1 |
Hello Dan, |
2 |
|
3 |
Am Mittwoch, 22. März 2017, 13:37:43 schrieb Daniel Frey: |
4 |
> On 03/22/2017 08:12 AM, Petric Frank wrote: |
5 |
> > maybe this is not exactly a gentoo problem. Please point me to |
6 |
correct |
7 |
> > location if i am wrong here. |
8 |
> > |
9 |
> > I've got a MCE-like ir remote together with a USB receiver. |
10 |
> > |
11 |
> > Looks like it is detected by the kernel and a input device was created. |
12 |
> > |
13 |
> > Most of the keys are working. But - for example - the color buttons do |
14 |
not |
15 |
> > |
16 |
> > generate any output. |
17 |
> > |
18 |
> > "ir-keytable" (version 1.10.1) returns: |
19 |
> > |
20 |
> > Couldn't find any node at /sys/class/rc/rc*. |
21 |
> > |
22 |
> > "ir-keytable -d /dev/input/eventxx" gives as output: |
23 |
> > |
24 |
> > Name: PHILIPS MCE USB IR Receiver- Spi |
25 |
> > bus: 3, vendor/product: 0471:0613, version: 0x0100 |
26 |
> > |
27 |
> > Using for test |
28 |
> > |
29 |
> > ir-keytable -d /dev/input/eventxx -r |
30 |
> > |
31 |
> > i got: |
32 |
> > |
33 |
> > ------------------- cut -------------------- |
34 |
> > |
35 |
> > scancode 0x700e0 = KEY_LEFTCTRL (0x1d) |
36 |
> > ... |
37 |
> > |
38 |
> > Enabled protocols: other lirc rc-5 jvc sony nec sanyo mce-kbd rc-6 |
39 |
sharp |
40 |
> > xmp |
41 |
> > ------------------- cut -------------------- |
42 |
> > |
43 |
> > But there is no definition of the color buttons in the list above. |
44 |
> > |
45 |
> > Tests were done using this command: |
46 |
> > |
47 |
> > ir-keytable -d /dev/input/eventxx -t |
48 |
> > |
49 |
> > Any hints ? |
50 |
> > |
51 |
> > |
52 |
> > Is it possibe to see the scancodes received by the USB-receiver to |
53 |
> > validate |
54 |
> > |
55 |
> > that the remote really sends data for the color buttons. What kernel |
56 |
> > options i have to enable ? |
57 |
> > |
58 |
> > (Also for checking and not barking at the wrong tree due to hardware |
59 |
> > problems) |
60 |
> > |
61 |
> > Some info about my system: |
62 |
> > |
63 |
> > Kernel 4.9.6 (amd64) custom configured |
64 |
> > |
65 |
> > Distribution: Gentoo |
66 |
> > |
67 |
> > lsmod output: |
68 |
> > |
69 |
> > ----------------------- cut -------------------------- |
70 |
> > |
71 |
> > Module Size Used by |
72 |
> > |
73 |
> > rc_rc6_mce 1580 0 |
74 |
> > mceusb 10365 0 |
75 |
> > rc_core 16719 2 mceusb,rc_rc6_mce |
76 |
> > usb_storage 48619 0 |
77 |
> > hid_generic 1385 0 |
78 |
> > usbhid 35380 0 |
79 |
> > input_leds 3022 0 |
80 |
> > led_class 3975 1 input_leds |
81 |
> > |
82 |
> > ohci_pci 3272 0 |
83 |
> > |
84 |
> > snd_hda_codec_generic 52071 2 |
85 |
> > r8169 67900 0 |
86 |
> > xhci_pci 4958 0 |
87 |
> > xhci_hcd 101734 1 xhci_pci |
88 |
> > mii 4099 1 r8169 |
89 |
> > ohci_hcd 27022 1 ohci_pci |
90 |
> > ehci_pci 4103 0 |
91 |
> > ehci_hcd 41036 1 ehci_pci |
92 |
> > usbcore 165285 9 |
93 |
> > |
94 |
mceusb,usbhid,usb_storage,ehci_hcd,ohci_pci,xhci_pci,ohci_hcd,xhci_hcd,e |
95 |
hc |
96 |
> > i_pci usb_common 2222 1 usbcore |
97 |
> > snd_hda_intel 18065 0 |
98 |
> > snd_hda_codec 73835 2 snd_hda_intel,snd_hda_codec_generic |
99 |
> > snd_hwdep 5866 1 snd_hda_codec |
100 |
> > snd_hda_core 40055 3 |
101 |
> > snd_hda_intel,snd_hda_codec,snd_hda_codec_generic |
102 |
> > snd_pcm 78737 3 |
103 |
snd_hda_intel,snd_hda_codec,snd_hda_core |
104 |
> > snd_timer 19336 1 snd_pcm |
105 |
> > snd 55051 6 |
106 |
> > |
107 |
snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_gener |
108 |
ic,snd_ |
109 |
> > pcm soundcore 5231 1 snd |
110 |
> > ----------------------- cut -------------------------- |
111 |
> > |
112 |
> > The remote looks like this one: |
113 |
> > |
114 |
> > https://www.mythtv.org/wiki/File:Philips-remote.jpg |
115 |
> > |
116 |
> > but its branded as olidata. |
117 |
> > |
118 |
> > The receiver is detected as (syslog): |
119 |
> > ----------------------- cut -------------------------- |
120 |
> > |
121 |
> > [ 6.937470] usb 4-2: new low-speed USB device number 3 using |
122 |
xhci_hcd |
123 |
> > |
124 |
> > [ 7.117723] usb 4-2: New USB device found, idVendor=0471, |
125 |
idProduct=0613 |
126 |
> > |
127 |
> > [ 7.117730] usb 4-2: New USB device strings: Mfr=1, Product=2, |
128 |
> > SerialNumber=0 |
129 |
> > |
130 |
> > [ 7.117735] usb 4-2: Product: MCE USB IR Receiver- Spinel plus |
131 |
> > |
132 |
> > [ 7.117740] usb 4-2: Manufacturer: PHILIPS |
133 |
> > |
134 |
> > [ 7.132840] input: PHILIPS MCE USB IR Receiver- Spinel plus as |
135 |
> > |
136 |
> > |
137 |
/devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb4/4-2/4-2:1.0/0003:047 |
138 |
1:0 |
139 |
> > 613.0003/input/input19 |
140 |
> > |
141 |
> > |
142 |
> > [ 7.185141] hid-generic 0003:0471:0613.0003: input,hiddev0,hidraw2: |
143 |
USB |