| 1 |
Hi all, |
| 2 |
|
| 3 |
I've found that when I run ip link show on my box it gives me: |
| 4 |
|
| 5 |
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN |
| 6 |
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 |
| 7 |
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo |
| 8 |
inet6 ::1/128 scope host |
| 9 |
valid_lft forever preferred_lft forever |
| 10 |
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state |
| 11 |
UP qlen 100 |
| 12 |
link/ether 00:0d:60:91:03:1f brd ff:ff:ff:ff:ff:ff |
| 13 |
inet 192.168.1.11/24 brd 192.168.1.255 scope global eth0 |
| 14 |
inet6 fe80::20d:60ff:fe91:31f/64 scope link |
| 15 |
valid_lft forever preferred_lft forever |
| 16 |
3: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN |
| 17 |
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff |
| 18 |
4: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN |
| 19 |
link/ether 8a:3c:77:a9:b5:c0 brd ff:ff:ff:ff:ff:ff |
| 20 |
5: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32 |
| 21 |
link/ether 8e:cf:e3:61:30:ea brd ff:ff:ff:ff:ff:ff |
| 22 |
6: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32 |
| 23 |
link/ether 8e:ba:b0:96:8e:d7 brd ff:ff:ff:ff:ff:ff |
| 24 |
7: teql0: <NOARP> mtu 1500 qdisc noop state DOWN qlen 100 |
| 25 |
link/void |
| 26 |
8: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN |
| 27 |
link/ipip 0.0.0.0 brd 0.0.0.0 |
| 28 |
9: gre0: <NOARP> mtu 1476 qdisc noop state DOWN |
| 29 |
link/gre 0.0.0.0 brd 0.0.0.0 |
| 30 |
10: sit0: <NOARP> mtu 1480 qdisc noop state DOWN |
| 31 |
link/sit 0.0.0.0 brd 0.0.0.0 |
| 32 |
|
| 33 |
|
| 34 |
but I expected only lo and eth0 as I did not configured the others. How |
| 35 |
could I get rid of the rest of interfaces? |
| 36 |
|
| 37 |
Thanks a lot. |
| 38 |
|
| 39 |
R. |
Archives