| 1 |
Nick Rout wrote: |
| 2 |
|
| 3 |
>Jamie. we seem to be following each other around the mailing lists. CLUG, mythtv, now here. |
| 4 |
> |
| 5 |
>You seem to have all the modules loaded, what is not working? |
| 6 |
> |
| 7 |
>is there a /dev/video/video0? |
| 8 |
>does xawtv -c /dev/video/video0 give any output? |
| 9 |
> |
| 10 |
> |
| 11 |
> |
| 12 |
Output of xawtv -c /dev/video0 |
| 13 |
|
| 14 |
This is xawtv-3.94, running on Linux/i686 (2.6.12-gentoo-r6) |
| 15 |
WARNING: Your X-Server has no DGA support. |
| 16 |
WARNING: couldn't find framebuffer base address, try manual |
| 17 |
configuration ("v4l-conf -a <addr>") |
| 18 |
v4l2: open /dev/video0: Permission denied |
| 19 |
v4l2: open /dev/video0: Permission denied |
| 20 |
v4l: open /dev/video0: Permission denied |
| 21 |
no video grabber device available |
| 22 |
|
| 23 |
> |
| 24 |
>On Tue, 19 Jul 2005 14:20:48 +1200 (NZST) |
| 25 |
>Jamie Dobbs wrote: |
| 26 |
> |
| 27 |
> |
| 28 |
> |
| 29 |
>>I've been working on this for several days but do not seem to make any |
| 30 |
>>progress. |
| 31 |
>>I have a Pinnacle PCTV Stereo card which is based on the Philips saa7134 |
| 32 |
>>chip. I have recomipled my kernel (2.6.12-gentoo-r6) to include the |
| 33 |
>>saa7134 module and i2c support as a module. |
| 34 |
>> |
| 35 |
>>lsmod output : |
| 36 |
>> |
| 37 |
>>Module Size Used by |
| 38 |
>>tda9887 13144 0 |
| 39 |
>>saa7134 102996 0 |
| 40 |
>>tuner 26920 0 |
| 41 |
>>video_buf 17924 1 saa7134 |
| 42 |
>>v4l2_common 5184 1 saa7134 |
| 43 |
>>v4l1_compat 14084 1 saa7134 |
| 44 |
>>ir_common 6660 1 saa7134 |
| 45 |
>>videodev 7808 1 saa7134 |
| 46 |
>> |
| 47 |
>>Relevant entries added to my /etc/modules.conf after modules-update is run: |
| 48 |
>>(I am in New Zealand and know that card number and tuner number are |
| 49 |
>>correct as I have had this card working in Mandrake 10.1 a week or so ago) |
| 50 |
>> |
| 51 |
>>### modules-update: start processing /etc/modules.d/saa7134 |
| 52 |
>>options saa7134 card=26 tuner=5 oss=1 |
| 53 |
>> |
| 54 |
>>### modules-update: end processing /etc/modules.d/saa7134 |
| 55 |
>> |
| 56 |
>>### modules-update: start processing /etc/modules.d/tda9887 |
| 57 |
>>options tda9887 qss=0 |
| 58 |
>> |
| 59 |
>>### modules-update: end processing /etc/modules.d/tda9887 |
| 60 |
>> |
| 61 |
>>My Kernel .config file can be found at |
| 62 |
>>http://drgnfire.orcon.net.nz/kernel_config |
| 63 |
>> |
| 64 |
>>I'd appreciate any feedback on what I might be doing wrong that is causing |
| 65 |
>>the TV Card not to work. |
| 66 |
>> |
| 67 |
>>Once I have the card working my aim is to build a MythTV box using this |
| 68 |
>>card, so any pointers on this would also be appreciated (especially from |
| 69 |
>>anyone in New Zealand who has experience in this area). |
| 70 |
>> |
| 71 |
>>Thanks |
| 72 |
>> |
| 73 |
>>Jamie |
| 74 |
>> |
| 75 |
>> |
| 76 |
>>-- |
| 77 |
>>gentoo-user@g.o mailing list |
| 78 |
>> |
| 79 |
>> |
| 80 |
> |
| 81 |
> |
| 82 |
> |
| 83 |
|
| 84 |
-- |
| 85 |
gentoo-user@g.o mailing list |
Archives