1 |
Hello, |
2 |
|
3 |
I have a 4M sandisk card and need advice on what to put |
4 |
in the /etc/conf.d/hdparm file. |
5 |
|
6 |
Here's the hardware |
7 |
CompactFlash ATA device |
8 |
Model Number: SanDisk SDCFB-4096 |
9 |
Serial Number: 003416B2397F2159 |
10 |
Firmware Revision: HDX 4.03 |
11 |
Standards: |
12 |
Supported: 4 |
13 |
Likely used: 4 |
14 |
Configuration: |
15 |
Logical max current |
16 |
cylinders 7964 7964 |
17 |
heads 16 16 |
18 |
sectors/track 63 63 |
19 |
-- |
20 |
CHS current addressable sectors: 8027712 |
21 |
LBA user addressable sectors: 8027712 |
22 |
device size with M = 1024*1024: 3919 MBytes |
23 |
device size with M = 1000*1000: 4110 MBytes (4 GB) |
24 |
Capabilities: |
25 |
LBA, IORDY(may be)(cannot be disabled) |
26 |
Standby timer values: spec'd by Vendor |
27 |
R/W multiple sector transfer: Max = 4 Current = 4 |
28 |
DMA: mdma0 mdma1 mdma2 (?) |
29 |
Cycle time: min=120ns recommended=120ns |
30 |
PIO: pio0 pio1 pio2 pio3 pio4 |
31 |
Cycle time: no flow control=120ns IORDY flow control=120ns |
32 |
Commands/features: |
33 |
Enabled Supported: |
34 |
* CFA feature set |
35 |
|
36 |
|
37 |
|
38 |
|
39 |
Any suggestion as to what to put in the /etc/conf.d/hdparm file are |
40 |
most welcome. |
41 |
|
42 |
It's running gentoo just fine with the default entries.... |