| 1 |
On an older server the customer replaced a SAS drive. |
| 2 |
|
| 3 |
I see it as /dev/sg11, but not yes as /dev/sdX, it is not visible in "lsblk" |
| 4 |
|
| 5 |
Back then with an installed Suse Linux, I had some GUI tool to create a |
| 6 |
VD on top of the physical drive and "enable" it ... |
| 7 |
|
| 8 |
I am searching how to achieve that in gentoo now. |
| 9 |
|
| 10 |
- |
| 11 |
|
| 12 |
# lsscsi |
| 13 |
|
| 14 |
[1:1:0:0] disk TOSHIBA MG04SCA20EE 0104 - |
| 15 |
|
| 16 |
I *assume* that it is connected to the RAID bus controller: Adaptec AAC-RAID |
| 17 |
|
| 18 |
but when I run "arcconf" I only get segfaults. |
| 19 |
|
| 20 |
# lspci |
| 21 |
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller |
| 22 |
Hub (rev b1) |
| 23 |
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 |
| 24 |
Port 2-3 (rev b1) |
| 25 |
00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 |
| 26 |
Port 4-5 (rev b1) |
| 27 |
00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 |
| 28 |
Port 6-7 (rev b1) |
| 29 |
00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA |
| 30 |
Engine (rev b1) |
| 31 |
00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers |
| 32 |
(rev b1) |
| 33 |
00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers |
| 34 |
(rev b1) |
| 35 |
00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers |
| 36 |
(rev b1) |
| 37 |
00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved |
| 38 |
Registers (rev b1) |
| 39 |
00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved |
| 40 |
Registers (rev b1) |
| 41 |
00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers |
| 42 |
(rev b1) |
| 43 |
00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers |
| 44 |
(rev b1) |
| 45 |
00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI |
| 46 |
Express Root Port 1 (rev 09) |
| 47 |
00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset |
| 48 |
UHCI USB Controller #1 (rev 09) |
| 49 |
00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset |
| 50 |
UHCI USB Controller #2 (rev 09) |
| 51 |
00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset |
| 52 |
UHCI USB Controller #3 (rev 09) |
| 53 |
00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset |
| 54 |
EHCI USB2 Controller (rev 09) |
| 55 |
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) |
| 56 |
00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC |
| 57 |
Interface Controller (rev 09) |
| 58 |
00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller |
| 59 |
(rev 09) |
| 60 |
00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus |
| 61 |
Controller (rev 09) |
| 62 |
01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express |
| 63 |
Upstream Port (rev 01) |
| 64 |
01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to |
| 65 |
PCI-X Bridge (rev 01) |
| 66 |
02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express |
| 67 |
Downstream Port E1 (rev 01) |
| 68 |
02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express |
| 69 |
Downstream Port E3 (rev 01) |
| 70 |
03:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge |
| 71 |
A (rev 09) |
| 72 |
03:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge |
| 73 |
B (rev 09) |
| 74 |
06:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit |
| 75 |
Ethernet Controller (Copper) (rev 01) |
| 76 |
06:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit |
| 77 |
Ethernet Controller (Copper) (rev 01) |
| 78 |
07:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X |
| 79 |
Fusion-MPT Dual Ultra320 SCSI (rev 08) |
| 80 |
09:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCIe Express to |
| 81 |
PCI-X bridge |
| 82 |
09:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCIe Express to |
| 83 |
PCI-X bridge |
| 84 |
0a:0e.0 RAID bus controller: Adaptec AAC-RAID |
| 85 |
0d:01.0 VGA compatible controller: Advanced Micro Devices, Inc. |
| 86 |
[AMD/ATI] ES1000 (rev 02) |
| 87 |
|
| 88 |
|
| 89 |
-- |
| 90 |
|
| 91 |
Or it is connected to the "LSI Logic / Symbios Logic 53c1030" ? |
| 92 |
|
| 93 |
|
| 94 |
|
| 95 |
# megacli -PDList -Aall |
| 96 |
|
| 97 |
|
| 98 |
Exit Code: 0x00 |
| 99 |
|
| 100 |
hmm ... scratching my head here, could someone help me to determine |
| 101 |
where these drives "come from" ? |
| 102 |
|
| 103 |
The goal: enable that new TOSHIBA drive, partition it and add it to the |
| 104 |
mdadm-arrays. |
| 105 |
|
| 106 |
|
| 107 |
# lsscsi |
| 108 |
[0:0:1:0] tape HP Ultrium 4-SCSI B12H /dev/st0 |
| 109 |
[0:0:1:1] mediumx OVERLAND NEO Series 0510 /dev/sch0 |
| 110 |
[1:0:1:0] disk ICP SAS2 V1.0 /dev/sda |
| 111 |
[1:0:2:0] disk ICP Device 2 V1.0 /dev/sdb |
| 112 |
[1:0:3:0] disk ICP Device 3 V1.0 /dev/sdc |
| 113 |
[1:0:4:0] disk ICP Device 4 V1.0 /dev/sdd |
| 114 |
[1:0:5:0] disk ICP Device 5 V1.0 /dev/sde |
| 115 |
[1:0:6:0] disk ICP Device 6 V1.0 /dev/sdf |
| 116 |
[1:0:7:0] disk ICP Device 7 V1.0 /dev/sdg |
| 117 |
[1:0:8:0] disk ICP Device 8 V1.0 /dev/sdh |
| 118 |
[1:0:9:0] disk ICP Device 9 V1.0 /dev/sdi |
| 119 |
[1:1:0:0] disk TOSHIBA MG04SCA20EE 0104 - |
| 120 |
[1:1:1:0] disk SEAGATE ST373455SS 0002 - |
| 121 |
[1:1:3:0] disk WDC WD7500AZEX-00RKK 0A80 - |
| 122 |
[1:1:4:0] disk WDC WD7500AZEX-00RKK 0A80 - |
| 123 |
[1:1:5:0] disk WDC WD7500AZEX-00RKK 0A80 - |
| 124 |
[1:1:6:0] disk WDC WD7500AZEX-00BN5 1A01 - |
| 125 |
[1:1:7:0] disk WDC WD7500AZEX-00BN5 1A01 - |
| 126 |
[1:1:8:0] disk WDC WD7500AZEX-00RKK 0A80 - |
| 127 |
[1:1:9:0] disk ST375052 8AS CC44 - |
| 128 |
[1:1:10:0] disk WDC WD7500AZEX-00BN5 1A01 - |
| 129 |
[1:1:11:0] disk WDC WD7500AZEX-00BN5 1A01 - |
Archives