| 1 |
Hello, |
| 2 |
|
| 3 |
Here is the scenario: |
| 4 |
-wireless card: Intel PRO/WIRELESS 3945ABG |
| 5 |
-lsmod | grep 3945 |
| 6 |
iwl3945 144628 0 |
| 7 |
mac80211 108932 1 iwl3945 |
| 8 |
-iwlist |
| 9 |
wlan0 Scan completed : |
| 10 |
Cell 01 - Address: 00:17:9A:F4:CE:B5 |
| 11 |
ESSID:"a" |
| 12 |
Mode:Master |
| 13 |
Channel:6 |
| 14 |
Frequency:2.437 GHz (Channel 6) |
| 15 |
Quality=33/100 Signal level=-89 dBm Noise level=-127 dBm |
| 16 |
Encryption key:off |
| 17 |
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s |
| 18 |
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s |
| 19 |
48 Mb/s; 54 Mb/s |
| 20 |
Extra:tsf=00000085815e4183 |
| 21 |
Cell 02 - Address: 00:1D:7E:E3:8C:DD |
| 22 |
ESSID:"baladei-wifi" |
| 23 |
Mode:Master |
| 24 |
Channel:11 |
| 25 |
Frequency:2.462 GHz (Channel 11) |
| 26 |
Quality=97/100 Signal level=-28 dBm Noise level=-127 dBm |
| 27 |
Encryption key:on |
| 28 |
IE: WPA Version 1 |
| 29 |
Group Cipher : CCMP |
| 30 |
Pairwise Ciphers (1) : CCMP |
| 31 |
Authentication Suites (1) : PSK |
| 32 |
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s |
| 33 |
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s |
| 34 |
12 Mb/s; 48 Mb/s |
| 35 |
Extra:tsf=0000000b865b4049 |
| 36 |
|
| 37 |
(I WANT TO CONNECT TO CELL2-baladei-wifi) |
| 38 |
|
| 39 |
|
| 40 |
-cat /etc/wpa_supplicant/wpa_supplicant.conf |
| 41 |
ctrl_interface=/var/run/wpa_supplicant |
| 42 |
ctrl_interface_group=wheel |
| 43 |
update_config=0 |
| 44 |
fast_reauth=1 |
| 45 |
|
| 46 |
network={ |
| 47 |
ssid="baladei-wifi" |
| 48 |
proto=WPA |
| 49 |
key_mgmt=WPA-PSK |
| 50 |
pairwise=CCMP TKIP |
| 51 |
group=CCMP TKIP WEP |
| 52 |
psk="my-password" |
| 53 |
priority=5 |
| 54 |
} |
| 55 |
|
| 56 |
-cat /etc/conf.d/net |
| 57 |
modules_wlan0=("dhcpcd" "iwconfig") |
| 58 |
wpa_supplicant_wlan0="-Dwext -c /etc/wpa_supplicant/wpa_supplicant.conf" |
| 59 |
config_wlan0=("dhcp") |
| 60 |
dhcpcd_wlan0="-t 5 -A" |
| 61 |
|
| 62 |
pre-up(){ |
| 63 |
ifconfig wlan0 up |
| 64 |
} |
| 65 |
|
| 66 |
-and the error: |
| 67 |
/etc/init.d/net.wlan0 start |
| 68 |
* Starting wlan0 |
| 69 |
* Configuring wireless network for wlan0 |
| 70 |
* WEP key is not set for "baladei-wifi" - not connecting |
| 71 |
* WEP key is not set for "linksys" - not connecting |
| 72 |
* Couldn't associate with any access points on wlan0 |
| 73 |
* Failed to configure wireless for wlan0 [ !! ] |
| 74 |
|
| 75 |
|
| 76 |
|
| 77 |
I need to connect to my linksys WRT54GL which is set to wpa-personal / wpa algorithm: TKIP, no WEP. |
| 78 |
|
| 79 |
|
| 80 |
|
| 81 |
Please advise since I'm getting very confused. |
| 82 |
|
| 83 |
|
| 84 |
Thank you in advance. |
| 85 |
|
| 86 |
|
| 87 |
|
| 88 |
|
| 89 |
|
| 90 |
|
| 91 |
|
| 92 |
|
| 93 |
____________________________________________________________________________________ |
| 94 |
Looking for last minute shopping deals? |
| 95 |
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping |
Archives