1 |
On Sat, 2006-06-17 at 19:22 -0700, Alan wrote: |
2 |
> Alternatively if camille is the local server, try setting the database |
3 |
> hostname in the mythtv set up to localhost instead. |
4 |
> |
5 |
> -- |
6 |
> Alan <alan@×××××.org> - http://arcterex.net |
7 |
> -------------------------------------------------------------------- |
8 |
> "Backups are for people who don't pray." -- big Mike |
9 |
|
10 |
I figured out how to get mythfrontend to connect to the database. I did |
11 |
what you said and changed "camille" to "localhost". Now I have a new |
12 |
problem; I can't watch LiveTV. I'm not sure why. If I go to Schedule |
13 |
Recordings I see what I expected to see. When I go to Watch LiveTV, I |
14 |
get some funky output in my terminal. Here's the important info: |
15 |
|
16 |
camille mythtv # uname -a |
17 |
Linux camille 2.6.15-gentoo-r1 #1 SMP Thu Jun 15 16:50:26 CDT 2006 i686 |
18 |
Intel(R) Celeron(R) CPU 2.66GHz GNU/Linux |
19 |
|
20 |
camille mythtv # lspci -v |
21 |
. |
22 |
. |
23 |
. |
24 |
05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 |
25 |
(CX23416) MPEG-2 Encoder (rev 01) |
26 |
Subsystem: Hauppauge computer works Inc. WinTV PVR 250 |
27 |
Flags: bus master, medium devsel, latency 64, IRQ 22 |
28 |
Memory at d0000000 (32-bit, prefetchable) [size=64M] |
29 |
Capabilities: [44] Power Management version 2 |
30 |
. |
31 |
. |
32 |
. |
33 |
|
34 |
camille mythtv # dmesg | grep 'ivtv' |
35 |
ivtv: ==================== START INIT IVTV ==================== |
36 |
ivtv: version 0.4.5 (tagged release) loading |
37 |
ivtv: Linux version: 2.6.15-gentoo-r1 SMP 486 gcc-3.4 |
38 |
ivtv: In case of problems please include the debug info between |
39 |
ivtv: the START INIT IVTV and END INIT IVTV lines, along with |
40 |
ivtv: any module options, when mailing the ivtv-users mailinglist. |
41 |
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) |
42 |
ivtv0: Unreasonably low latency timer, setting to 64 (was 32) |
43 |
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] |
44 |
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) |
45 |
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] |
46 |
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) |
47 |
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] |
48 |
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] |
49 |
tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) |
50 |
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] |
51 |
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) |
52 |
ivtv0: Encoder revision: 0x02050032 |
53 |
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB |
54 |
total) |
55 |
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB |
56 |
total) |
57 |
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB |
58 |
total) |
59 |
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB |
60 |
total) |
61 |
ivtv0: Create encoder radio stream |
62 |
ivtv0: Initialized WinTV PVR 250, card #0 |
63 |
ivtv: ==================== END INIT IVTV ==================== |
64 |
ivtv0: All encoder MPEG stream buffers are full. Dropping data. |
65 |
ivtv0: Cause: the application is not reading fast enough. |
66 |
ivtv0: All encoder MPEG stream buffers are full. Dropping data. |
67 |
ivtv0: Cause: the application is not reading fast enough. |
68 |
camille mythtv # |
69 |
|
70 |
|
71 |
michael@camille ~ $ mythfrontend |
72 |
2006-06-17 21:45:31.805 Using runtime prefix = /usr |
73 |
2006-06-17 21:45:31.827 XScreenSaver support enabled |
74 |
2006-06-17 21:45:31.909 New DB connection, total: 1 |
75 |
2006-06-17 21:45:31.947 Connected to database 'mythconverg' at host: |
76 |
localhost |
77 |
2006-06-17 21:45:31.950 Total desktop dim: 1024x768, with 1 screen[s]. |
78 |
2006-06-17 21:45:31.964 Using screen 0, 1024x768 at 0,0 |
79 |
2006-06-17 21:45:31.972 Current Schema Version: 1123 |
80 |
2006-06-17 21:45:31.972 mythfrontend version: 0.19.20060121-2 |
81 |
www.mythtv.org |
82 |
2006-06-17 21:45:31.973 Enabled verbose msgs: important general |
83 |
2006-06-17 21:45:32.158 lang0: eng |
84 |
2006-06-17 21:45:32.158 lang: eng |
85 |
2006-06-17 21:45:32.192 lang1: eng |
86 |
2006-06-17 21:45:32.193 lang: eng |
87 |
2006-06-17 21:45:32.310 Total desktop dim: 1024x768, with 1 screen[s]. |
88 |
2006-06-17 21:45:32.313 Using screen 0, 1024x768 at 0,0 |
89 |
2006-06-17 21:45:32.323 Switching to square mode (G.A.N.T.) |
90 |
mythtv: could not connect to socket |
91 |
mythtv: No such file or directory |
92 |
lirc_init failed for mythtv, see preceding messages |
93 |
2006-06-17 21:45:32.756 Joystick disabled. |
94 |
2006-06-17 21:45:32.849 Registering Internal as a media playback plugin. |
95 |
2006-06-17 21:45:37.001 New DB connection, total: 2 |
96 |
2006-06-17 21:45:37.002 Connected to database 'mythconverg' at host: |
97 |
localhost |
98 |
2006-06-17 21:45:37.052 Connecting to backend server: 192.168.1.3:6543 |
99 |
(try 1 of 5) |
100 |
2006-06-17 21:45:57.058 ReadStringList timeout (quick). |
101 |
2006-06-17 21:45:57.059 Unexpected response to MYTH_PROTO_VERSION: |
102 |
2006-06-17 21:45:57.071 TV: Attempting to change from None to None |
103 |
^C |
104 |
michael@camille ~ $ |
105 |
|
106 |
|
107 |
Can anyone help me make sense of this output? |
108 |
|
109 |
|
110 |
-- |
111 |
gentoo-user@g.o mailing list |