Gentoo Archives: gentoo-user

From: Arend von der Lieth <lieth@×××××××××××.de>
To: gentoo-user@l.g.o
Subject: Re: [gentoo-user] ALSA problems after UDEV-103 upgrade [SOLVED]
Date: Mon, 18 Dec 2006 20:20:48
Message-Id: 200612182112.41933.lieth@fh-muenster.de
1 Hi Mark,
2 Mark Knecht wrote:
3
4 > That appears to be a testing version of udev. Do you always run testing?
5 >
6 > As for the mixer message please try removing /etc/asound.state and
7 > then restarting Alsa. You will probably need to set mixer levels using
8 > alsamixer or whatever mixer is appropriate for this device.
9
10 Wow, I cannot believe that it was that easy (after all I tried). Thank you
11 very much.
12
13 Now there is just a minor problem that my MIDI device is not detected
14 correctly, but that's not that crucial.
15
16 I O U a Br,
17 Arend
18
19 >
20 > Good luck,
21 > Mark
22 >
23 > On 12/17/06, Arend von der Lieth <lieth@×××××××××××.de> wrote:
24 >> Hi all,
25 >>
26 >> After upgrading to udev-103 I had some problems with mouse and sound.
27 >> While I was able to fix the first issue myself, I am now stuck in the
28 >> sound problem:
29 >> I followed the gentoo alsa guide, checked all settings in the kernel,
30 >> even upgraded the kernel from 2.6.15 to 2.6.18 (hoping that this would
31 >> help, but still no success). Now, I guess that it's a problem with
32 >> missing device nodes (the directories snd/ or sound/ do not exist in
33 >> /dev). When running alsaconf I get the following error message (which is
34 >> the same during boot):
35 >>
36 >> Running modules-update...
37 >> Loading driver...
38 >> * Loading ALSA modules ...
39 >> * Loading: snd-card-0 ... [ ok ]
40 >> * Loading: snd-seq-oss ... [ ok ]
41 >> * Loading: snd-pcm-oss ... [ ok ]
42 >> * Loading: snd-emu10k1-synth ... [ ok ]
43 >> * Loading: snd-seq-midi ... [ ok ]
44 >> * Restoring Mixer Levels ...
45 >> /usr/sbin/alsactl: load_state:1341: Cannot find soundcard '0'...
46 >> * Errors while restoring defaults, ignoring [ ok ]
47 >> Setting default volumes...
48 >> amixer: Mixer attach default error: No such device
49 >>
50 >> "cat /proc/asound/cards" yields:
51 >> 0 [Live ]: EMU10K1 - SBLive! Value [CT4780]
52 >> SBLive! Value [CT4780] (rev.10,
53 >> serial:0x80221102) at 0xece0, irq 201
54 >>
55 >> "lsmod | grep snd" returns:
56 >>
57 >> snd_seq_midi 8864 0
58 >> snd_emu10k1_synth 7552 0
59 >> snd_emux_synth 33664 1 snd_emu10k1_synth
60 >> snd_seq_virmidi 6912 1 snd_emux_synth
61 >> snd_seq_midi_emul 6912 1 snd_emux_synth
62 >> snd_pcm_oss 42784 0
63 >> snd_mixer_oss 16896 1 snd_pcm_oss
64 >> snd_seq_dummy 3972 0
65 >> snd_seq_oss 31872 0
66 >> snd_seq_midi_event 7168 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
67 >> snd_seq 47568 9
68 >> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,
69 >>
70 snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,
71 >> snd_seq_midi_event
72 >> snd_emu10k1 118592 1 snd_emu10k1_synth
73 >> snd_rawmidi 23840 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
74 >> snd_ac97_codec 92320 1 snd_emu10k1
75 >> snd_ac97_bus 2432 1 snd_ac97_codec
76 >> snd_pcm 74248 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
77 >> snd_seq_device 8332 8 snd_seq_midi,snd_emu10k1_synth,
78 >> snd_emux_synth,snd_seq_dummy,snd_seq_oss,
79 >> snd_seq,snd_emu10k1,snd_rawmidi
80 >> snd_timer 22020 3 snd_seq,snd_emu10k1,snd_pcm
81 >> snd_page_alloc 10376 2 snd_emu10k1,snd_pcm
82 >> snd_util_mem 4992 2 snd_emux_synth,snd_emu10k1
83 >> snd_hwdep 9348 2 snd_emux_synth,snd_emu10k1
84 >> snd 49636 13
85 >> snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,
86 >>
87 snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,
88 >> snd_rawmidi,snd_ac97_codec,snd_pcm,
89 >> snd_seq_device,snd_timer,snd_hwdep
90 >> soundcore 9568 1 snd
91 >>
92 >> Can anybody point me to the right direction where I should look at?
93 >>
94 >> Thanks in advance,
95 >> Arend
96 >> --
97 >> gentoo-user@g.o mailing list
98 >>
99 >>
100 --
101 gentoo-user@g.o mailing list

Replies

Subject Author
Re: [gentoo-user] ALSA problems after UDEV-103 upgrade [SOLVED] Mark Knecht <markknecht@×××××.com>