| 1 |
> Hmmm - sounds like its seen 868 read/write errors. However to advise you |
| 2 |
> better we need to see the output. I suspect it is huge because there are |
| 3 |
> error details for each of the 868 errors. How about post the first 200 |
| 4 |
> lines of the smartctl output to the list? |
| 5 |
|
| 6 |
Here are the first 91 lines. After that it looks like error |
| 7 |
specifics. Please let me know what you think or if you need more |
| 8 |
info. |
| 9 |
|
| 10 |
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen |
| 11 |
Home page is http://smartmontools.sourceforge.net/ |
| 12 |
|
| 13 |
=== START OF INFORMATION SECTION === |
| 14 |
Model Family: Fujitsu MHT2xxxAT/MHU2100AT series |
| 15 |
Device Model: FUJITSU MHT2040AT |
| 16 |
Serial Number: NN50T481446T |
| 17 |
Firmware Version: 0022 |
| 18 |
User Capacity: 40,007,761,920 bytes |
| 19 |
Device is: In smartctl database [for details use: -P show] |
| 20 |
ATA Version is: 6 |
| 21 |
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a |
| 22 |
Local Time is: Sat Jan 27 15:47:38 2007 UTC |
| 23 |
SMART support is: Available - device has SMART capability. |
| 24 |
SMART support is: Enabled |
| 25 |
|
| 26 |
=== START OF READ SMART DATA SECTION === |
| 27 |
SMART overall-health self-assessment test result: PASSED |
| 28 |
|
| 29 |
General SMART Values: |
| 30 |
Offline data collection status: (0x00) Offline data collection activity |
| 31 |
was never started. |
| 32 |
Auto Offline Data Collection: Disabled. |
| 33 |
Self-test execution status: ( 0) The previous self-test routine completed |
| 34 |
without error or no self-test has ever |
| 35 |
been run. |
| 36 |
Total time to complete Offline |
| 37 |
data collection: ( 293) seconds. |
| 38 |
Offline data collection |
| 39 |
capabilities: (0x7b) SMART execute Offline immediate. |
| 40 |
Auto Offline data collection |
| 41 |
on/off support. |
| 42 |
Suspend Offline collection upon new |
| 43 |
command. |
| 44 |
Offline surface scan supported. |
| 45 |
Self-test supported. |
| 46 |
Conveyance Self-test supported. |
| 47 |
Selective Self-test supported. |
| 48 |
SMART capabilities: (0x0003) Saves SMART data before entering |
| 49 |
power-saving mode. |
| 50 |
Supports SMART auto save timer. |
| 51 |
Error logging capability: (0x01) Error logging supported. |
| 52 |
No General Purpose Logging support. |
| 53 |
Short self-test routine |
| 54 |
recommended polling time: ( 2) minutes. |
| 55 |
Extended self-test routine |
| 56 |
recommended polling time: ( 40) minutes. |
| 57 |
Conveyance self-test routine |
| 58 |
recommended polling time: ( 2) minutes. |
| 59 |
|
| 60 |
SMART Attributes Data Structure revision number: 16 |
| 61 |
Vendor Specific SMART Attributes with Thresholds: |
| 62 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
| 63 |
UPDATED WHEN_FAILED RAW_VALUE |
| 64 |
1 Raw_Read_Error_Rate 0x000f 100 093 046 Pre-fail |
| 65 |
Always - 169149 |
| 66 |
2 Throughput_Performance 0x0005 100 100 030 Pre-fail |
| 67 |
Offline - 15663104 |
| 68 |
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail |
| 69 |
Always - 0 |
| 70 |
4 Start_Stop_Count 0x0032 099 099 000 Old_age |
| 71 |
Always - 1012 |
| 72 |
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail |
| 73 |
Always - 8559870279687 |
| 74 |
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail |
| 75 |
Always - 3006 |
| 76 |
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail |
| 77 |
Offline - 0 |
| 78 |
9 Power_On_Seconds 0x0032 075 075 000 Old_age |
| 79 |
Always - 12656h+03m+48s |
| 80 |
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail |
| 81 |
Always - 0 |
| 82 |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age |
| 83 |
Always - 926 |
| 84 |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age |
| 85 |
Always - 103 |
| 86 |
193 Load_Cycle_Count 0x0032 066 066 000 Old_age |
| 87 |
Always - 340716 |
| 88 |
194 Temperature_Celsius 0x0022 100 070 000 Old_age |
| 89 |
Always - 43 (Lifetime Min/Max 13/66) |
| 90 |
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age |
| 91 |
Always - 4244 |
| 92 |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age |
| 93 |
Always - 124838871047 |
| 94 |
197 Current_Pending_Sector 0x0012 091 091 000 Old_age |
| 95 |
Always - 10 |
| 96 |
198 Offline_Uncorrectable 0x0010 092 092 000 Old_age |
| 97 |
Offline - 16 |
| 98 |
199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age |
| 99 |
Always - 143 |
| 100 |
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail |
| 101 |
Always - 28028 |
| 102 |
203 Run_Out_Cancel 0x0002 100 100 000 Old_age |
| 103 |
Always - 433780032038 |
| 104 |
SMART Error Log Version: 1 |
| 105 |
ATA Error Count: 868 (device log contains only the most recent five errors) |
| 106 |
CR = Command Register [HEX] |
| 107 |
FR = Features Register [HEX] |
| 108 |
SC = Sector Count Register [HEX] |
| 109 |
SN = Sector Number Register [HEX] |
| 110 |
CL = Cylinder Low Register [HEX] |
| 111 |
CH = Cylinder High Register [HEX] |
| 112 |
DH = Device/Head Register [HEX] |
| 113 |
DC = Device Command Register [HEX] |
| 114 |
ER = Error register [HEX] |
| 115 |
ST = Status register [HEX] |
| 116 |
Powered_Up_Time is measured from power on, and printed as |
| 117 |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
| 118 |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
| 119 |
|
| 120 |
Error 868 occurred at disk power-on lifetime: 12653 hours (527 days + 5 hours) |
| 121 |
When the command that caused the error occurred, the device was |
| 122 |
active or idle. |
| 123 |
|
| 124 |
- Grant |
| 125 |
-- |
| 126 |
gentoo-user@g.o mailing list |
Archives