnt/cdrom/livecd.cloop: 2032 blocks, 65536 bytes/block,
largest block is 60876 bytes.
cloop: loaded (max 1 devices)
hub.c: new USB device 00:10.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x1604) is not claimed by any
active driver.
evms: EVMS v1.2.1 initializing .... info level(5).
evms: md raid5: measuring checksumming speed
evms: md raid5:    8regs     :  2547.600 MB/sec
evms: md raid5:    32regs    :  1650.800 MB/sec
evms: md raid5:    pIII_sse  :  1370.800 MB/sec
evms: md raid5:    pII_mmx   :  3899.200 MB/sec
evms: md raid5:    p5_mmx    :  4977.600 MB/sec
evms: md raid5: using function: pIII_sse (1370.800 MB/sec)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
inserting floppy driver for 2.4.20-xfs-r2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
via-rhine.c:v1.10-LK1.1.14  May-3-2002  Written by Donald Becker
   http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 11 for device 00:12.0
PCI: Sharing IRQ 11 with 00:0b.0
PCI: Sharing IRQ 11 with 00:0b.1
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:10.0
eth0: VIA VT6102 Rhine-II at 0xbc00, 00:50:8d:fd:7c:fe, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
ohci1394: $Rev: 578 $ Ben Collins <bcollins@××××××.org>
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:0b.0
PCI: Sharing IRQ 11 with 00:0b.1
PCI: Sharing IRQ 11 with 00:10.0
PCI: Sharing IRQ 11 with 00:12.0
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[e8024000-e80247ff]  Max
Packet=[2048]
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.
ieee1394: Host added: Node[00:1023]  GUID[00508d0000fe7cfe]  [Linux
OHCI-1394]
usb-uhci.c: $Revision: 1.275 $ time 02:28:02 Apr 10 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
eth0: no IPv6 routers present
XFS mounting filesystem ide0(3,5)
Ending clean XFS mount for filesystem: ide0(3,5)

a to moj z systemu:

Linux version 2.4.20-xfs-r3 (root@localhost) (gcc version 3.2.2) #2 Sat 
Jun 14 12:07:57 CEST 2003
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5680
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
     Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Gentoo ro root=305
Initializing CPU#0
Detected 1667.388 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3329.22 BogoMIPS
Memory: 515092k/524224k available (2080k kernel code, 8744k reserved, 
-2404k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
  IO-APIC (apicid-pin) 2-0, 2-3, 2-7, 2-10, 2-20, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 29.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
  WARNING: unexpected IO-APIC, please mail
           to linux-smp@×××××××××××.org
.... IRQ redirection table:
  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
  00 000 00  1    0    0   0   0    0    0    00
  01 001 01  0    0    0   0   0    1    1    39
  02 001 01  0    0    0   0   0    1    1    31
  03 000 00  1    0    0   0   0    0    0    00
  04 001 01  0    0    0   0   0    1    1    41
  05 001 01  0    0    0   0   0    1    1    49
  06 001 01  0    0    0   0   0    1    1    51
  07 000 00  1    0    0   0   0    0    0    00
  08 001 01  0    0    0   0   0    1    1    59
  09 001 01  0    0    0   0   0    1    1    61
  0a 000 00  1    0    0   0   0    0    0    00
  0b 001 01  1    1    0   1   0    1    1    69
  0c 001 01  0    0    0   0   0    1    1    71
  0d 001 01  0    0    0   0   0    1    1    79
  0e 001 01  0    0    0   0   0    1    1    81
  0f 001 01  0    0    0   0   0    1    1    89
  10 001 01  1    1    0   1   0    1    1    91
  11 001 01  1    1    0   1   0    1    1    99
  12 001 01  1    1    0   1   0    1    1    A1
  13 001 01  1    1    0   1   0    1    1    A9
  14 000 00  1    0    0   0   0    0    0    00
  15 001 01  1    1    0   1   0    1    1    B1
  16 001 01  1    1    0   1   0    1    1    B9
  17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1667.4214 MHz.
..... host bus clock speed is 266.7875 MHz.
cpu: 0, clocks: 2667875, slice: 1333937
CPU0<T0:2667872,T1:1333920,D:15,S:1333937,C:2667875>
PCI: PCI BIOS revision 2.10 entry at 0xfb740, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
PCI->APIC IRQ transform: (B0,I11,P0) -> 16
PCI->APIC IRQ transform: (B0,I11,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 16
PCI->APIC IRQ transform: (B0,I14,P0) -> 19
PCI->APIC IRQ transform: (B0,I14,P1) -> 17
PCI->APIC IRQ transform: (B0,I14,P2) -> 18
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 11
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I18,P0) -> 16
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:0e.0, from 7 to 3
PCI: Via IRQ fixup for 00:0e.1, from 3 to 1
PCI: Via IRQ fixup for 00:10.0, from 11 to 5
PCI: Via IRQ fixup for 00:10.1, from 3 to 5
PCI: Via IRQ fixup for 00:10.2, from 10 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@××××××××××.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@×××××××××.de).
SGI XFS snapshot-xfs-2.4.20-2003-04-07_05:19_UTC with ACLs, no debug enabled
SGI XFS Quota Management subsystem
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
VP_IDE: default first interface base=0x01f0, second interface base=0x170
     ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
HPT374: IDE controller on PCI bus 00 dev 98
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
HPT374: first interface base=0xc000, second interface base=0xc800
     ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio
     ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
HPT374: IDE controller on PCI bus 00 dev 99
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
HPT374: first interface base=0xd400, second interface base=0xdc00
     ide4: BM-DMA at 0xe400-0xe407, BIOS settings: hdi:pio, hdj:pio
     ide5: BM-DMA at 0xe408-0xe40f, BIOS settings: hdk:pio, hdl:pio
hda: Maxtor 6Y060L0, ATA DISK drive
hdc: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c017f304, I/O limit 4095Mb (mask 0xffffffff)
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, 
UDMA(133)
Partition check:
  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on VIA Apollo KT400 @ 0xd0000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on VIA Apollo KT400 @ 0xd0000000 128MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.30 time 12:09:38 Jun 14 2003
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xa000, IRQ 19
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xa400, IRQ 17
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xa800, IRQ 21
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xac00, IRQ 21
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xb000, IRQ 21
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
XFS mounting filesystem ide0(3,5)
Ending clean XFS mount for filesystem: ide0(3,5)
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
hub.c: new USB device 00:10.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x1604) is not claimed by any 
active driver.
Adding Swap: 514072k swap-space (priority -1)
via-rhine.c:v1.10-LK1.1.14  May-3-2002  Written by Donald Becker
   http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe8028000, 00:50:8d:fd:7c:fe, IRQ 16.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
   Vendor: CyberDrv  Model: CW038D CD-R/RW    Rev: 120C
   Type:   CD-ROM                             ANSI SCSI revision: 02
   Vendor: IDE       Model: DVD-ROM 16X       Rev: 1.32
   Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 4x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 16x/16x cd/rw xa/form2 cdda tray
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
XFS mounting filesystem ide0(3,6)
Ending clean XFS mount for filesystem: ide0(3,6)
XFS mounting filesystem ide0(3,7)
Ending clean XFS mount for filesystem: ide0(3,7)
XFS mounting filesystem ide0(3,8)
Ending clean XFS mount for filesystem: ide0(3,8)
XFS mounting filesystem ide0(3,9)
Ending clean XFS mount for filesystem: ide0(3,9)
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.

jak widac karte mam zaladowana.

a to z /var/log/everything/current dotyczacy dhcp:

[dhcpcd] timed out waiting for a valid DHCP server response
[rc-scripts] Failed to bring eth0 up
[rc-scripts] ERROR: Problem starting needed services.
[rc-scripts] "netmount" was not started.

i moj ifconfig eth0

eth0      Link encap:Ethernet  HWaddr 00:50:8D:FD:7C:FE
           BROADCAST MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:259 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
           Interrupt:16 Base address:0xc000


jeszcze mysle zeby wrzucic w ustawienia jajka config z jajka z plyty ale 
nie moge go znalezc i pozniej eliminowac rzeczy mi niepotrzebne.

przepraszam ze to takie dlugie ale ten brak sieci zaczyna byc wkurzajacy
i nie potrafie tego ugryzc.
tak na marginesie.pare dni temu instalowalem testowo pld z sieci i 
mialem ten sam problem.zainstalowalo sie a pozniej klops.siec lezala.

pozdrawiam







--
gentoo-user-pl@g.o mailing list