1 |
James wrote: |
2 |
> Hello, |
3 |
> |
4 |
> Currently, I manage gentoo system that have a variety of 10 and 100 MB/s |
5 |
> ethernet cards. I use lshw to distinguish the max ethernet port speed: |
6 |
> |
7 |
<snip> |
8 |
> |
9 |
> Is this reliable? What if a 10/100 card is plugged into a 10MB/s hub? |
10 |
|
11 |
Have you tried mii-tool? |
12 |
|
13 |
quasar ~ # mii-tool -v int0 |
14 |
int0: negotiated 1000baseT-FD flow-control, link ok |
15 |
product info: Yukon 88E1011 rev 5 |
16 |
basic mode: autonegotiation enabled |
17 |
basic status: autonegotiation complete, link ok |
18 |
capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD |
19 |
advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control |
20 |
link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control |
21 |
|
22 |
-- |
23 |
Ricardo Saffi Marques |
24 |
http://www.las.ic.unicamp.br/~saffi/ |
25 |
====================================================== |
26 |
Laboratory of System Administration and Security - LAS |
27 |
Institute of Computing - IC |
28 |
P.O. Box: 6176 |
29 |
University of Campinas - UNICAMP |
30 |
13083-852, Campinas, SP, Brazil |
31 |
====================================================== |