public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-user] No binary llvm-19.1.4 package
@ 2024-12-08 11:14 Jacques Montier
  2024-12-08 15:17 ` Eli Schwartz
  0 siblings, 1 reply; 7+ messages in thread
From: Jacques Montier @ 2024-12-08 11:14 UTC (permalink / raw
  To: gentoo-user@lists.gentoo.org


[-- Attachment #1.1.1: Type: text/plain, Size: 936 bytes --]

Hello all,

I have two Gentoo OS that are supposedly identical.
Since compiling LLVM takes a long time, I chose to install the binary
package llvm-19.1.4.
I successfully obtained the binary on one of the systems, but not on the
other.
The first one :
[image: image.png]

The other one :

[image: image.png]

If i try :
emerge -av --getbinpkgonly =sys-devel/llvm-19.1.4
i get this :
emerge: there are no binary packages to satisfy "=sys-devel/llvm-19.1.4"

The two configuration file gentoobinhost.conf are identical on both
systems.
sync-uri =
https://distfiles.gentoo.org/releases/amd64/binpackages/23.0/x86-64

make.conf file :
FEATURES="${FEATURES} binpkg-request-signature getbinpkg"

My emerge world :
emerge -auvDN  --with-bdeps=y --binpkg-respect-use=y --keep-going world

emerge --info for the second OS in an attached file.


Where could this difference be coming from?
Thank you in advance for your help.

Cheers,

--
Jacques

[-- Attachment #1.1.2: Type: text/html, Size: 1695 bytes --]

[-- Attachment #1.2: image.png --]
[-- Type: image/png, Size: 46658 bytes --]

[-- Attachment #1.3: image.png --]
[-- Type: image/png, Size: 38265 bytes --]

[-- Attachment #2: info.txt --]
[-- Type: text/plain, Size: 6511 bytes --]

Portage 3.0.66.1 (python 3.12.7-final-0, default/linux/amd64/23.0/desktop/systemd, gcc-14, glibc-2.40-r5, 6.12.3-gentoo x86_64)
=================================================================
System uname: Linux-6.12.3-gentoo-x86_64-Intel-R-_Core-TM-_i7_CPU_950_@_3.07GHz-with-glibc2.40
KiB Mem:    18415716 total,  11846936 free
KiB Swap:   12582908 total,  12582908 free
Timestamp of repository gentoo: Sun, 08 Dec 2024 10:30:00 +0000
Head commit of repository gentoo: aeca8ed4f6be32708096ab3ad8ff29ac9a4d377d
sh bash 5.2_p37
ld GNU ld (Gentoo 2.43 p3) 2.43.1
app-misc/pax-utils:        1.3.8::gentoo
app-shells/bash:           5.2_p37::gentoo
dev-build/autoconf:        2.13-r8::gentoo, 2.72-r1::gentoo
dev-build/automake:        1.16.5-r2::gentoo
dev-build/cmake:           3.30.6::gentoo
dev-build/libtool:         2.4.7-r4::gentoo
dev-build/make:            4.4.1-r100::gentoo
dev-build/meson:           1.5.2::gentoo
dev-lang/perl:             5.40.0::gentoo
dev-lang/python:           3.12.7_p1::gentoo, 3.13.0::gentoo
dev-lang/rust-bin:         1.81.0-r100::gentoo, 1.82.0-r100::gentoo
sys-apps/baselayout:       2.17::gentoo
sys-apps/sandbox:          2.39::gentoo
sys-apps/systemd:          256.7::gentoo
sys-devel/binutils:        2.43-r2::gentoo
sys-devel/binutils-config: 5.5.2::gentoo
sys-devel/clang:           18.1.8::gentoo
sys-devel/gcc:             14.2.1_p20241116::gentoo
sys-devel/gcc-config:      2.11::gentoo
sys-devel/llvm:            18.1.8-r1::gentoo
sys-kernel/linux-headers:  6.6-r1::gentoo (virtual/os-headers)
sys-libs/glibc:            2.40-r5::gentoo
Repositories:

gentoo
    location: /var/db/repos/gentoo
    sync-type: rsync
    sync-uri: rsync://rsync.gentoo.org/gentoo-portage
    priority: -1000
    volatile: False
    sync-rsync-extra-opts: 
    sync-rsync-verify-max-age: 3
    sync-rsync-verify-jobs: 1
    sync-rsync-verify-metamanifest: yes

Binary Repositories:

gentoobinhost
    priority: 1
    sync-uri: https://distfiles.gentoo.org/releases/amd64/binpackages/23.0/x86-64

ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/themes/oxygen-gtk/gtk-2.0"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php8.2/ext-active/ /etc/php/cgi-php8.2/ext-active/ /etc/php/cli-php8.2/ext-active/ /etc/php/fpm-php8.2/ext-active/ /etc/php/phpdbg-php8.2/ext-active/ /etc/revdep-rebuild /etc/sandbox.d"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GDK_PIXBUF_MODULE_FILE GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS="-march=native -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs binpkg-multi-instance binpkg-request-signature buildpkg-live candy config-protect-if-modified distlocks ebuild-locks fixlafiles getbinpkg ipc-sandbox merge-sync merge-wait multilib-strict network-sandbox news parallel-fetch pid-sandbox pkgdir-index-trusted preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=native -O2 -pipe"
GENTOO_MIRRORS="ftp://ftp.free.fr/mirrors/ftp.gentoo.org/     http://mirrors.ircam.fr/pub/gentoo-distfiles/"
LANG="fr_FR.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs"
LEX="flex"
LINGUAS="fr"
MAKEOPTS="-j8"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="X a52 aac acl acpi alsa amd64 bluetooth branding bzip2 cairo cdda cdr cet crypt cups dbus dri dts dvd dvdr encode exif flac gdbm gif gles1 gles2 gpm gtk gtk+extra gui iconv icu ipv6 jpeg kf6compat lcms libnotify libtirpc linguas_fr mad mmx mng mp3 mp4 mpeg multilib ncurses nls ogg opengl openmp pam pango pcre pdf png policykit ppds pulseaudio python qml qt5 qt6 readline sdl seccomp sound spell sse sse2 ssl startup-notification svg systemd test-rust tiff truetype udev udisks unicode upower usb vorbis vulkan wayland wxwidgets x264 xattr xcb xft xml xv xvid zlib" ABI_X86="64 32" ADA_TARGET="gcc_12" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_anon authn_dbm authn_file authz_dbm authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir env expires ext_filter file_cache filter headers include info log_config logio mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 popcnt sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax navcom oceanserver oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 tsip tripmate tnt ublox" GUILE_SINGLE_TARGET="3-0" GUILE_TARGETS="3-0" INPUT_DEVICES="evdev" KERNEL="linux" L10N="fr" LCD_DEVICES="bayrad cfontz glk hd44780 lb216 lcdm001 mtxorb text" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php8-2" POSTGRES_TARGETS="postgres16" PYTHON_SINGLE_TARGET="python3_12" PYTHON_TARGETS="python3_12" RUBY_TARGETS="ruby32" SANE_BACKENDS="epson2 hp" VIDEO_CARDS="nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipp2p iface geoip fuzzy condition tarpit sysrq proto logmark ipmark dhcpmac delude chaos account"
Unset:  ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EMERGE_DEFAULT_OPTS, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LFLAGS, LIBTOOL, MAKE, MAKEFLAGS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PYTHONPATH, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 11:14 [gentoo-user] No binary llvm-19.1.4 package Jacques Montier
@ 2024-12-08 15:17 ` Eli Schwartz
  2024-12-08 16:17   ` Jacques Montier
  2024-12-08 17:39   ` Dr Rainer Woitok
  0 siblings, 2 replies; 7+ messages in thread
From: Eli Schwartz @ 2024-12-08 15:17 UTC (permalink / raw
  To: gentoo-user


[-- Attachment #1.1: Type: text/plain, Size: 1524 bytes --]

On 12/8/24 6:14 AM, Jacques Montier wrote:
> I have two Gentoo OS that are supposedly identical.


If the entire contents of /etc/portage are identical, then in theory you
should always get the same packages on both machines. Is it just the
package list or the entire portage configuration that is identical?


> My emerge world :
> emerge -auvDN  --with-bdeps=y --binpkg-respect-use=y --keep-going world
> 
> emerge --info for the second OS in an attached file.
> 
> 
> Where could this difference be coming from?


Your use of --binpkg-respect-use=y deletes one form of diagnostic. The
default behavior of portage without that flag specified is for portage to:

- respect USE flags
- verbosely log a warning if binaries were ineligible due to USE flags

With that flag set to =y, the verbose warning log is disabled. That is all.

Can you try running emerge without that flag? It should print a message
that looks a bit like this:


!!! The following binary packages have been ignored due to non matching USE:

    =dev-lang/python-3.13.1 llvm_slot_18 -verify-sig
    =dev-lang/python-3.13.1 llvm_slot_18 -pgo -verify-sig

NOTE: The --binpkg-respect-use=n option will prevent emerge
      from ignoring these binary packages if possible.
      Using --binpkg-respect-use=y will silence this warning.

If the issue is USE flags, then that will tell you. The lines printed
are valid package.use lines which would cause you to start using that
binary package.


-- 
Eli Schwartz

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 15:17 ` Eli Schwartz
@ 2024-12-08 16:17   ` Jacques Montier
  2024-12-08 22:22     ` Peter Humphrey
  2024-12-08 17:39   ` Dr Rainer Woitok
  1 sibling, 1 reply; 7+ messages in thread
From: Jacques Montier @ 2024-12-08 16:17 UTC (permalink / raw
  To: gentoo-user

[-- Attachment #1: Type: text/plain, Size: 2078 bytes --]

Le dim. 8 déc. 2024 à 16:18, Eli Schwartz <eschwartz@gentoo.org> a écrit :

> On 12/8/24 6:14 AM, Jacques Montier wrote:
> > I have two Gentoo OS that are supposedly identical.
>
>
> If the entire contents of /etc/portage are identical, then in theory you
> should always get the same packages on both machines. Is it just the
> package list or the entire portage configuration that is identical?
>
>
> > My emerge world :
> > emerge -auvDN  --with-bdeps=y --binpkg-respect-use=y --keep-going world
> >
> > emerge --info for the second OS in an attached file.
> >
> >
> > Where could this difference be coming from?
>
>
> Your use of --binpkg-respect-use=y deletes one form of diagnostic. The
> default behavior of portage without that flag specified is for portage to:
>
> - respect USE flags
> - verbosely log a warning if binaries were ineligible due to USE flags
>
> With that flag set to =y, the verbose warning log is disabled. That is all.
>
> Can you try running emerge without that flag? It should print a message
> that looks a bit like this:
>
>
> !!! The following binary packages have been ignored due to non matching
> USE:
>
>     =dev-lang/python-3.13.1 llvm_slot_18 -verify-sig
>     =dev-lang/python-3.13.1 llvm_slot_18 -pgo -verify-sig
>
> NOTE: The --binpkg-respect-use=n option will prevent emerge
>       from ignoring these binary packages if possible.
>       Using --binpkg-respect-use=y will silence this warning.
>
> If the issue is USE flags, then that will tell you. The lines printed
> are valid package.use lines which would cause you to start using that
> binary package.
>
>
> --
> Eli Schwartz
>




Thank you Eli for your response.
I saw that the two directories /etc/portage were different, particularly
the make.conf files.
So i copied the first one to replace the second, and everything went back
to normal.
I would have difficulty detecting where the differences between the two
directories came from.
Nevertheless, thank you again for helping me.

Cheers,

--
Jacques

[-- Attachment #2: Type: text/html, Size: 3019 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 15:17 ` Eli Schwartz
  2024-12-08 16:17   ` Jacques Montier
@ 2024-12-08 17:39   ` Dr Rainer Woitok
  2024-12-08 17:47     ` Eli Schwartz
  1 sibling, 1 reply; 7+ messages in thread
From: Dr Rainer Woitok @ 2024-12-08 17:39 UTC (permalink / raw
  To: gentoo-user; +Cc: Eli Schwartz

Eli,

On Sun, 8 Dec 2024 10:17:50 -0500 you wrote:

> ...
> Your use of --binpkg-respect-use=y deletes one form of diagnostic. The
> default behavior of portage without that flag specified is for portage to:
> 
> - respect USE flags
> - verbosely log a warning if binaries were ineligible due to USE flags
> 
> With that flag set to =y, the verbose warning log is disabled. That is all.

I've seen this remark somewhere  and have therefore  removed this option
from my "make.conf" file already some time ago,  but I have still to see
this message.  Is it also issued with "--pretend" and does it go to std-
out or just to the log file?  If the former, it's probably suppressed by
the "--quiet" option in my "make.conf".  I will try with that option re-
moved.

Thanks for reminding me :-)

Sincerely,
  Rainer


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 17:39   ` Dr Rainer Woitok
@ 2024-12-08 17:47     ` Eli Schwartz
  0 siblings, 0 replies; 7+ messages in thread
From: Eli Schwartz @ 2024-12-08 17:47 UTC (permalink / raw
  To: Dr Rainer Woitok, gentoo-user


[-- Attachment #1.1: Type: text/plain, Size: 1061 bytes --]

On 12/8/24 12:39 PM, Dr Rainer Woitok wrote:
> Eli,
> 
> On Sun, 8 Dec 2024 10:17:50 -0500 you wrote:
> 
>> ...
>> Your use of --binpkg-respect-use=y deletes one form of diagnostic. The
>> default behavior of portage without that flag specified is for portage to:
>>
>> - respect USE flags
>> - verbosely log a warning if binaries were ineligible due to USE flags
>>
>> With that flag set to =y, the verbose warning log is disabled. That is all.
> 
> I've seen this remark somewhere  and have therefore  removed this option
> from my "make.conf" file already some time ago,  but I have still to see
> this message.  Is it also issued with "--pretend" and does it go to std-
> out or just to the log file?  If the former, it's probably suppressed by
> the "--quiet" option in my "make.conf".  I will try with that option re-
> moved.
> 
> Thanks for reminding me :-)
> 
> Sincerely,
>   Rainer


Yes, with emerge --pretend it will still print the same message to the
console. It will be suppressed by --quiet.


-- 
Eli Schwartz

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 16:17   ` Jacques Montier
@ 2024-12-08 22:22     ` Peter Humphrey
  2024-12-09  9:42       ` Jacques Montier
  0 siblings, 1 reply; 7+ messages in thread
From: Peter Humphrey @ 2024-12-08 22:22 UTC (permalink / raw
  To: gentoo-user

On Sunday 8 December 2024 16:17:15 GMT Jacques Montier wrote:

> I saw that the two directories /etc/portage were different, particularly
> the make.conf files. So i copied the first one to replace the second, and
> everything went back to normal.
>
> I would have difficulty detecting where the differences between the two
> directories came from.

Have you looked into meld? http://meldmerge.org/

-- 
Regards,
Peter.





^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] No binary llvm-19.1.4 package
  2024-12-08 22:22     ` Peter Humphrey
@ 2024-12-09  9:42       ` Jacques Montier
  0 siblings, 0 replies; 7+ messages in thread
From: Jacques Montier @ 2024-12-09  9:42 UTC (permalink / raw
  To: gentoo-user

[-- Attachment #1: Type: text/plain, Size: 785 bytes --]

Le dim. 8 déc. 2024 à 23:23, Peter Humphrey <peter@prh.myzen.co.uk> a
écrit :

> On Sunday 8 December 2024 16:17:15 GMT Jacques Montier wrote:
>
> > I saw that the two directories /etc/portage were different, particularly
> > the make.conf files. So i copied the first one to replace the second, and
> > everything went back to normal.
> >
> > I would have difficulty detecting where the differences between the two
> > directories came from.
>
> Have you looked into meld? http://meldmerge.org/
>
> --
> Regards,
> Peter.
>
>
> I used diff and it was rather confusing.
I didn't know about the meld application, and it seems much clearer to me.
I need to learn how to use it without causing any damage ! 😉

Thanks a lot, Peter,

Regards,

--
Jacques

[-- Attachment #2: Type: text/html, Size: 1647 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2024-12-09  9:43 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-12-08 11:14 [gentoo-user] No binary llvm-19.1.4 package Jacques Montier
2024-12-08 15:17 ` Eli Schwartz
2024-12-08 16:17   ` Jacques Montier
2024-12-08 22:22     ` Peter Humphrey
2024-12-09  9:42       ` Jacques Montier
2024-12-08 17:39   ` Dr Rainer Woitok
2024-12-08 17:47     ` Eli Schwartz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox