1 |
I have been using a kworld dvb usb stick for some time, and after a disk |
2 |
crash decided to move it to a new system, but cant get it to work. I am |
3 |
not sure if I am looking at an eudev, or a kernel 3.8.3 problem. |
4 |
|
5 |
> [ 5080.420044] usb 4-1: new high-speed USB device number 8 using ehci-pci |
6 |
> [ 5080.574646] usb 4-1: New USB device found, idVendor=15a4, idProduct=9016 |
7 |
> [ 5080.574650] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
8 |
> [ 5080.574652] usb 4-1: Product: DVB-T 2 |
9 |
> [ 5080.574653] usb 4-1: Manufacturer: Afatech |
10 |
> [ 5080.574655] usb 4-1: SerialNumber: 010101010600001 |
11 |
> [ 5080.577795] usb 4-1: dvb_usb_v2: found a 'Afatech AF9015 reference design' in cold state |
12 |
> [ 5080.577852] usb 4-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw' |
13 |
> [ 5080.577863] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 |
14 |
> [ 5080.578115] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb4/4-1/4-1:1.1/input/input11 |
15 |
> [ 5080.578268] hid-generic 0003:15A4:9016.000A: input,hidraw2: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-1/input1 |
16 |
> [ 5080.645771] usb 4-1: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state |
17 |
> [ 5081.019572] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer |
18 |
> [ 5081.019642] DVB: registering new adapter (Afatech AF9015 reference design) |
19 |
> [ 5081.026145] i2c i2c-5: af9013: firmware version 4.95.0.0 |
20 |
> [ 5081.029019] usb 4-1: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... |
21 |
> [ 5081.035600] usb 4-1: dvb_usb_af9015: command failed=2 |
22 |
> [ 5081.035603] i2c i2c-5: tda18218: i2c rd failed=-5 reg=00 len=1 |
23 |
> [ 5081.035680] usb 4-1: dvb_usb_v2: 'Afatech AF9015 reference design' error while loading driver (-19) |
24 |
> [ 5081.035939] usb 4-1: dvb_usb_v2: 'Afatech AF9015 reference design' successfully deinitialized and disconnected |
25 |
> olympus ~ # |
26 |
|
27 |
|
28 |
No /dev/dvb or /dev/video0 nodes are created, but that could be because |
29 |
of the tuner error (tda18218). The same now occurs on the old system |
30 |
(which I dont trust as a lot is broken with it), and I suspect it |
31 |
started when I moved to eudev ... but of course cant prove it :( |
32 |
|
33 |
Any suggestions welcome. |
34 |
|
35 |
BillK |